Re: [weewx-user] Re: Apache is not showing /weewx on Ubuntu 16.04.1

On Wednesday, July 27, 2016 at 4:47:09 PM UTC-4, Tom Keffer wrote: > > I am not an apache expert either, but from what I can tell, the problem is > that the weewx Debian installs sets HTML_ROOT incorrectly. It's being set > to /var/www, when it should be /var/www/html. > blame it on more

[weewx-user] Re: Only updating twice an hour? plus linux question

On Friday, July 29, 2016 at 10:26:31 AM UTC-4, Kevin Tarr wrote: > > > https://www.wunderground.com/personal-weather-station/dashboard?ID=KPAENOLA5#history > > Is this really only being updated at 31 and 51 minutes on the hour? > apparently yes, based on the timestamps in the table. what is the

[weewx-user] Re: Only updating twice an hour? plus linux question

On Saturday, July 30, 2016 at 11:25:50 AM UTC-4, Kevin Tarr wrote: > > The archive interval was 300 and it was hardware. I was running weewx for > more than a year, then had to box everything up when we moved. I think the > problem is the weather station reset with having the batteries out for a

[weewx-user] Re: Nothing in /var/www/, looking for weewx folder

On Saturday, July 30, 2016 at 12:52:25 PM UTC-4, Vlad Rafeev wrote: > > what does the log tell you? >> >> what is the station's archive interval (look at the output from >> 'wee_device --current')? >> > > $ sudo wee_device --current > [sudo] password for meteo: > Using configuration file

[weewx-user] Re: Only updating twice an hour? plus linux question

On Sunday, July 31, 2016 at 12:17:13 PM UTC-4, Kevin Tarr wrote: > > > I've changed the intervals to five minutes > sudo wee_config_device --set-interval=5 > now I get this error: > Jul 31 12:01:17 weewx[26813]: fousb: unstable read: blocks differ for ptr > 0x009ea0 > the fine offset driver

Re: [weewx-user] Re: weewx will not start

On Wednesday, August 10, 2016 at 9:49:32 AM UTC-4, Joep L. Blom wrote: > > > Matthew, > I had other business to attend to but I have now had time to test further. > The error I showed in my latest mail is definitively a problem in de > driver. I have used te923py version rc0.18r1 and that

[weewx-user] Re: Possible problem with new Ultimeter driver

On Sunday, August 14, 2016 at 12:04:01 PM UTC-4, flynndacat: > > Hello: After I upgraded to V3.5, I noticed the time on my weather console > was off by several seconds. I know that the old Ultimeter driver I had used > (11RC3) corrected any drift, so I waited a few days to see if the time >

[weewx-user] Re: Cannot Get WeeWx to "see" my Vantage Vue

On Sunday, August 14, 2016 at 2:33:15 PM UTC-4, Jim J wrote: > > Thank you for your reply. > > The console is physically connected to the Synology with a USB cable > (using one of the USB ports available on the back of the Synology device). > > I saw in the examples that a typical USB device is

Re: [weewx-user] Weewx on Pib

On Saturday, August 13, 2016 at 6:03:36 PM UTC-4, Cliff Wylie wrote: > > I have been using Dave Webb's Weewx IMG file which works very well, I can > change the station location, the long and lat and the type of weather > station. > This all works OK in degrees F but here in Aus we are

[weewx-user] Re: MQTT weather data as input to weewx

On Saturday, August 6, 2016 at 4:03:30 AM UTC-4, Siegfried H. wrote: > > My goal is to have my existing weather data (mostly from sensors connected > to an esp8266), which are published to my mosquitto server and then send to > my home automation system (openHAB) *as input to weewx* from where

[weewx-user] Re: Unable to load driver: 'int' object has no attribute 'find'

On Tuesday, August 9, 2016 at 3:01:42 AM UTC-4, Łukasz Nowak wrote: > > Hi! > > I reinstalled my ubuntu and install newest weewx version but cannot run > it, it returns me an error: > > My config file is very standard fo TE923, didn't change anything. > > Can I ask you for help about this

Re: [weewx-user] Re: weewx will not start

On Sunday, August 7, 2016 at 6:16:55 PM UTC-4, Joep L. Blom wrote: > > > replying to myself: > This the result : > root@kangoo:/home/weewx/bin# ./wee_device > Using configuration file /home/weewx/weewx.conf > Using TE923 driver version 0.18rc5 (weewx.drivers.te923) > Traceback (most recent

[weewx-user] Re: rapidfire work on usb conected acurite display and 5-1 sensor?

