The device "Future Technologies" is probably your Envoy. On Thu, Mar 4, 2021 at 1:35 PM monmul <[email protected]> wrote:
> Not using serial...using USB. > > On Friday, 5 March 2021 at 10:34:32 UTC+13 monmul wrote: > >> pi@WeatherPi:~ $ lsusb >> Bus 001 Device 006: ID 0403:6001 Future Technology Devices International, >> Ltd FT232 Serial (UART) IC >> Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash >> drive >> Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub >> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. >> SMSC9512/9514 Fast Ethernet Adapter >> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> pi@WeatherPi:~ $ >> >> >> On Friday, 5 March 2021 at 09:05:34 UTC+13 [email protected] wrote: >> >>> Well, if you're sure you have the right port (/dev/ttyUSB0), and you >>> have correctly completed the test (a couple of enters, followed by ENTER, >>> all caps) and you got nothing back, then that is as definitive a test that >>> I know of that you have a connectivity problem. >>> >>> Do you have a USB version of the logger? Or, if you have a serial >>> version, are you using a serial-to-usb converter? Either way, make sure >>> your computer is recognizing the USB connection to the logger: >>> >>> *lsusb* >>> >>> If you have a serial version of the logger (very rare these days), then >>> what serial port are you plugging it into? >>> >>> >>> >>> On Thu, Mar 4, 2021 at 11:59 AM monmul <[email protected]> wrote: >>> >>>> Yes, apologies....was in a rush typing and did not review....."new >>>> envoy"......it should be...and "initiation" is the other typo! >>>> >>>> On Friday, 5 March 2021 at 08:33:36 UTC+13 gjr80 wrote: >>>> >>>>> ‘new’ envoy? >>>>> >>>>> Gary >>>>> >>>>> On Friday, 5 March 2021 at 01:39:10 UTC+10 [email protected] wrote: >>>>> >>>>>> What do you mean by "net Envoy"? If you are using a serial port like >>>>>> /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a >>>>>> network connector. Or, are you using an IP logger? >>>>>> >>>>>> On Wed, Mar 3, 2021 at 8:38 PM monmul <[email protected]> wrote: >>>>>> >>>>>>> I have not had time to do the reseating yet....hopefully later >>>>>>> today. One thing strikes me (probably becuase it has been so long since >>>>>>> I >>>>>>> set it up) I just switched envoys, how does the net envoy know what to >>>>>>> do...I have not gone to any itiation or set up page etc....I just >>>>>>> plugged >>>>>>> and supposed it would go. Am I missing something? >>>>>>> >>>>>>> On Sunday, 28 February 2021 at 19:42:44 UTC+13 monmul wrote: >>>>>>> >>>>>>>> Thank you, I will give that a try! >>>>>>>> >>>>>>>> On Sunday, 28 February 2021 at 19:31:21 UTC+13 gjr80 wrote: >>>>>>>> >>>>>>>>> Reseat means to remove the logger from the Envoy and then >>>>>>>>> reinstall the logger in the Envoy. Sometimes you can get a dodgy >>>>>>>>> connection >>>>>>>>> between pins on the logger and the socket in the Envoy (or console) >>>>>>>>> and >>>>>>>>> remaking the connection by reseating can sometimes fix this. >>>>>>>>> >>>>>>>>> Gary >>>>>>>>> >>>>>>>>> On Sunday, 28 February 2021 at 12:53:17 UTC+10 monmul wrote: >>>>>>>>> >>>>>>>>>> Sorry, I don't quite understand what you mean by "reseat"? >>>>>>>>>> >>>>>>>>>> On Sunday, 28 February 2021 at 14:40:11 UTC+13 [email protected] >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> You can try reseating the logger. >>>>>>>>>>> >>>>>>>>>>> On Sat, Feb 27, 2021 at 5:16 PM monmul <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Neither TEST nor NVER returns anything....so, I guess I have a >>>>>>>>>>>> connectivity problem....which seems strange as I did a straight >>>>>>>>>>>> swap out >>>>>>>>>>>> of the Envoys! >>>>>>>>>>>> >>>>>>>>>>>> On Sunday, 28 February 2021 at 13:33:34 UTC+13 [email protected] >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> If the cursor went down the screen, then the console is >>>>>>>>>>>>> sending something back. Make sure you press <enter> a few times, >>>>>>>>>>>>> then >>>>>>>>>>>>> "TEST", all in capital letters. >>>>>>>>>>>>> >>>>>>>>>>>>> You can also type "NVER". Again, all in capital letters. This >>>>>>>>>>>>> will return the firmware version number. >>>>>>>>>>>>> >>>>>>>>>>>>> If neither of those work, then you have a connectivity problem. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Sat, Feb 27, 2021 at 3:54 PM monmul <[email protected]> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> The screen shows blank when I get to the point >>>>>>>>>>>>>> above.....after hitting enter a few times, it just sends the >>>>>>>>>>>>>> cursor down >>>>>>>>>>>>>> the screen......I tried typing TEST but no response...just a >>>>>>>>>>>>>> dark screen in >>>>>>>>>>>>>> the CL window. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> That’s a better start, did you hit enter a few times and >>>>>>>>>>>>>>> then send TEST as per the wiki article >>>>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>? >>>>>>>>>>>>>>> You should get a response from the Envoy. