Re: [WISPA] Tower

2013-10-29 Thread Brian 
Craig

100 foot in guyed and 75 in freestanding. Complete kits are ok.

Thanks,
Brian

On 10/27/2013 7:31 PM, Craig House wrote:
> Brian.  What heights are you looking for?  I can get them for you and have 
> them shipped within a week generally.  Are you looking for complete kits with 
> base plate or bottom section and with top sections?  Complete kits include 
> turnbuckles, thimbles, cable, big grips, ground rods, tension brackets, 
> anchors etc.  Let me know what you need I can get you pricing.  Need to know 
> what your looking for in freestanding sizes as well.
>
> Craig
>
>
> - Original Message -
> From: "Brian" 
> To: "WISPA General List" 
> Sent: Sunday, October 27, 2013 7:26:09 PM
> Subject: [WISPA] Tower
>
> I'm looking for Rohn 45G or equivalent. I'm also looking for some
> inexpensive free standing towers aswell. I can remove some of the
> smaller towers myself.
>
> Thanks,
> Brian
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread timothy steele 
Hold reset down for 10 sec that will do a TFTP factory reset after all light 
start blinking reboot it "do at your own risk"

—
Sent from Mailbox for iPhone

On Tue, Oct 29, 2013 at 3:43 PM, ~NGL~  wrote:

> This is the third machine.
> NGL
>   From: Josh Luthman 
>   Sent: Tuesday, October 29, 2013 12:04 PM
>   To: WISPA General List 
>   Subject: Re: [WISPA] Setting up Nanostations
>   With new firmware and a reset config I think it has to be your machine.  
> Nothing should persist after those two actions. 
>   Have you tried a second computer?  How about a mobile phone?
>   Josh Luthman
>   Office: 937-552-2340
>   Direct: 937-552-2343
>   1100 Wayne St
>   Suite 1337
>   Troy, OH 45373
>   On Tue, Oct 29, 2013 at 2:48 PM, ~NGL~  wrote:
> I have downloaded the and installed the firmware and reset the config.
> No Help
> NGL
>   From: Steve Barnes 
>   Sent: Tuesday, October 29, 2013 11:37 AM
>   To: WISPA General List 
>   Subject: Re: [WISPA] Setting up Nanostations
>   Had this issue a few weeks ago.  Had to down flash the firmware then 
> upgrade to get it working.
>   Steve Barnes
>   General Manager
>   PCSWIN.com
>   Howard LLC.
>   From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
> Behalf Of ~NGL~
>   Sent: Tuesday, October 29, 2013 2:35 PM
>   To: WISPA General List
>   Subject: Re: [WISPA] Setting up Nanostations
>   No auto filling Yes Incognito Tab
>   This is  setup on a radio only basis No Network.
>   New Chrome installation.
>   NGL
> From: Josh Luthman 
> Sent: Tuesday, October 29, 2013 11:19 AM
> To: WISPA General List 
> Subject: Re: [WISPA] Setting up Nanostations
> It also kind of sounds like you might have two devices with the same 
> IP (hence the login requirement again).
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
> On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman 
>  wrote:
>   Is it auto filling?  Did you use an Incognito Tab?
>   Josh Luthman
>   Office: 937-552-2340
>   Direct: 937-552-2343
>   1100 Wayne St
>   Suite 1337
>   Troy, OH 45373
>   On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:
> Same results with Chrome.
> What now?
> NGL
>   From: Josh Luthman 
>   Sent: Tuesday, October 29, 2013 10:08 AM
>   To: WISPA General List 
>   Subject: Re: [WISPA] Setting up Nanostations
>   Try Chrome.  If it fixes it, that's your problem.  If it 
> doesn't, there are other things you can try.
>   Josh Luthman
>   Office: 937-552-2340
>   Direct: 937-552-2343
>   1100 Wayne St
>   Suite 1337
>   Troy, OH 45373
>   On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:
> I have been using IE on all makes of radios for several years 
> with no problem. If I have to I will.
> NGL
>   From: Mike Hammett 
>   Sent: Tuesday, October 29, 2013 9:55 AM
>   To: WISPA General List 
>   Subject: Re: [WISPA] Setting up Nanostations
>   On purpose?
>   -
>   Mike Hammett
>   Intelligent Computing Solutions
>   http://www.ics-il.com
> --
>   From: "~NGL~" 
>   To: "WISPA General List" 
>   Sent: Tuesday, October 29, 2013 11:56:51 AM
>   Subject: Re: [WISPA] Setting up Nanostations
>   IE 8
> From: Josh Luthman 
> Sent: Tuesday, October 29, 2013 9:54 AM
> To: WISPA General List 
> Subject: Re: [WISPA] Setting up Nanostations
> What browser are you using? 
> Try Chrome in Incognito mode, see if you can reproduce it 
> there.
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
> On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  
> wrote:
>   I have 2 Nanostations M2 that will not save a SSID 
> change. When I change it click on change, then apply and click on the Main 
> tab it goes to the login page. I login and the SSID is back to the default.
>   What is going on?
>   NGL
>If you can read this Thank A Teacher.
> And if it's in English Thank A Soldier!
>

