Well, if you're sure you have the right port (/dev/ttyUSB0), and you have correctly completed the test (a couple of enters, followed by ENTER, all caps) and you got nothing back, then that is as definitive a test that I know of that you have a connectivity problem.
Do you have a USB version of the logger? Or, if you have a serial version, are you using a serial-to-usb converter? Either way, make sure your computer is recognizing the USB connection to the logger: *lsusb* If you have a serial version of the logger (very rare these days), then what serial port are you plugging it into? On Thu, Mar 4, 2021 at 11:59 AM monmul <[email protected]> wrote: > Yes, apologies....was in a rush typing and did not review....."new > envoy"......it should be...and "initiation" is the other typo! > > On Friday, 5 March 2021 at 08:33:36 UTC+13 gjr80 wrote: > >> ‘new’ envoy? >> >> Gary >> >> On Friday, 5 March 2021 at 01:39:10 UTC+10 [email protected] wrote: >> >>> What do you mean by "net Envoy"? If you are using a serial port like >>> /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a >>> network connector. Or, are you using an IP logger? >>> >>> On Wed, Mar 3, 2021 at 8:38 PM monmul <[email protected]> wrote: >>> >>>> I have not had time to do the reseating yet....hopefully later today. >>>> One thing strikes me (probably becuase it has been so long since I set it >>>> up) I just switched envoys, how does the net envoy know what to do...I have >>>> not gone to any itiation or set up page etc....I just plugged and supposed >>>> it would go. Am I missing something? >>>> >>>> On Sunday, 28 February 2021 at 19:42:44 UTC+13 monmul wrote: >>>> >>>>> Thank you, I will give that a try! >>>>> >>>>> On Sunday, 28 February 2021 at 19:31:21 UTC+13 gjr80 wrote: >>>>> >>>>>> Reseat means to remove the logger from the Envoy and then reinstall >>>>>> the logger in the Envoy. Sometimes you can get a dodgy connection between >>>>>> pins on the logger and the socket in the Envoy (or console) and remaking >>>>>> the connection by reseating can sometimes fix this. >>>>>> >>>>>> Gary >>>>>> >>>>>> On Sunday, 28 February 2021 at 12:53:17 UTC+10 monmul wrote: >>>>>> >>>>>>> Sorry, I don't quite understand what you mean by "reseat"? >>>>>>> >>>>>>> On Sunday, 28 February 2021 at 14:40:11 UTC+13 [email protected] >>>>>>> wrote: >>>>>>> >>>>>>>> You can try reseating the logger. >>>>>>>> >>>>>>>> On Sat, Feb 27, 2021 at 5:16 PM monmul <[email protected]> wrote: >>>>>>>> >>>>>>>>> Neither TEST nor NVER returns anything....so, I guess I have a >>>>>>>>> connectivity problem....which seems strange as I did a straight swap >>>>>>>>> out >>>>>>>>> of the Envoys! >>>>>>>>> >>>>>>>>> On Sunday, 28 February 2021 at 13:33:34 UTC+13 [email protected] >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> If the cursor went down the screen, then the console is sending >>>>>>>>>> something back. Make sure you press <enter> a few times, then >>>>>>>>>> "TEST", all >>>>>>>>>> in capital letters. >>>>>>>>>> >>>>>>>>>> You can also type "NVER". Again, all in capital letters. This >>>>>>>>>> will return the firmware version number. >>>>>>>>>> >>>>>>>>>> If neither of those work, then you have a connectivity problem. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Sat, Feb 27, 2021 at 3:54 PM monmul <[email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> The screen shows blank when I get to the point above.....after >>>>>>>>>>> hitting enter a few times, it just sends the cursor down the >>>>>>>>>>> screen......I >>>>>>>>>>> tried typing TEST but no response...just a dark screen in the CL >>>>>>>>>>> window. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: >>>>>>>>>>> >>>>>>>>>>>> That’s a better start, did you hit enter a few times and then >>>>>>>>>>>> send TEST as per the wiki article >>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>? >>>>>>>>>>>> You should get a response from the Envoy. >>>>>>>>>>>> >>>>>>>>>>>> Gary >>>>>>>>>>>> >>>>>>>>>>>> On Sunday, 28 February 2021 at 08:04:10 UTC+10 monmul wrote: >>>>>>>>>>>> >>>>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>>>> minicom: cannot open /dev/ttyUSB0: Device or resource busy >>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Welcome to minicom 2.7 >>>>>>>>>>>>> >>>>>>>>>>>>> OPTIONS: I18n >>>>>>>>>>>>> Compiled on Apr 22 2017, 09:14:19. >>>>>>>>>>>>> Port /dev/ttyUSB0, 11:00:42 >>>>>>>>>>>>> >>>>>>>>>>>>> Press CTRL-A Z for help on special keys >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Saturday, 27 February 2021 at 02:19:42 UTC+13 >>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Monmul, we have not definitively heard whether or not you are >>>>>>>>>>>>>> able to do the test listed under *Establishing connectivity >>>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>* >>>>>>>>>>>>>> in >>>>>>>>>>>>>> the Wiki.That is an essential first step. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Use either screen or minicom. You may have to preface the >>>>>>>>>>>>>> command with 'sudo'. For example, >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> *sudo screen /dev/ttyUSB0 19200* >>>>>>>>>>>>>> >>>>>>>>>>>>>> -tk >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Feb 25, 2021 at 7:34 PM monmul <[email protected]> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx >>>>>>>>>>>>>>> weather system... >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>> Initializing weewx version 4.4.0 >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Using >>>>>>>>>>>>>>> Python 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 >>>>>>>>>>>>>>> 20170516] >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>> Platform Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Locale >>>>>>>>>>>>>>> is 'en_NZ.UTF-8' >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: PID >>>>>>>>>>>>>>> file is /var/run/weewx.pid >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17954]: Starting weewx >>>>>>>>>>>>>>> weather system: weewx. >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi systemd[1]: Started LSB: weewx >>>>>>>>>>>>>>> weather system. >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Using >>>>>>>>>>>>>>> configuration file /etc/weewx/weewx.conf >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Debug >>>>>>>>>>>>>>> is 1 >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG __main__: >>>>>>>>>>>>>>> Initializing engine >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO weewx.engine: >>>>>>>>>>>>>>> Loading station type Vantage (weewx.drivers.vantage) >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>> weewx.drivers.vantage: Driver version is 3.2.1 >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>> weewx.drivers.vantage: Option loop_request=1 >>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>> weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud >>>>>>>>>>>>>>> 19200; >>>>>>>>>>>>>>> timeout 4.00 >>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #0 failed >>>>>>>>>>>>>>> Feb 26 16:31:40 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #1 failed >>>>>>>>>>>>>>> Feb 26 16:31:44 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #2 failed >>>>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #3 failed >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR >>>>>>>>>>>>>>> weewx.drivers.vantage: Unable to wake up console >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.engine: >>>>>>>>>>>>>>> Import of driver failed: Unable to wake up Vantage console >>>>>>>>>>>>>>> (<class >>>>>>>>>>>>>>> 'weewx.WakeupError'>) >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** Traceback (most recent call last): >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>> "/usr/share/weewx/weewx/engine.py", line >>>>>>>>>>>>>>> 119, in setupStation >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** self.console = >>>>>>>>>>>>>>> loader_function(config_dict, >>>>>>>>>>>>>>> self) >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>> line 39, in loader >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** return VantageService(engine, >>>>>>>>>>>>>>> config_dict) >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>> line 1898, in __init__ >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** Vantage.__init__(self, >>>>>>>>>>>>>>> **config_dict[DRIVER_NAME]) >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>> line 515, in __init__ >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** self._setup() >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>> line 1317, in _setup >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** >>>>>>>>>>>>>>> self.port.wakeup_console(max_tries=self.max_tries) >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>> line 118, in wakeup_console >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** raise weewx.WakeupError("Unable to >>>>>>>>>>>>>>> wake up >>>>>>>>>>>>>>> Vantage console") >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>> weewx.engine: **** WakeupError: Unable to wake up Vantage >>>>>>>>>>>>>>> console >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>>>> Unable to load driver: Unable to wake up Vantage console >>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>>>> **** Exiting... >>>>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Friday, 26 February 2021 at 11:19:41 UTC+13 vince wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> So go ahead and restart it now. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>>>>>>> screen: no process found >>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen >>>>>>>>>>>>>>>>> pi 3809 11222 0 10:01 pts/1 00:00:00 grep >>>>>>>>>>>>>>>>> --color=auto -e weewxd -e screen >>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 21:57:53 UTC+13 >>>>>>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> vnc makes no relevant difference. >>>>>>>>>>>>>>>>>> command = ‘screen’ below shows program ‘screen’ has a >>>>>>>>>>>>>>>>>> ‘pi’ user process open on /dev/ttyUSB0 at the moment. not >>>>>>>>>>>>>>>>>> weewxd. probably >>>>>>>>>>>>>>>>>> left over from earlier troubleshooting. >>>>>>>>>>>>>>>>>> kill it with “sudo killall screen”. >>>>>>>>>>>>>>>>>> check if any weewxd’s or screen’s hanging around with “ps >>>>>>>>>>>>>>>>>> -ef | grep -e weewxd -e screen”. kill them if you find any. >>>>>>>>>>>>>>>>>> you should now be back to a clean state with /devttyUSB0 >>>>>>>>>>>>>>>>>> ready for opening. do “sudo lsof /dev/ttyUSB0” to be sure >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On 25 Feb 2021, at 5:24 pm, gjr80 <[email protected]> >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I don't know, I'm a SSH only person, I am getting out of >>>>>>>>>>>>>>>>>> my depth now. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I am using VNC Viewer (and always have) rather than >>>>>>>>>>>>>>>>>>> SSH....not sure if that makes any difference? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 >>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hmm, different to my Davis on my RPi which shows weewxd >>>>>>>>>>>>>>>>>>>> rather than screen. I will have to defer to Tom or someone >>>>>>>>>>>>>>>>>>>> who knows about >>>>>>>>>>>>>>>>>>>> screen. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file >>>>>>>>>>>>>>>>>>>>> system /run/user/1000/gvfs >>>>>>>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>>>>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE >>>>>>>>>>>>>>>>>>>>> NAME >>>>>>>>>>>>>>>>>>>>> screen 16582 pi 6u CHR 188,0 0t0 20196 >>>>>>>>>>>>>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com >>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>> . >>>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com >>>> <https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/65d07904-ffac-4481-b934-c0574bb09c24n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/65d07904-ffac-4481-b934-c0574bb09c24n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEBiPt6-4L5zsr1dX98YyEjgM3DY0jUoYdYeRNynQ%2BX%3DRg%40mail.gmail.com.