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Sunday, 28 February 2021 at 08:04:10 UTC+10 monmul wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>>>>>>> minicom: cannot open /dev/ttyUSB0: Device or resource busy >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Welcome to minicom 2.7 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> OPTIONS: I18n >>>>>>>>>>>>>>>> Compiled on Apr 22 2017, 09:14:19. >>>>>>>>>>>>>>>> Port /dev/ttyUSB0, 11:00:42 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Press CTRL-A Z for help on special keys >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Saturday, 27 February 2021 at 02:19:42 UTC+13 >>>>>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Monmul, we have not definitively heard whether or not you >>>>>>>>>>>>>>>>> are able to do the test listed under *Establishing >>>>>>>>>>>>>>>>> connectivity >>>>>>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>* >>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>> the Wiki.That is an essential first step. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Use either screen or minicom. You may have to preface the >>>>>>>>>>>>>>>>> command with 'sudo'. For example, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *sudo screen /dev/ttyUSB0 19200* >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Thu, Feb 25, 2021 at 7:34 PM monmul <[email protected]> >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx >>>>>>>>>>>>>>>>>> weather system... >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>>>>> Initializing weewx version 4.4.0 >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>>>>> Using Python 2.7.13 (default, Aug 22 2020, 10:03:02) >>>>>>>>>>>>>>>>>> #012[GCC 6.3.0 >>>>>>>>>>>>>>>>>> 20170516] >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>>>>> Platform Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>>>>>> Locale is 'en_NZ.UTF-8' >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: PID >>>>>>>>>>>>>>>>>> file is /var/run/weewx.pid >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17954]: Starting weewx >>>>>>>>>>>>>>>>>> weather system: weewx. >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi systemd[1]: Started LSB: weewx >>>>>>>>>>>>>>>>>> weather system. >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: >>>>>>>>>>>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: >>>>>>>>>>>>>>>>>> Debug is 1 >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG __main__: >>>>>>>>>>>>>>>>>> Initializing engine >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO weewx.engine: >>>>>>>>>>>>>>>>>> Loading station type Vantage (weewx.drivers.vantage) >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>>> weewx.drivers.vantage: Driver version is 3.2.1 >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>>> weewx.drivers.vantage: Option loop_request=1 >>>>>>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>>> weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; >>>>>>>>>>>>>>>>>> baud 19200; >>>>>>>>>>>>>>>>>> timeout 4.00 >>>>>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: soliciting >>>>>>>>>>>>>>>>>> a DHCPv6 lease >>>>>>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #0 failed >>>>>>>>>>>>>>>>>> Feb 26 16:31:40 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #1 failed >>>>>>>>>>>>>>>>>> Feb 26 16:31:44 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #2 failed >>>>>>>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: soliciting >>>>>>>>>>>>>>>>>> a DHCPv6 lease >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>>>>>> weewx.drivers.vantage: Retry #3 failed >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR >>>>>>>>>>>>>>>>>> weewx.drivers.vantage: Unable to wake up console >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR >>>>>>>>>>>>>>>>>> weewx.engine: Import of driver failed: Unable to wake up >>>>>>>>>>>>>>>>>> Vantage console >>>>>>>>>>>>>>>>>> (<class 'weewx.WakeupError'>) >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** Traceback (most recent call last): >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/engine.py", line >>>>>>>>>>>>>>>>>> 119, in setupStation >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** self.console = >>>>>>>>>>>>>>>>>> loader_function(config_dict, >>>>>>>>>>>>>>>>>> self) >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>>> line 39, in loader >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** return VantageService(engine, >>>>>>>>>>>>>>>>>> config_dict) >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>>> line 1898, in __init__ >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** Vantage.