On Tuesday, August 16, 2016 at 2:49:18 PM UTC-4, Jimmy r wrote: > > I have rapid fire turned on in the config file but when i look at > wunderground there is data missing. Is rapidfire with this setup working? > with rapidfire turned off it seems to be working. > >

[weewx-user] Re: Weewx Upgrade

On Friday, February 3, 2017 at 2:25:17 PM UTC-5, Phil Green wrote: > > Hello > I have been using Weewx for many years on my Raspberry Pi. > I usually install using the setup.py method. However on my new Raspberry > Pi3 I used the apt-get method. > My question:- when a new version of Weewx is

Re: [weewx-user] Interceptor Driver - running directly to configure fails

On Tuesday, January 31, 2017 at 10:11:42 PM UTC-5, Greg Tomsic wrote: > > Sorry, since I have your ear, what is the minimum command line syntax for > your driver to hear the WS-1400-IP/WH2600--for weewx purposes? To what is > it listening, if that makes sense? > >> >> the simplest approach is

Re: [weewx-user] Interceptor Driver - running directly to configure fails

On Tuesday, January 31, 2017 at 9:27:41 PM UTC-5, Greg Tomsic wrote: > > Hi back. Makes sense, but I am not an adept Python person. It is a .deb > install (in Linux MINT 17.2) and the command I used (after simply and maybe > stupidly finding one location of interceptor.py) is: > >

[weewx-user] Re: Costco 1536 datalogger full

On Wednesday, February 8, 2017 at 10:10:16 PM UTC-5, BrutalGoerge wrote: > > Is there a proper way to clear the datalogger memory? Is this even a > problem I should address? The message pops up on the station screen. > the state of the datalogger does not affect weewx's ability to read current

Re: [weewx-user] Re: No data from station

On Sunday, February 5, 2017 at 7:34:02 AM UTC-5, Alberto Sánchez wrote: > > Hi mwall, > > I am testing your new WMR300 drivers. 0,18rc2. It collects me data > correctly but reports me this error: > > Feb 05 13:29:16 raspberrypi weewx[1369]: wmr300: e.errno=None > e.strer

[weewx-user] Re: SDR/RTL Process stops when using MySQL Database

On Sunday, February 5, 2017 at 2:47:32 AM UTC-5, Clay Jackson wrote: > > Just getting started with weewx and an Acurite station that does not > support USB - so, I'm using SDR/RTL. > > If I set up to use a MySQL (Maria, actually) database on a different > server, when I start weewx, the RTL

Re: [weewx-user] Re: No data from station

the 0.18rc3 driver *should* handle the 'no data available' and 'no error' conditions properly for english, italian, german, french, and spanish locales. it does not yet handle timeouts properly. ideally it would recognize and ignore timeouts on the initial communication, then recognize and

[weewx-user] Re: Weatherbug on V3.6.2

On Sunday, February 5, 2017 at 11:44:05 AM UTC-5, Francisco Puig wrote: > > I'm trying to add to weewx V3.6.2 the weatherbug support, I added; > > [[WeatherBug]] > publisher_id = pX > station_number = Y > password = YOUR_WBUG_PASSWORD > > to the weewx.conf but I

[weewx-user] Re: forecast 3.2.4 showing N/A for temp and dewpt

On Sunday, February 5, 2017 at 11:10:03 AM UTC-5, Radar wrote: > > showing N/A for temp and dewpt > > snip of the log > the parser was not handling cases where temperature (or dewpoint) were double-digit negative numbers leading the 6-hour forecast block. fixed at forecast v3.2.12 m -- You

[weewx-user] Re: Missing index.html

On Friday, February 3, 2017 at 9:21:14 AM UTC-5, Jiří Sachl wrote: > > After installation (3x apt-get purge, 3x apt-get install) still missing > index.html in / var / www / html / weewx /. Help someone to repair it? > the conf file you posted does not contain cmon_mysql. are you certain that

[weewx-user] Re: Realtime.txt, realtime.xml and sunbird.txt

On Monday, January 23, 2017 at 12:04:40 AM UTC-5, Janez Kranjski wrote: > > Sorry - but now I don't understand your lines bellow. Until now, I use the > convention mentioned on https://github.com/weewx/weewx/wiki/crt (2. > Modify weeex.conf). > Your specification mentioned bellow is somewhat

Re: [weewx-user] Re: engine: Unable to load driver: (5, 'Input/output error')