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread ~NGL~ 
This is the third machine.
NGL
  From: Josh Luthman 
  Sent: Tuesday, October 29, 2013 12:04 PM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  With new firmware and a reset config I think it has to be your machine.  
Nothing should persist after those two actions. 


  Have you tried a second computer?  How about a mobile phone?



  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373



  On Tue, Oct 29, 2013 at 2:48 PM, ~NGL~  wrote:

I have downloaded the and installed the firmware and reset the config.
No Help
NGL
  From: Steve Barnes 
  Sent: Tuesday, October 29, 2013 11:37 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  Had this issue a few weeks ago.  Had to down flash the firmware then 
upgrade to get it working.



  Steve Barnes

  General Manager

  PCSWIN.com

  Howard LLC.



  From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
Behalf Of ~NGL~
  Sent: Tuesday, October 29, 2013 2:35 PM
  To: WISPA General List
  Subject: Re: [WISPA] Setting up Nanostations



  No auto filling Yes Incognito Tab

  This is  setup on a radio only basis No Network.



  New Chrome installation.

  NGL

From: Josh Luthman 

Sent: Tuesday, October 29, 2013 11:19 AM

To: WISPA General List 

Subject: Re: [WISPA] Setting up Nanostations



It also kind of sounds like you might have two devices with the same IP 
(hence the login requirement again).





Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman 
 wrote:

  Is it auto filling?  Did you use an Incognito Tab?





  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373



  On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:

Same results with Chrome.

What now?

NGL

  From: Josh Luthman 

  Sent: Tuesday, October 29, 2013 10:08 AM

  To: WISPA General List 

  Subject: Re: [WISPA] Setting up Nanostations



  Try Chrome.  If it fixes it, that's your problem.  If it doesn't, 
there are other things you can try.





  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373



  On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:

I have been using IE on all makes of radios for several years 
with no problem. If I have to I will.

NGL

  From: Mike Hammett 

  Sent: Tuesday, October 29, 2013 9:55 AM

  To: WISPA General List 

  Subject: Re: [WISPA] Setting up Nanostations



  On purpose?



  -
  Mike Hammett
  Intelligent Computing Solutions
  http://www.ics-il.com




--

  From: "~NGL~" 
  To: "WISPA General List" 
  Sent: Tuesday, October 29, 2013 11:56:51 AM
  Subject: Re: [WISPA] Setting up Nanostations

  IE 8

From: Josh Luthman 

Sent: Tuesday, October 29, 2013 9:54 AM

To: WISPA General List 

Subject: Re: [WISPA] Setting up Nanostations



What browser are you using? 



