Yes, apologies....was in a rush typing and did not review....."new envoy"......it should be...and "initiation" is the other typo!
On Friday, 5 March 2021 at 08:33:36 UTC+13 gjr80 wrote: > ‘new’ envoy? > > Gary > > On Friday, 5 March 2021 at 01:39:10 UTC+10 [email protected] wrote: > >> What do you mean by "net Envoy"? If you are using a serial port like >> /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a >> network connector. Or, are you using an IP logger? >> >> On Wed, Mar 3, 2021 at 8:38 PM monmul <[email protected]> wrote: >> >>> I have not had time to do the reseating yet....hopefully later today. >>> One thing strikes me (probably becuase it has been so long since I set it >>> up) I just switched envoys, how does the net envoy know what to do...I have >>> not gone to any itiation or set up page etc....I just plugged and supposed >>> it would go. Am I missing something? >>> >>> On Sunday, 28 February 2021 at 19:42:44 UTC+13 monmul wrote: >>> >>>> Thank you, I will give that a try! >>>> >>>> On Sunday, 28 February 2021 at 19:31:21 UTC+13 gjr80 wrote: >>>> >>>>> Reseat means to remove the logger from the Envoy and then reinstall >>>>> the logger in the Envoy. Sometimes you can get a dodgy connection between >>>>> pins on the logger and the socket in the Envoy (or console) and remaking >>>>> the connection by reseating can sometimes fix this. >>>>> >>>>> Gary >>>>> >>>>> On Sunday, 28 February 2021 at 12:53:17 UTC+10 monmul wrote: >>>>> >>>>>> Sorry, I don't quite understand what you mean by "reseat"? >>>>>> >>>>>> On Sunday, 28 February 2021 at 14:40:11 UTC+13 [email protected] >>>>>> wrote: >>>>>> >>>>>>> You can try reseating the logger. >>>>>>> >>>>>>> On Sat, Feb 27, 2021 at 5:16 PM monmul <[email protected]> wrote: >>>>>>> >>>>>>>> Neither TEST nor NVER returns anything....so, I guess I have a >>>>>>>> connectivity problem....which seems strange as I did a straight swap >>>>>>>> out >>>>>>>> of the Envoys! >>>>>>>> >>>>>>>> On Sunday, 28 February 2021 at 13:33:34 UTC+13 [email protected] >>>>>>>> wrote: >>>>>>>> >>>>>>>>> If the cursor went down the screen, then the console is sending >>>>>>>>> something back. Make sure you press <enter> a few times, then "TEST", >>>>>>>>> all >>>>>>>>> in capital letters. >>>>>>>>> >>>>>>>>> You can also type "NVER". Again, all in capital letters. This will >>>>>>>>> return the firmware version number. >>>>>>>>> >>>>>>>>> If neither of those work, then you have a connectivity problem. >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sat, Feb 27, 2021 at 3:54 PM monmul <[email protected]> wrote: >>>>>>>>> >>>>>>>>>> The screen shows blank when I get to the point above.....after >>>>>>>>>> hitting enter a few times, it just sends the cursor down the >>>>>>>>>> screen......I >>>>>>>>>> tried typing TEST but no response...just a dark screen in the CL >>>>>>>>>> window. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Sunday, 28 February 2021 at 11:49:11 UTC+13 gjr80 wrote: >>>>>>>>>> >>>>>>>>>>> That’s a better start, did you hit enter a few times and then >>>>>>>>>>> send TEST as per the wiki article >>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>? >>>>>>>>>>> >>>>>>>>>>> You should get a response from the Envoy. >>>>>>>>>>> >>>>>>>>>>> Gary >>>>>>>>>>> >>>>>>>>>>> On Sunday, 28 February 2021 at 08:04:10 UTC+10 monmul wrote: >>>>>>>>>>> >>>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>>> minicom: cannot open /dev/ttyUSB0: Device or resource busy >>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>> pi@WeatherPi:~ $ minicom -b 19200 -D /dev/ttyUSB0 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Welcome to minicom 2.7 >>>>>>>>>>>> >>>>>>>>>>>> OPTIONS: I18n >>>>>>>>>>>> Compiled on Apr 22 2017, 09:14:19. >>>>>>>>>>>> Port /dev/ttyUSB0, 11:00:42 >>>>>>>>>>>> >>>>>>>>>>>> Press CTRL-A Z for help on special keys >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Saturday, 27 February 2021 at 02:19:42 UTC+13 >>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Monmul, we have not definitively heard whether or not you are >>>>>>>>>>>>> able to do the test listed under *Establishing connectivity >>>>>>>>>>>>> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#establishing-connectivity>* >>>>>>>>>>>>> in >>>>>>>>>>>>> the Wiki.That is an essential first step. >>>>>>>>>>>>> >>>>>>>>>>>>> Use either screen or minicom. You may have to preface the >>>>>>>>>>>>> command with 'sudo'. For