The problem with the connector only shows itself on 2ft antennas. If
you are looking at the mount from behind the antenna, mounting the
antenna on the right with a 2ft antenna will cause you to have to bend
the cable at 90 degrees right up against the mounting plate. Trango's
solution for this
General List
Subject: Re: [WISPA] Trango Apex Fiber port
The problem with the connector only shows itself on 2ft antennas. If
you are looking at the mount from behind the antenna, mounting the
antenna on the right with a 2ft antenna will cause you to have to bend
the cable at 90 degrees right up against
] On
Behalf Of Brad Belton
Sent: Wednesday, January 13, 2010 7:30 AM
To: can...@believewireless.net; 'WISPA General List'
Subject: Re: [WISPA] Trango Apex Fiber port
Correct, but flipping the antenna to the other side of the pole is NOT
always an option.
Best,
Brad
-Original Message-
From
Just put up our first Apex 11Ghz link. Wondering what everyone does to
seal up that port. The manual says you have to hook up the fiber /
power port to metal conduit. Do you run conduit all the way back to the
base? Do you just use a short piece? Do you put a compression fitting
on the
Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Randy Cosby
Sent: Tuesday, January 12, 2010 10:05 AM
To: WISPA General List
Subject: [WISPA] Trango Apex Fiber port
Just put up our first Apex 11Ghz link. Wondering what everyone does to
seal up that port
Belton
Sent: Tuesday, January 12, 2010 11:41 AM
To: 'WISPA General List'
Subject: Re: [WISPA] Trango Apex Fiber port
Fortunately all our Apex installations have had relatively short cable
runs,
so haven't used the fiber port yet. I agree the execution of this port
is
poor at best. I really don't
- Original Message -
From: Randy Cosby dco...@infowest.com
To: WISPA General List wireless@wispa.org
Sent: Tuesday, January 12, 2010 11:04 AM
Subject: [WISPA] Trango Apex Fiber port
Just put up our first Apex 11Ghz link. Wondering what everyone does to
seal up that port. The manual says
-
From: Brad Belton b...@belwave.com
To: 'WISPA General List' wireless@wispa.org
Sent: Tuesday, January 12, 2010 11:41 AM
Subject: Re: [WISPA] Trango Apex Fiber port
Fortunately all our Apex installations have had relatively short cable
runs,
so haven't used the fiber port yet. I agree
, January 12, 2010 11:27 AM
To: WISPA General List
Subject: Re: [WISPA] Trango Apex Fiber port
I agree the execution of this port is
poor at best.
Not at all the case. Compared to other brand radios, the Apex is one of the
few that actually has an easilly accessible Fiber port. Both for replacing
Subject: [WISPA] Trango Apex Fiber port
Just put up our first Apex 11Ghz link. Wondering what everyone does to
seal up that port. The manual says you have to hook up the fiber /
power port to metal conduit. Do you run conduit all the way back to the
base? Do you just use a short piece? Do
...@wispa.org] On
Behalf Of Tom DeReggi
Sent: Tuesday, January 12, 2010 11:27 AM
To: WISPA General List
Subject: Re: [WISPA] Trango Apex Fiber port
I agree the execution of this port is
poor at best.
Not at all the case. Compared to other brand radios, the Apex is one of
the
few that actually
: Tuesday, January 12, 2010 4:41 PM
To: WISPA General List
Subject: Re: [WISPA] Trango Apex Fiber port
Brad,
I do not mean to argue against your points just for the sake of it...snip
WISPA Wants You! Join today
12 matches
Mail list logo