Try Chrome in Incognito mode, see if you can reproduce it 
there.





Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  
wrote:

  I have 2 Nanostations M2 that will not save a SSID 
change. When I change it click on change, then apply and click on the Main tab 
it goes to the login page. I login and the SSID is back to the default.

  What is going on?

  NGL


   If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
   


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless






__

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread ~NGL~ 
The latest, the same that was on it.
NGL
  From: timothy steele 
  Sent: Tuesday, October 29, 2013 12:05 PM
  To: WISPA General List 
  Cc: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  What firmware version are you using?
  —
  Sent from Mailbox for iPhone



  On Tue, Oct 29, 2013 at 2:49 PM, ~NGL~  wrote:


I have downloaded the and installed the firmware and reset the config.
No Help
NGL
  From: Steve Barnes 
  Sent: Tuesday, October 29, 2013 11:37 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  Had this issue a few weeks ago.  Had to down flash the firmware then 
upgrade to get it working. 







  Steve Barnes 



  General Manager 



  PCSWIN.com 



  Howard LLC. 







  From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
Behalf Of ~NGL~
  Sent: Tuesday, October 29, 2013 2:35 PM
  To: WISPA General List
  Subject: Re: [WISPA] Setting up Nanostations 






  No auto filling Yes Incognito Tab


  This is  setup on a radio only basis No Network.





  New Chrome installation.


  NGL


From: Josh Luthman 



Sent: Tuesday, October 29, 2013 11:19 AM 



To: WISPA General List 



Subject: Re: [WISPA] Setting up Nanostations 






It also kind of sounds like you might have two devices with the same IP 
(hence the login requirement again).







Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373





On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman 
 wrote:


  Is it auto filling?  Did you use an Incognito Tab?







  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373





  On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:


Same results with Chrome.


What now?


NGL


  From: Josh Luthman 



  Sent: Tuesday, October 29, 2013 10:08 AM 



  To: WISPA General List 



  Subject: Re: [WISPA] Setting up Nanostations 






  Try Chrome.  If it fixes it, that's your problem.  If it doesn't, 
there are other things you can try.







  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373





  On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:


I have been using IE on all makes of radios for several years 
with no problem. If I have to I will.


NGL


  From: Mike Hammett 



  Sent: Tuesday, October 29, 2013 9:55 AM 



  To: WISPA General List 



  Subject: Re: [WISPA] Setting up Nanostations 






  On purpose? 





  -
  Mike Hammett
  Intelligent Computing Solutions
  http://www.ics-il.com 








--

  From: "~NGL~" 
  To: "WISPA General List" 
  Sent: Tuesday, October 29, 2013 11:56:51 AM
  Subject: Re: [WISPA] Setting up Nanostations 



  IE 8 



From: Josh Luthman 



Sent: Tuesday, October 29, 2013 9:54 AM 



To: WISPA General List 



Subject: Re: [WISPA] Setting up Nanostations 







What browser are you using? 







Try Chrome in Incognito mode, see if you can reproduce it 
there. 









Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373 







On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  
wrote: 



  I have 2 Nanostations M2 that will not save a SSID 
change. When I change it click on change, then apply and click on the Main tab 
it goes to the login page. I login and the SSID is back to the default. 



  What is going on? 



  NGL 





   If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!

   


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless 










_

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread timothy steele 
What firmware version are you using?