On Saturday, January 21, 2017 at 06:59:54 AM UTC-5, Kevin Bosworth wrote: > > Here is what I got. > > Traceback (most recent call last): > File "weewx/drivers/ws23xx.py", line 2117, in > with WS23xx(port) as s: > File "weewx/drivers/ws23xx.py", line 648, in __init__ > self.serial_port

[weewx-user] Re: Realtime.txt, realtime.xml and sunbird.txt

m it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. # $Id: crt.py 1662 2017-01-22 15:01:26Z mwall $ # Copyright 2013-2017 Matthew Wall # Distributed under terms of the GPLv3 # thanks to gary roderick for significant contributi

[weewx-user] Re: Realtime.txt, realtime.xml and sunbird.txt

On Monday, January 23, 2017 at 8:06:40 AM UTC-5, Janez Kranjski wrote: > > This time without error in log ... but still without XML file. > And yes, I almost forget - it looks like sunbird.txt works (my colleague > (author of Android Weather Station app) said so, I don't have any devices >

[weewx-user] Re: Realtime.txt, realtime.xml and sunbird.txt

ogle.com/d/optout. # $Id: crt.py 1663 2017-01-23 12:27:44Z mwall $ # Copyright 2013-2017 Matthew Wall # Distributed under terms of the GPLv3 # thanks to gary roderick for significant contributions to this code """Emit loop data to file in Cumulus realtime format. http://wiki.sand

[weewx-user] Re: Realtime.txt, realtime.xml and sunbird.txt

On Sunday, January 22, 2017 at 9:19:07 AM UTC-5, Janez Kranjski wrote: > > I tried ... but ... do I need a "sunbird.txt.tmpl"? > by default, only the realtime (in txt format) will be emitted. to get realtime.xml or sunbird, you must specify them. for example, if you want all three files:

[weewx-user] Re: ultimeter setup troubles

On Monday, January 23, 2017 at 4:56:56 PM UTC-5, Eelco F wrote: > > I'm afraid I don't understand your point completely. Are you saying that > the driver you posted keeps the time of the ultimeter up to date, and the > latest driver from Matthew doesn't? > eelco, if you look at ultimeter.py,

[weewx-user] Re: 3rd Party Database Access

louis, it sounds like you have 'direct deposit' to meteotemplate under control, but here is a different approach: a meteotemplate uploader: https://github.com/matthewwall/weewx-meteotemplate it is based on this discussion: http://www.wxforum.net/index.php?topic=31018.0 you'll have to check

[weewx-user] Re: traslate zambretti to spanish

On Thursday, January 26, 2017 at 11:31:50 AM UTC-5, Daniel Jerez wrote: > > > Hi, I wanted to know if it was possible to translate Zambretti's data with > a forecast extension into another language? > you should put the translation in your skin.conf like this: [Forecast] [[Labels]]

[weewx-user] Re: I have the high summary not indicating direction.

On Tuesday, January 24, 2017 at 12:06:07 PM UTC-5, Brent Phillips wrote: > > High Wind 12 mph from N/A at 10:51:03 AM > the acurite hardware does not report wind gust or wind gust direction. weewx 3.7 will address this by calculating windGust and windGustDir from windSpeed for hardware

[weewx-user] Re: A few newbie questions

On Sunday, January 29, 2017 at 4:20:42 PM UTC-5, Robert Lister wrote: > > The part I am not sure about is the file:///var/www/html/index.html page > only updates every 30 mins. When I ran Weather Display the updates were > every 10 seconds or so ftp'd up to the website plus a local display that

[weewx-user] Re: Adding SOC (state of charge) reading for my Particle Photon based weather station

On Wednesday, January 25, 2017 at 9:13:41 AM UTC-5, Robert Mantel wrote: > > What I would like to do it take the voltage and soc that I already dump > into the fileparse file that it reads from and label map it into weewx. My > confusion is do I need to write a whole new service for this, or

[weewx-user] Re: Adding SOC (state of charge) reading for my Particle Photon based weather station

On Wednesday, January 25, 2017 at 10:12:09 AM UTC-5, Robert Mantel wrote: > > So do I create a new service for this or just extend the schema and not > worry about creating a new service? > just extend the scema - you already have the observations -- You received this message because you are

[weewx-user] Re: Write a program to display the days data

On Wednesday, January 25, 2017 at 8:23:50 PM UTC-5, Barton Phillips wrote: > > Also the link in 'http://weewx.com/docs/customizing.htm' in section > 'Customizing templates' to 'www.cheetahtemplate.org' seems to be broken, > as do all the other links I found on google for 'Cheetah'. Seems to be