example, >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> *sudo screen /dev/ttyUSB0 19200* >>>>>>>>>>>>> >>>>>>>>>>>>> -tk >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, Feb 25, 2021 at 7:34 PM monmul <[email protected]> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Feb 26 16:31:31 WeatherPi systemd[1]: Starting LSB: weewx >>>>>>>>>>>>>> weather system... >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>> Initializing weewx version 4.4.0 >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Using >>>>>>>>>>>>>> Python 2.7.13 (default, Aug 22 2020, 10:03:02) #012[GCC 6.3.0 >>>>>>>>>>>>>> 20170516] >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: >>>>>>>>>>>>>> Platform Linux-4.19.66-v7+-armv7l-with-debian-9.13 >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: Locale >>>>>>>>>>>>>> is 'en_NZ.UTF-8' >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17966] INFO __main__: PID >>>>>>>>>>>>>> file is /var/run/weewx.pid >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17954]: Starting weewx >>>>>>>>>>>>>> weather system: weewx. >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi systemd[1]: Started LSB: weewx >>>>>>>>>>>>>> weather system. >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Using >>>>>>>>>>>>>> configuration file /etc/weewx/weewx.conf >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO __main__: Debug >>>>>>>>>>>>>> is 1 >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG __main__: >>>>>>>>>>>>>> Initializing engine >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] INFO weewx.engine: >>>>>>>>>>>>>> Loading station type Vantage (weewx.drivers.vantage) >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>> weewx.drivers.vantage: Driver version is 3.2.1 >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>> weewx.drivers.vantage: Option loop_request=1 >>>>>>>>>>>>>> Feb 26 16:31:32 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>> weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud >>>>>>>>>>>>>> 19200; >>>>>>>>>>>>>> timeout 4.00 >>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>> Feb 26 16:31:36 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>> weewx.drivers.vantage: Retry #0 failed >>>>>>>>>>>>>> Feb 26 16:31:40 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>> weewx.drivers.vantage: Retry #1 failed >>>>>>>>>>>>>> Feb 26 16:31:44 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>> weewx.drivers.vantage: Retry #2 failed >>>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>> Feb 26 16:31:45 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] DEBUG >>>>>>>>>>>>>> weewx.drivers.vantage: Retry #3 failed >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR >>>>>>>>>>>>>> weewx.drivers.vantage: Unable to wake up console >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] ERROR weewx.engine: >>>>>>>>>>>>>> Import of driver failed: Unable to wake up Vantage console >>>>>>>>>>>>>> (<class >>>>>>>>>>>>>> 'weewx.WakeupError'>) >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** Traceback (most recent call last): >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>> "/usr/share/weewx/weewx/engine.py", line >>>>>>>>>>>>>> 119, in setupStation >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** self.console = >>>>>>>>>>>>>> loader_function(config_dict, >>>>>>>>>>>>>> self) >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>> line 39, in loader >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** return VantageService(engine, >>>>>>>>>>>>>> config_dict) >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>> line 1898, in __init__ >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** Vantage.__init__(self, >>>>>>>>>>>>>> **config_dict[DRIVER_NAME]) >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>> line 515, in __init__ >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** self._setup() >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>> line 1317, in _setup >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** >>>>>>>>>>>>>> self.port.wakeup_console(max_tries=self.max_tries) >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** File >>>>>>>>>>>>>> "/usr/share/weewx/weewx/drivers/vantage.py", >>>>>>>>>>>>>> line 118, in wakeup_console >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** raise weewx.WakeupError("Unable to >>>>>>>>>>>>>> wake up >>>>>>>>>>>>>> Vantage console") >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL >>>>>>>>>>>>>> weewx.engine: **** WakeupError: Unable to wake up Vantage >>>>>>>>>>>>>> console >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>>> Unable to load driver: Unable to wake up Vantage console >>>>>>>>>>>>>> Feb 26 16:31:48 WeatherPi weewx[17971] CRITICAL __main__: >>>>>>>>>>>>>> **** Exiting... >>>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>> Feb 26 16:31:50 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>> Feb 26 16:31:58 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>> Feb 26 16:32:07 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: Router >>>>>>>>>>>>>> Advertisement from fe80::724f:57ff:feb7:82a1 >>>>>>>>>>>>>> Feb 26 16:32:15 WeatherPi dhcpcd[372]: wlan0: soliciting a >>>>>>>>>>>>>> DHCPv6 lease >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Friday, 26 February 2021 at 11:19:41 UTC+13 vince wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> So go ahead and restart it now. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thursday, February 25, 2021 at 1:02:41 PM UTC-8 monmul >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo killall screen >>>>>>>>>>>>>>>> screen: no process found >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ ps -ef | grep -e weewxd -e screen >>>>>>>>>>>>>>>> pi 3809 11222 0 10:01 pts/1 00:00:00 grep >>>>>>>>>>>>>>>> --color=auto -e weewxd -e screen >>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 21:57:53 UTC+13 >>>>>>>>>>>>>>>> [email protected] wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> vnc makes no relevant difference. >>>>>>>>>>>>>>>>> command = ‘screen’ below shows program ‘screen’ has a ‘pi’ >>>>>>>>>>>>>>>>> user process open on /dev/ttyUSB0 at the moment. not weewxd. >>>>>>>>>>>>>>>>> probably left >>>>>>>>>>>>>>>>> over from earlier troubleshooting. >>>>>>>>>>>>>>>>> kill it with “sudo killall screen”. >>>>>>>>>>>>>>>>> check if any weewxd’s or screen’s hanging around with “ps >>>>>>>>>>>>>>>>> -ef | grep -e weewxd -e screen”. kill them if you find any. >>>>>>>>>>>>>>>>> you should now be back to a clean state with /devttyUSB0 >>>>>>>>>>>>>>>>> ready for opening. do “sudo lsof /dev/ttyUSB0” to be sure >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On 25 Feb 2021, at 5:24 pm, gjr80 <[email protected]> >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I don't know, I'm a SSH only person, I am getting out of >>>>>>>>>>>>>>>>> my depth now. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 16:21:11 UTC+10 monmul >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I am using VNC Viewer (and always have) rather than >>>>>>>>>>>>>>>>>> SSH....not sure if that makes any difference? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 19:13:29 UTC+13 gjr80 >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hmm, different to my Davis on my RPi which shows weewxd >>>>>>>>>>>>>>>>>>> rather than screen. I will have to defer to Tom or someone >>>>>>>>>>>>>>>>>>> who knows about >>>>>>>>>>>>>>>>>>> screen. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Gary >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Thursday, 25 February 2021 at 15:58:07 UTC+10 monmul >>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo /etc/init.d/weewx stop >>>>>>>>>>>>>>>>>>>> [ ok ] Stopping weewx (via systemctl): weewx.service. >>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ sudo lsof /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>> lsof: WARNING: can't stat() fuse.gvfsd-fuse file system >>>>>>>>>>>>>>>>>>>> /run/user/1000/gvfs >>>>>>>>>>>>>>>>>>>> Output information may be incomplete. >>>>>>>>>>>>>>>>>>>> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE >>>>>>>>>>>>>>>>>>>> NAME >>>>>>>>>>>>>>>>>>>> screen 16582 pi 6u CHR 188,0 0t0 20196 >>>>>>>>>>>>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>>>>>>>>>>>> pi@WeatherPi:~ $ >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>>> >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/73f28622-be3d-4e50-b6fa-644811a22b2bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> >>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/2c9f4cbf-dfb1-479e-ba2a-8220395d01can%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> >>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/6782a2fa-7d0a-40ab-ac17-f3ed2890d018n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/e95e4c56-9997-4106-b8b9-4256b3b64219n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/65d07904-ffac-4481-b934-c0574bb09c24n%40googlegroups.com.