__init__(self, >>>>>>>>>>>>>>>>>> **config_dict[DRIVER_NAME]) >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>>> line 515, in __init__ >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** self._setup() >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>>> line 1317, in _setup >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** >>>>>>>>>>>>>>>>>> self.port.wakeup_console(max_tries=self.max_tries) >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>>>>>> line 118, in wakeup_console >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** raise weewx.WakeupError("Unable >>>>>>>>>>>>>>>>>> to wake up >>>>>>>>>>>>>>>>>> Vantage console") >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> weewx.engine: **** WakeupError: Unable to wake up >>>>>>>>>>>>>>>>>> Vantage console >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>>>>>>> Unable to load driver: Unable to wake up Vantage console >>>>>>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>>>>>> __main__: **** Exiting... >>>>>>>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: soliciting >>>>>>>>>>>>>>>>>> a DHCPv6 lease >>>>>>>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: soliciting >>>>>>>>>>>>>>>>>> a DHCPv6 lease >>>>>>>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: soliciting >>>>>>>>>>>>>>>>>> a DHCPv6 lease >>>>>>>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: soliciting >>>>>>>>>>>>>>>>>> a DHCPv6 lease >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Friday, 26 February 2021 at 11:19:41 UTC+13 vince >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> So go ahead and restart it now. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 >>>>>>>>>>>>>>>>>>> monmul wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>>>>>>>>>> screen: no process found >>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen >>>>>>>>>>>>>>>>>>>> pi 3809 11222 0 10:01 pts/1 00:00:00 grep >>>>>>>>>>>>>>>>>>>> --color=auto -e weewxd -e screen >>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 21:57:53 UTC+13 >>>>>>>>>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> vnc makes no relevant difference. >>>>>>>>>>>>>>>>>>>>> command = ‘screen’ below shows program ‘screen’ has a >>>>>>>>>>>>>>>>>>>>> ‘pi’ user process open on /dev/ttyUSB0 at the moment. not >>>>>>>>>>>>>>>>>>>>> weewxd. probably >>>>>>>>>>>>>>>>>>>>> left over from earlier troubleshooting. >>>>>>>>>>>>>>>>>>>>> kill it with “sudo killall screen”. >>>>>>>>>>>>>>>>>>>>> check if any weewxd’s or screen’s hanging around with >>>>>>>>>>>>>>>>>>>>> “ps -ef | grep -e weewxd -e screen”. kill them if you >>>>>>>>>>>>>>>>>>>>> find any. >>>>>>>>>>>>>>>>>>>>> you should now be back to a clean state with >>>>>>>>>>>>>>>>>>>>> /devttyUSB0 ready for opening. do “sudo lsof >>>>>>>>>>>>>>>>>>>>> /dev/ttyUSB0” to be sure >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On 25 Feb 2021, at 5:24 pm, gjr80 <[email protected]> >>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I don't know, I'm a SSH only person, I am getting out >>>>>>>>>>>>>>>>>>>>> of my depth now. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 16:21:11 UTC+10 >>>>>>>>>>>>>>>>>>>>> monmul wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I am using VNC Viewer (and always have) rather than >>>>>>>>>>>>>>>>>>>>>> SSH....not sure if that makes any difference? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 >>>>>>>>>>>>>>>>>>>>>> gjr80 wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hmm, different to my Davis on my RPi which shows >>>>>>>>>>>>>>>>>>>>>>> weewxd rather than screen. I will have to defer to Tom >>>>>>>>>>>>>>>>>>>>>>> or someone who knows >>>>>>>>>>>>>>>>>>>>>>> about screen. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 >>>>>>>>>>>>>>>>>>>>>>> monmul wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): >>>>>>>>>>>>>>>>>>>>>>>> weewx.service. >>>>>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file >>>>>>>>>>>>>>>>>>>>>>>> system /run/user/1000/gvfs >>>>>>>>>>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>>>>>>>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF >>>>>>>>>>>>>>>>>>>>>>>> NODE NAME >>>>>>>>>>>>>>>>>>>>>>>> screen 16582 pi 6u CHR 188,0 0t0 >>>>>>>>>>>>>>>>>>>>>>>> 20196 /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>> from it, send an email to [email protected] >>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com >>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>>> >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com >>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com >>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/65d07904-ffac-4481-b934-c0574bb09c24n%40googlegroups.com >>>> <https://groups.google.com/d/msgid/weewx-user/65d07904-ffac-4481-b934-c0574bb09c24n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/e3682325-ba57-4be0-b403-2e25accd854dn%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/e3682325-ba57-4be0-b403-2e25accd854dn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEARaGz8TNBoUyj3dRZ7macjmOA9HDU9PYuK3aovOhtNSA%40mail.gmail.com.