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

On Wednesday, January 25, 2017 at 8:24:21 PM UTC-5, Marc Aubry wrote: > > Some updates about my problem. > I have try all the options mentioned above > - UPS > -Powered USB Hub > - change the power supply of the RPI and the weather station > but the problem was not solved and the the weewx was

[weewx-user] Re: ultimeter setup troubles

On Tuesday, January 24, 2017 at 4:27:54 PM UTC-5, Messy Potamia wrote: > > Matt I decided to try 0.17rc1, as downloaded from the link you posted > above, here's what I got: > Jan 24 15:20:09 RPI3 systemd[1]: Started LSB: weewx weather system. > Jan 24 15:20:09 RPI3 weewx[7350]: ultimeter: driver

[weewx-user] Re: KlimaLogg Pro with sensors 30.3180.IT: batteryStatus

On Tuesday, February 21, 2017 at 1:56:55 AM UTC-5, Christian wrote: > > > The database contains temperature and humidity values for all sensors, > and rxCheckPercent. The batteryStatus values are all NULL. > > My questions: > 1.) Is it correct that the batteryStatus values are missing? Can maybe

[weewx-user] Re: KlimaLogg Pro with sensors 30.3180.IT: batteryStatus

christian, please install the latest driver v1.3.2 (commit) the missing battery status bug was introduced at 1.3.0, but should be fixed in 1.3.2 m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

On Tuesday, February 21, 2017 at 2:14:47 AM UTC-5, Torbjørn Aasen wrote: > > Sorry I nag so much on you. > But I am a little distressed over not get it to work. > > I ran your commands and this is what came in the log > ... > Feb 21 07:38:53 raspberrypi weewx[657]: engine: Starting up weewx

[weewx-user] Re: Beta of Version 3.7.0 is available

On Saturday, February 18, 2017 at 4:19:31 PM UTC-5, tempus wrote: > > I just installed the weewx 3.7.0 second beta DEB package over a > previously installed 3.6.2. Before installation I made a backup copy of > '/etc/weewx/weewx.conf' and then took the installation option to use the >

[weewx-user] Re: Beta of Version 3.7.0 is available

On Saturday, February 18, 2017 at 4:19:31 PM UTC-5, tempus wrote: > > None of my customizations were copied to the new 'weewx.conf' file, which > is what I had expected, except for data in the [Station] stanza, where > there is a mistake. I have a West Longitude location, so the correct >

[weewx-user] Re: weewx and the meteostick

On Saturday, February 18, 2017 at 4:13:06 PM UTC-5, geary wrote: > > Hello, just found this thread and looks like my answer lies here ;>) > > I have a Davis System running thru the MeteoStick into WeeWx in Ubuntu > 16.10 > Where do I find the driver ( seems to be my missing part ) and any >

[weewx-user] Re: PGR-800 with SDR driver

On Saturday, February 18, 2017 at 4:09:31 PM UTC-5, St. B. wrote: > > Hi, > > the PCR800 works "out of the bo"x with Weewx PGR is just a typo from me. > Sorry about this > > however when setting my measure with : > rain = rain_rate.0:*.OSPCR800Packet > > yields rain rate 10 or 100 time

Re: [weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

i found it helpful to configure the broker so that it publishes using websockets. then you can use a web browser to see what is happening. this is especially useful when you're trying to decode someone else's topic hierarchy, or to figure out why your own topics are not showing up where you

[weewx-user] Re: Beta of Version 3.7.0 is available

On Sunday, February 19, 2017 at 8:57:16 AM UTC-5, Luc Heijst wrote: > > In version 7.0b2 I got many warnings in my debug logging like: > Feb 19 10:48:51 pi21 mstk[1109]: engine: calibration for 'pressure' > ignored in loop: name 'pressure' is not defined > Feb 19 10:48:53 pi21 mstk[1109]: engine:

[weewx-user] Re: Beta of Version 3.7.0 is available

On Sunday, February 19, 2017 at 9:44:47 AM UTC-5, Luc Heijst wrote: > > These are the errors I got: > Feb 19 11:39:34 pi21 klim[1824]: KlimaLogg: MainThread: Handle record 33: > 2017-02-19 10:40:00 SRT (1487511600) > Feb 19 11:39:34 pi21 klim[1824]: engine: calibration for 'humidity5' > ignored

