Of Scott Reed
Sent: Saturday, July 20, 2013 12:55 PM
To: WISPA General List
Subject: Re: [WISPA] [WISPA - Offlist] OSPF Tutorial/Guide
I have a network with about 800 devices running OSPF. If you need more
help, let me know.
I do consulting for several WISPs helping get from bridged to routed
- Offlist] OSPF Tutorial/Guide
I have a network with about 800 devices running OSPF. If you need
more help, let me know.
I do consulting for several WISPs helping get from bridged to routed,
setting up routers correctly, etc.
If is is easy, no charge. If is going to take some time/effort, I
On 07/20/2013 07:06 PM, can...@believewireless.net wrote:
Cost should be set based on the speed of the link. So, if you have a 1
Gbps link in your network, set the cost of routers on either side to 1.
If you have a 333 Mbps link, set the cost of the routers on either
side to 3. 100 Mbps
)
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Scott Reed
Sent: Monday, July 22, 2013 3:37 PM
To: WISPA General List
Subject: Re: [WISPA] [WISPA - Offlist] OSPF Tutorial/Guide
Not a vendor member.
NewWays Networking, LLC is a WISP member. I just do some
: 07/20/2013 7:59 PM (GMT-07:00)
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] [WISPA - Offlist] OSPF Tutorial/Guide
I know that is how Cisco figures default values, but it is not always the best.
I may have a 10M wire link and a 54M wireless link. The average data flow
Subject: Re: [WISPA] [WISPA - Offlist] OSPF Tutorial/Guide
I know that is how Cisco figures default values, but it is not always the
best. I may have a 10M wire link and a 54M wireless link. The average
data flow is 5M, so want the 10M wire to be the primary because it is more
reliable. I would
:00)
To: WISPA General List wireless@wispa.org
Subject: Re: [WISPA] [WISPA - Offlist] OSPF Tutorial/Guide
I know that is how Cisco figures default values, but it is not always
the best. I may have a 10M wire link and a 54M wireless link. The
average data flow is 5M, so want the 10M wire
I have a network with about 800 devices running OSPF. If you need more
help, let me know.
I do consulting for several WISPs helping get from bridged to routed,
setting up routers correctly, etc.
If is is easy, no charge. If is going to take some time/effort, I
charge $65.00/hour for the
Oops. that was supposed to go to Chris, not the list.
On 7/20/2013 1:55 PM, Scott Reed wrote:
I have a network with about 800 devices running OSPF. If you need
more help, let me know.
I do consulting for several WISPs helping get from bridged to routed,
setting up routers correctly, etc.
If
Scott,
Can you help remotely?
ALL... do we have a services board anywhere... kinda like a craigslist for
our group?
On Sat, Jul 20, 2013 at 12:55 PM, Scott Reed sr...@nwwnet.net wrote:
I have a network with about 800 devices running OSPF. If you need more
help, let me know.
I do
Cost should be set based on the speed of the link. So, if you have a 1
Gbps link in your network, set the cost of routers on either side to 1. If
you have a 333 Mbps link, set the cost of the routers on either side to 3.
100 Mbps link? Cost = 10. So, your 1 Gbps link speed is really 1000 Mbps
What if you have a 10,40 or 100gig?
Sent from my Motorola Startac...
On Jul 20, 2013, at 8:08 PM,
can...@believewireless.netmailto:can...@believewireless.net
p...@believewireless.netmailto:p...@believewireless.net wrote:
Cost should be set based on the speed of the link. So, if you have a 1
Obviously, change from 1000 to 1, 4, or 10 and then divide.
On Sat, Jul 20, 2013 at 8:13 PM, Gino Villarini g...@aeronetpr.com wrote:
What if you have a 10,40 or 100gig?
Sent from my Motorola Startac...
On Jul 20, 2013, at 8:08 PM, can...@believewireless.net
I know that is how Cisco figures default values, but it is not always
the best. I may have a 10M wire link and a 54M wireless link. The
average data flow is 5M, so want the 10M wire to be the primary because
it is more reliable. I would give it a lower cost than the faster
wireless link.
14 matches
Mail list logo