‘new’ logger? Gary
On Friday, 5 March 2021 at 01:39:10 UTC+10 [email protected] wrote: > What do you mean by "net Envoy"? If you are using a serial port like > /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a > network connector. Or, are you using an IP logger? > > On Wed, Mar 3, 2021 at 8:38 PM monmul <[email protected]> wrote: > >> I have not had time to do the reseating yet....hopefully later today. One >> thing strikes me (probably becuase it has been so long since I set it up) I >> just switched envoys, how does the net envoy know what to do...I have not >> gone to any itiation or set up page etc....I just plugged and supposed it >> would go. Am I missing something? >> >> On Sunday, 28 February 2021 at 19:42:44 UTC+13 monmul wrote: >> >>> Thank you, I will give that a try! >>> >>> On Sunday, 28 February 2021 at 19:31:21 UTC+13 gjr80 wrote: >>> >>>> Reseat means to remove the logger from the Envoy and then reinstall the >>>> logger in the Envoy. Sometimes you can get a dodgy connection between pins >>>> on the logger and the socket in the Envoy (or console) and remaking the >>>> connection by reseating can sometimes fix this. >>>> >>>> Gary >>>> >>>> On Sunday, 28 February 2021 at 12:53:17 UTC+10 monmul wrote: >>>> >>>>> Sorry, I don't quite understand what you mean by "reseat"? >>>>> >>>>> On Sunday, 28 February 2021 at 14:40:11 UTC+13 [email protected] wrote: >>>>> >>>>>> You can try reseating the logger. >>>>>> >>>>>> On Sat, Feb 27, 2021 at 5:16 PM monmul <[email protected]> wrote: >>>>>> >>>>>>> Neither TEST nor NVER returns anything....so, I guess I have a >>>>>>> connectivity problem....which seems strange as I did a straight swap >>>>>>> out >>>>>>> of the Envoys! >>>>>>> >>>>>>> On Sunday, 28 February 2021 at 13:33:34 UTC+13 [email protected] >>>>>>> wrote: >>>>>>> >>>>>>>> If the cursor went down the screen, then the console is sending >>>>>>>> something back. Make sure you press <enter> a few times, then "TEST", >>>>>>>> all >>>>>>>> in capital letters. >>>>>>>> >>>>>>>> You can also type "NVER". Again, all in capital letters. This will >>>>>>>> return the firmware version number. >>>>>>>> >>>>>>>> If neither of those work, then you have a connectivity problem. >>>>>>>> >>>>>>>> >>>>>>>> On Sat, Feb 27, 2021 at 3:54 PM monmul <[email protected]> wrote: >>>>>>>> >>>>>>>>> The screen shows blank when I get to the point above.....after >>>>>>>>> hitting enter a few times, it just sends the cursor down the >>>>>>>>> screen......I >>>>>>>>> tried typing TEST but no response...just a dark screen in the CL >>>>>>>>> window. >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: >>>>>>>>> >>>>>>>>>> That’s a better start, did you hit enter a few times and then >>>>>>>>>> send TEST as per the wiki article >>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>? >>>>>>>>>> >>>>>>>>>> You should get a response from the Envoy. >>>>>>>>>> >>>>>>>>>> Gary >>>>>>>>>> >>>>>>>>>> On Sunday, 28 February 2021 at 08:04:10 UTC+10 monmul wrote: >>>>>>>>>> >>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>> minicom: cannot open /dev/ttyUSB0: Device or resource busy >>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Welcome to minicom 2.7 >>>>>>>>>>> >>>>>>>>>>> OPTIONS: I18n >>>>>>>>>>> Compiled on Apr 22 2017, 09:14:19. >>>>>>>>>>> Port /dev/ttyUSB0, 11:00:42 >>>>>>>>>>> >>>>>>>>>>> Press CTRL-A Z for help on special keys >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Saturday, 27 February 2021 at 02:19:42 UTC+13 >>>>>>>>>>> [email protected] wrote: >>>>>>>>>>> >>>>>>>>>>>> Monmul, we have not definitively heard whether or not you are >>>>>>>>>>>> able to do the test listed under *Establishing connectivity >>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>* >>>>>>>>>>>> in >>>>>>>>>>>> the Wiki.That is an essential first step. >>>>>>>>>>>> >>>>>>>>>>>> Use either screen or minicom. You may have to preface the >>>>>>>>>>>> command with 'sudo'. For example, >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> *sudo screen /dev/ttyUSB0 19200* >>>>>>>>>>>> >>>>>>>>>>>> -tk >>>>>>>>>>>> >>>>>>>>>>>> On Thu, Feb 25, 2021 at 7:34 PM monmul <[email protected]> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx >>>>>>>>>>>>> weather system... >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>> Initializing weewx version 4.4.0 >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Using >>>>>>>>>>>>> Python 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 >>>>>>>>>>>>> 20170516] >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Platform >>>>>>>>>>>>> Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Locale >>>>>>>>>>>>> is 'en_NZ.UTF-8' >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: PID file >>>>>>>>>>>>> is /var/run/weewx.pid >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17954]: Starting weewx weather >>>>>>>>>>>>> system: weewx. >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi systemd[1]: Started LSB: weewx >>>>>>>>>>>>> weather system. >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Using >>>>>>>>>>>>> configuration file /etc/weewx/weewx.conf >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Debug is >>>>>>>>>>>>> 1 >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG __main__: >>>>>>>>>>>>> Initializing engine >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO weewx.engine: >>>>>>>>>>>>> Loading station type Vantage (weewx.drivers.vantage) >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>> weewx.drivers.vantage: Driver version is 3.2.1 >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>> weewx.drivers.vantage: Option loop_request=1 >>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>> weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud >>>>>>>>>>>>> 19200; >>>>>>>>>>>>> timeout 4.00 >>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>> weewx.drivers.vantage: Retry #0 failed >>>>>>>>>>>>> Feb 26 16:31:40 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>> weewx.drivers.vantage: Retry #1 failed >>>>>>>>>>>>> Feb 26 16:31:44 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>> weewx.drivers.vantage: Retry #2 failed >>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>> weewx.drivers.vantage: Retry #3 failed >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR >>>>>>>>>>>>> weewx.drivers.vantage: Unable to wake up console >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.engine: >>>>>>>>>>>>> Import of driver failed: Unable to wake up Vantage console >>>>>>>>>>>>> (<class >>>>>>>>>>>>> 'weewx.WakeupError'>) >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** Traceback (most recent call last): >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** File "/usr/share/weewx/weewx/engine.py", line 119, in >>>>>>>>>>>>> setupStation >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** self.console = loader_function(config_dict, self) >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line >>>>>>>>>>>>> 39, in >>>>>>>>>>>>> loader >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** return VantageService(engine, config_dict) >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line >>>>>>>>>>>>> 1898, in >>>>>>>>>>>>> __init__ >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** Vantage.__init__(self, **config_dict[DRIVER_NAME]) >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line >>>>>>>>>>>>> 515, in >>>>>>>>>>>>> __init__ >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** self._setup() >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line >>>>>>>>>>>>> 1317, in >>>>>>>>>>>>> _setup >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** self.port.wakeup_console(max_tries=self.max_tries) >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line >>>>>>>>>>>>> 118, in >>>>>>>>>>>>> wakeup_console >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** raise weewx.WakeupError("Unable to wake up Vantage >>>>>>>>>>>>> console") >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL weewx.engine: >>>>>>>>>>>>> **** WakeupError: Unable to wake up Vantage console >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>> Unable to load driver: Unable to wake up Vantage console >>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>> **** Exiting... >>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Friday, 26 February 2021 at 11:19:41 UTC+13 vince wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> So go ahead and restart it now. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>>>>> screen: no process found >>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>> pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen >>>>>>>>>>>>>>> pi 3809 11222 0 10:01 pts/1 00:00:00 grep >>>>>>>>>>>>>>> --color=auto -e weewxd -e screen >>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 21:57:53 UTC+13 >>>>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> vnc makes no relevant difference. >>>>>>>>>>>>>>>> command = ‘screen’ below shows program ‘screen’ has a ‘pi’ >>>>>>>>>>>>>>>> user process open on /dev/ttyUSB0 at the moment. not weewxd. >>>>>>>>>>>>>>>> probably left >>>>>>>>>>>>>>>> over from earlier troubleshooting. >>>>>>>>>>>>>>>> kill it with “sudo killall screen”. >>>>>>>>>>>>>>>> check if any weewxd’s or screen’s hanging around with “ps >>>>>>>>>>>>>>>> -ef | grep -e weewxd -e screen”. kill them if you find any. >>>>>>>>>>>>>>>> you should now be back to a clean state with /devttyUSB0 >>>>>>>>>>>>>>>> ready for opening. do “sudo lsof /dev/ttyUSB0” to be sure >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On 25 Feb 2021, at 5:24 pm, gjr80 <[email protected]> >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I don't know, I'm a SSH only person, I am getting out of my >>>>>>>>>>>>>>>> depth now. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I am using VNC Viewer (and always have) rather than >>>>>>>>>>>>>>>>> SSH....not sure if that makes any difference? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hmm, different to my Davis on my RPi which shows weewxd >>>>>>>>>>>>>>>>>> rather than screen. I will have to defer to Tom or someone >>>>>>>>>>>>>>>>>> who knows about >>>>>>>>>>>>>>>>>> screen. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME >>>>>>>>>>>>>>>>>>> screen 16582 pi 6u CHR 188,0 0t0 20196 >>>>>>>>>>>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>> >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com >>>>>>>>>>>>> >>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>> . >>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/422609c3-b19a-42d9-ae3f-75ea9022322dn%40googlegroups.com.