[weewx-user] Re: No data from station

On Saturday, February 18, 2017 at 8:20:21 AM UTC-5, Ruben Navarro Huedo wrote: > > Hello friends. > > This week i will install a new WMR-300. > I will use a raspberry pi 3 with last raspbian. > > What is last wmr300 driver? > > Which one must i use? > ruben, as of 18feb2017, the latest wmr300

[weewx-user] Re: extraTemp1 units wrong

On Monday, February 13, 2017 at 7:14:55 PM UTC-5, Clay Jackson wrote: > > Trying to use an Acurite Lightning Sensor in my greenhouse as extraTemp1. > > > > I changed all of .tmpl files from “Pond” to Grenhouse (did not change the > var names) and the graph/texts are showing up fine; BUT.,

[weewx-user] Re: PGR-800 with SDR driver

On Wednesday, January 18, 2017 at 2:14:09 PM UTC-5, St. B. wrote: > > Hello, > > My WMR88 base station has decided a while a go it did not care about > receiving sensor information, so recently discovered and switched to SDR > driver of weewx. > > What is the suggest mapping for a PGR-800 for

[weewx-user] Re: KlimaLogg Pro with sensors 30.3180.IT: batteryStatus

On Wednesday, February 22, 2017 at 2:41:53 PM UTC-5, Christian wrote: > > I just tried Version 1.3.2, but the behavior seems to be unchanged. > sorry, try that again with 1.3.3 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe

[weewx-user] Re: KlimaLogg Pro with sensors 30.3180.IT: batteryStatus

On Wednesday, February 22, 2017 at 3:19:30 PM UTC-5, Christian wrote: > > Is it correct that 0 means "OK" and 1 means "low"? > correct. i made another small change. previous to 1.3.4 the driver used unit group_volt for battery status. now it uses group_count. m -- You received this

Re: [weewx-user] Re: No data from station

On Wednesday, February 22, 2017 at 1:53:00 PM UTC-5, Ruben Navarro Huedo wrote: > > A lot of thank's > > My stations has been running 40 days and data has nos been transfered to > PC. > 40 days? which version of the wmr300 driver are you running? > Weewx has detected ok wmr300 but it is

Re: [weewx-user] Re: No data from station

On Thursday, February 23, 2017 at 10:47:22 AM UTC-5, Ruben Navarro Huedo wrote: > > Running now fine with last driver. > I has readed data from the datalogger from the wmr-300 installation. > This is OK, but if i disconnect it some time (for example 30 minutes) > after starting weewx it begins

[weewx-user] Re: WH3080 - read stored data

On Sunday, February 19, 2017 at 4:12:51 PM UTC-5, Günther Zinsberger wrote: > > > Feb 19 07:39:12 rasp3 weewx[19064]: fousb: unstable read: blocks differ > for ptr 0x00 > Feb 19 07:39:12 rasp3 weewx[19064]: fousb: unrecognised magic number > Feb 19 07:39:12 rasp3 weewx[19064]: fousb:

[weewx-user] Re: Beta of Version 3.7.0 is available

On Sunday, February 19, 2017 at 10:49:57 AM UTC-5, tempus wrote: > > > * weewx/latlon: 44.653749,124.048677 > here is the problem. apparently you entered a non-negative longitude when you first installed weewx. debconf remembered that value, so it is used again when a new weewx.conf is

[weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

On Saturday, February 18, 2017 at 2:50:35 PM UTC-5, Torbjørn Aasen wrote: > > I have loaded the latest Noobs and Weewx twice on my Raspberry PI 3. > When I follow the installation guide it all seems to go right for > themselves but this file can not I find afterwards. > I've never done this

[weewx-user] Re: Beta of Version 3.7.0 is available

the second beta of 3.7.0 is now available: http://weewx.com/downloads/development_versions/ including both source and deb packages m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from

[weewx-user] Re: Acurite 01525A1 Showing Spike in Rain Fall when not raining

On Tuesday, February 21, 2017 at 4:04:43 PM UTC-5, Tony Turner wrote: > > I thought about adding phpLiteAdmin to my PI so I can easily look at the > database and alter entries. It appears to work very much like phpmyadmin > that I use on some of my other servers. > any sqlite tool should work.

[weewx-user] Re: Acurite 01525A1 Showing Spike in Rain Fall when not raining

On Tuesday, February 21, 2017 at 4:04:43 PM UTC-5, Tony Turner wrote: > > Is there a sqlite command I can use to find out if it were one event or > not? I thought about adding phpLiteAdmin to my PI so I can easily look at > the database and alter entries. It appears to work very much like >

[weewx-user] Re: Acurite 01525A1 Showing Spike in Rain Fall when not raining

On Tuesday, February 21, 2017 at 2:44:12 PM UTC-5, Tony Turner wrote: > > > Also, any thought about why I would see a spike like that in the rain > readings would be great. BTW, I do not have extra debugging turned on for > the logs and otherwise they looked normal for that time period. > the

[weewx-user] Re: Acurite 01525A1 Showing Spike in Rain Fall when not raining

On Tuesday, February 21, 2017 at 6:04:18 PM UTC-5, Tony Turner wrote: > > Here is the output of the sql query: > sqlite> select dateTime,rain from archive where rain > 1; > 148761|19.56 > sqlite> > > So it appears there is just one entry in the database. So any help on the > commands to get

[weewx-user] Re: radar doesn't display correctly

On Wednesday, February 22, 2017 at 9:41:44 AM UTC-5, Jerry Simonowits wrote: > What is displayed on the web page is just the word “Radar” which links to > the loop. > > > What am I missing ? > the radar_img must be url to an image, not a web page. you probably want this: radar_img =

[weewx-user] Re: Improved BatteryStatus plot

On Wednesday, February 22, 2017 at 9:43:46 AM UTC-5, Jerry Simonowits wrote: > > Do you know if this data is available from the Accurate line of sensors ? > If so, where does this code go ? > acurite hardware reports only one battery status: http://weewx.com/docs/hardware.htm#acurite_notes use

[weewx-user] acurite lightning detector

>From: Clay Jackson >Subject: Acurite Lighning Sensor >Date: 13 February 2017 23:21:23 EST > > Hi, Matthew – new topic/question. I have one of the Acurite Lighting sensors and would like to > integrate it into the weewx SDR. It looks right now as if it’s not really

Re: [weewx-user] Can't download weewx-wh23xx.zip driver

thom, you do not have to unzip the zip file - just download it. then install it using wee_extension. for example, if you download the zip file as weewx-wh23xx-master.zip, then install like this: wee_extension --install weewx-wh23xx-master.zip m -- You received this message because you are

Re: [weewx-user] Re: No data from station

On Saturday, February 11, 2017 at 1:46:27 PM UTC-5, Miguel Iniesta wrote: > > Hello, > > I am testing the new versions and unfortunately they do not work for me. > No data from the station but also no error message it seems. > > Any help please? > miguel, the portion of the log that you posted

[weewx-user] Re: getting openweathermap station_id

the openweathermap web site is a bit confusing. it is oriented toward people who need to download data more than for people who want to upload data, the terms they use have changed over the years, and their step-by-step instructions are not accurate if taken literally. fwiw, i have been using

[weewx-user] Re: getting openweathermap station_id

On Sunday, February 12, 2017 at 6:06:51 AM UTC-5, Paolo Benvenuto wrote: > > Il giorno domenica 12 febbraio 2017 07:23:56 UTC+1, Andrew Milner ha > scritto: >> >> https://www.openweathermap.org/stations >> >> Step 2 >> >> It says: > > "Register your station in our system using the new API version

[weewx-user] Re: extraBattery Status for extra sensor

On Monday, February 13, 2017 at 3:41:27 PM UTC-5, Mic G77 wrote: > > I've done what you ask. This is what I get with my sensor n°2: >> >> >> you'll have to run it again, as i gave you incorrect instructions. the debug_raw should be debug_packets_raw: debug = 1 [WMR200] ...

[weewx-user] Re: extraBattery Status for extra sensor

On Sunday, February 12, 2017 at 12:25:23 PM UTC-5, Mic G77 wrote: > > I have a wmr200 station with extra sensor (it's 2 THGR sensor for > temperature and humidity). Also these 2 sensor send the battery status to > the wmr200, it is not reported in the database. > do you have wmr200 or wmrs200?

Re: [weewx-user] Re: getting openweathermap station_id

On Sunday, February 12, 2017 at 2:19:22 PM UTC-5, Paolo Benvenuto wrote: > > 2017-02-12 15:15 GMT+01:00 mwall: > >> the openweathermap web site is a bit confusing. it is oriented toward >> people who need to download data more than for people who want to upload >> da

[weewx-user] Re: Formatting forecast strips

On Sunday, February 12, 2017 at 11:54:51 AM UTC-5, Dan'l B wrote: > > Been experimenting with the forecast strips. > > 1) Seen here > and in > the attached screen capture, the summary below the strip would look better > formatted

Re: [weewx-user] Re: No data from station

On Sunday, February 12, 2017 at 12:26:27 PM UTC-5, Miguel Iniesta wrote: > > This is the new error message (twice per second): > > weewx.service - LSB: weewx weather system >Loaded: loaded (/etc/init.d/weewx) >Active: active (running) since dom 2017-02-12 18:17:30 CET; 3min 10s ago >

[weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

ogle.com/d/optout. # $Id: crt.py 1665 2017-01-29 00:41:10Z mwall $ # Copyright 2013-2017 Matthew Wall # Distributed under terms of the GPLv3 # thanks to gary roderick for significant contributions to this code """Emit loop data to file in Cumulus realtime format. http://wiki.sand

[weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

isit https://groups.google.com/d/optout. # $Id: crt.py 1665 2017-01-29 00:41:10Z mwall $ # Copyright 2013-2017 Matthew Wall # Distributed under terms of the GPLv3 # thanks to gary roderick for significant contributions to this code """Emit loop data to file in Cumulus

[weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

On Tuesday, February 14, 2017 at 3:13:05 AM UTC-5, tempus wrote: > > Thanks for letting me know about that. > > I have a Vantage Pro2 Plus interfaced to weewx 3.6.2 via a USB > data-logger. SteelSeries Weather Gauges 2.5.18 was already installed with > the following 'gauges.js' settings: > >

[weewx-user] Re: forecast extension NWS error

On Thursday, February 9, 2017 at 4:37:15 PM UTC-5, pgeenhuizen wrote: > > Here's a snippet from the log which hopefully is sufficient, if not let > me know what else you need. > what is your location identifier? -- You received this message because you are subscribed to the Google Groups

[weewx-user] Re: Repeat degree and wind labels in forecast multiple strips

On Friday, February 10, 2017 at 10:52:36 AM UTC-5, Dan'l B wrote: > > Is it me, or is it correct that the ° and wind speed labels repeat > (left/start side) in the strip forecasts? > the three temperature rows are maximum, expected value, and minimum. in the screenshot you posted you can see

[weewx-user] Re: Reference values for calibration

On Tuesday, February 14, 2017 at 5:35:33 PM UTC-5, Thom Rogers wrote: > > How do I look at the REC entries ? I can write the SQL if necessary, but > how do I connect to the database ? >> >> tom, you can view/manipulate the database with any tool that can view sqlite databases. a common

Re: [weewx-user] Re: No data from station

On Tuesday, February 14, 2017 at 8:08:15 PM UTC-5, Cameron D wrote: > > On Monday, 13 February 2017 03:26:27 UTC+10, Miguel Iniesta wrote: >> >> feb 12 18:20:39 raspberrypi weewx[4058]: wmr300: e.errno=None >> e.strerror=None e.message=could not detach kernel driver from interface 0: >> No data

[weewx-user] Re: First import: most values out of range...

On Tuesday, February 14, 2017 at 8:10:45 AM UTC-5, Max G wrote: > > Well... I have just installed jessie on a Pi1 model B. > Installed the weewx package (apt-get), and answered the config questions; > standard unit selection was metric; no other changes. > The weather station is FineOffset W3081

[weewx-user] Re: BATTERY STATUS WS2801

On Tuesday, February 14, 2017 at 8:21:29 AM UTC-5, Ruben Navarro Huedo wrote: > > Hello: > > Do you know if ... can i show battery status with la crosse ws 2801 ? > > If yes... what variable must i use? > the ws28xx hardware reports windBatteryStatus, rainBatteryStatus, outTempBatteryStatus,

[weewx-user] Re: extraBattery Status for extra sensor

On Sunday, February 12, 2017 at 4:10:22 PM UTC-5, Mic G77 wrote: > > I have a wmr200. > I have seen that the following information are available : > outTempBatteryStatus, windBatteryStatus, uvBatteryStatus, and > rainBatteryStatus > > What i would like to have is this information for de 2 extra

[weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

On Monday, February 13, 2017 at 11:49:48 AM UTC-5, tempus wrote: > > Has there been more progress on your new custom Service bound to the > NEW_LOOP_PACKET event? It would be great to have even a > partially-functioning beta-version as a stop-gap solution. > bob, you could install the crt

Re: [weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

On Monday, February 13, 2017 at 12:19:40 PM UTC-5, Tom Keffer wrote: > > someone should write an rsync and an ftp service that can be bound to >> NEW_LOOP_PACKET. it could use the same code used by the ftp/rsync reports, >> just wrapped in a StdService instead of report generator. >> > ​ > The

[weewx-user] Re: Live console and uploading to a Website

On Monday, February 13, 2017 at 1:06:30 PM UTC-5, Peter Dougherty wrote: > > I don't even know what questions to start asking about this. I don't run > servers here or know anything about them whatsoever (I'm a very, very > inexperienced user and that's a gross understatement). Is there a "for

Re: [weewx-user] acurite lightning detector

On Thursday, February 16, 2017 at 3:21:34 PM UTC-5, Clay Jackson wrote: > > Hi, Matt – so, here’s what I see in weewx.log > > > > Feb 16 12:18:41 Weather weewx[14361]: sdr: MainThread: > AcuriteLightningPacket: unrecognized data: '2017-02-16 20:18:41 Acurite > lightning 0x2B6F Ch A Msg Type

[weewx-user] Re: WMRS200 : wrong rainBatteryStatus values in database

On Thursday, February 16, 2017 at 3:12:11 AM UTC-5, wysiwyg wrote: > > Hello ! > > While checking out some improvement of my battery monitoring, I notice > some value of rainBatteryStatus higher then 1 ! > ... > isn't it a bit weird ? > does the wmrs200 base station provide any indication of

Re: [weewx-user] weewx[5570]: engine: Caught database OperationalError: (1054, "Unknown column 'usUnits' in 'field list'")

for those running macos sierra: the 'unified logging system' has replaced asl and syslog: https://developer.apple.com/library/content/releasenotes/MacOSX/WhatsNewInOSX/Articles/OSXv10.html this has some useful details for using the new 'log' command to read the new binary logs:

[weewx-user] Re: Acurite 01536 (Costco)

On Wednesday, January 18, 2017 at 7:24:16 PM UTC-5, David Morgan wrote: After getting it running, I found I can use Wireshark to look at the > serial interface (after enabling a kernel module), would have been nice to > know that earlier. > there are a few threads in this forum, as well as

[weewx-user] Re: Interfacing with piped text / json

On Wednesday, January 18, 2017 at 9:38:14 PM UTC-5, Marcus Akesson wrote: > > PS: Another way would be to bypass the hardware receiver and use rtl_433 > and weewx-sdr. But, while there should be support for the ELV protocol, it > does not work, nothing is decoded. > the ELV WS2000 is listed in

Re: [weewx-user] Re: engine: Unable to load driver: (5, 'Input/output error')

On Thursday, January 19, 2017 at 8:14:46 AM UTC-5, Kevin Bosworth wrote: > > What is fcntl/select? kevin, those are the functions that the ws23xx driver uses to communicate over the serial port. they are more direct than the pyserial library that many other drivers use. what kind of

Re: [weewx-user] Re: engine: Unable to load driver: (5, 'Input/output error')

On Thursday, January 19, 2017 at 9:23:10 AM UTC-5, Kevin Bosworth wrote: > > It is a old dell laptop. Latitude D600. Serial port and ttyS0 exists. Do I > need to install a different library? no need to install any libraries. now try running the driver directly. if you installed from deb

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

On Sunday, January 15, 2017 at 9:48:58 PM UTC-5, Marc Aubry wrote: > > Do i have to add the following "port = /dev/mydevice" in the weewx.conf > file? > >> >> no. you are using the wh23xx driver, which is for fine offset hardware including WH2310 and tycon TP2300 (among others). this hardware

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

On Monday, January 16, 2017 at 6:08:37 AM UTC-5, Marc Aubry wrote: > > Hi > The weewx has just stop reporting and i did a lsusb command and it look > the same then before it stop reporting. > so it is not a problem of usb port changing name or order. > please post the log, and please post the

Re: [weewx-user] weewx[5570]: engine: Caught database OperationalError: (1054, "Unknown column 'usUnits' in 'field list'")

On Monday, January 16, 2017 at 9:52:57 AM UTC-5, Dan'l B wrote: > > When I go to the actual system.log in /var/log and run > cat system.log | grep weewx > it shows only what I have posted here. > you probably need to adjust the log settings in macos so that it emits DEBUG and INFO log levels

[weewx-user] Re: weewx stop reporting (or crash?) few time per day ????

On Monday, January 16, 2017 at 10:26:20 PM UTC-5, Marc Aubry wrote: > > Hi andrew > are your referring to this forecast error? > > Jan 16 22:40:27 weatherstation weewx[645]: forecast: OWMThread: OWM: > forecast failure: global name 'periods' is not defined > Jan 16 22:40:27 weatherstation

  1   2   3   4   5   6   7   8   9   10   >