—
Sent from Mailbox for iPhone

On Tue, Oct 29, 2013 at 2:49 PM, ~NGL~  wrote:

> I have downloaded the and installed the firmware and reset the config.
> No Help
> NGL
>   From: Steve Barnes 
>   Sent: Tuesday, October 29, 2013 11:37 AM
>   To: WISPA General List 
>   Subject: Re: [WISPA] Setting up Nanostations
>   Had this issue a few weeks ago.  Had to down flash the firmware then 
> upgrade to get it working.
>
>   Steve Barnes
>   General Manager
>   PCSWIN.com
>   Howard LLC.
>
>   From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
> Behalf Of ~NGL~
>   Sent: Tuesday, October 29, 2013 2:35 PM
>   To: WISPA General List
>   Subject: Re: [WISPA] Setting up Nanostations
>
>   No auto filling Yes Incognito Tab
>   This is  setup on a radio only basis No Network.
>
>   New Chrome installation.
>   NGL
> From: Josh Luthman 
> Sent: Tuesday, October 29, 2013 11:19 AM
> To: WISPA General List 
> Subject: Re: [WISPA] Setting up Nanostations
>  
> It also kind of sounds like you might have two devices with the same IP 
> (hence the login requirement again).
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>  
> On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman 
>  wrote:
>   Is it auto filling?  Did you use an Incognito Tab?
>   Josh Luthman
>   Office: 937-552-2340
>   Direct: 937-552-2343
>   1100 Wayne St
>   Suite 1337
>   Troy, OH 45373
>
>   On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:
> Same results with Chrome.
> What now?
> NGL
>   From: Josh Luthman 
>   Sent: Tuesday, October 29, 2013 10:08 AM
>   To: WISPA General List 
>   Subject: Re: [WISPA] Setting up Nanostations
>
>   Try Chrome.  If it fixes it, that's your problem.  If it doesn't, 
> there are other things you can try.
>   Josh Luthman
>   Office: 937-552-2340
>   Direct: 937-552-2343
>   1100 Wayne St
>   Suite 1337
>   Troy, OH 45373
>
>   On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:
> I have been using IE on all makes of radios for several years 
> with no problem. If I have to I will.
> NGL
>   From: Mike Hammett 
>   Sent: Tuesday, October 29, 2013 9:55 AM
>   To: WISPA General List 
>   Subject: Re: [WISPA] Setting up Nanostations
>
>   On purpose?
>   -
>   Mike Hammett
>   Intelligent Computing Solutions
>   http://www.ics-il.com
>
> --
>   From: "~NGL~" 
>   To: "WISPA General List" 
>   Sent: Tuesday, October 29, 2013 11:56:51 AM
>   Subject: Re: [WISPA] Setting up Nanostations
>   IE 8
> From: Josh Luthman 
> Sent: Tuesday, October 29, 2013 9:54 AM
> To: WISPA General List 
> Subject: Re: [WISPA] Setting up Nanostations
>  
> What browser are you using? 
>  
> Try Chrome in Incognito mode, see if you can reproduce it 
> there.
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>  
> On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:
>   I have 2 Nanostations M2 that will not save a SSID change. 
> When I change it click on change, then apply and click on the Main tab it 
> goes to the login page. I login and the SSID is back to the default.
>   What is going on?
>   NGL
>If you can read this Thank A Teacher.
> And if it's in English Thank A Soldier!
>
>   ___
>   Wireless mailing list
>   Wireless@wispa.org
>   http://lists.wispa.org/mailman/listinfo/wireless
>  
> 
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>   ___
>   Wireless mailing list
>   Wireless@wispa.org
>   http://lists.wispa.org/mailman/listinfo/wireless
>
> --
>

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Josh Luthman 
With new firmware and a reset config I think it has to be your machine.
 Nothing should persist after those two actions.

Have you tried a second computer?  How about a mobile phone?


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Oct 29, 2013 at 2:48 PM, ~NGL~  wrote:

> **
> I have downloaded the and installed the firmware and reset the config.
> No Help
> NGL
>
>  *From:* Steve Barnes 
> *Sent:* Tuesday, October 29, 2013 11:37 AM
> *To:* WISPA General List 
> *Subject:* Re: [WISPA] Setting up Nanostations
>
>  Had this issue a few weeks ago.  Had to down flash the firmware then
> upgrade to get it working.
>
> ** **
>
> *Steve Barnes*
>
> General Manager
>
> PCSWIN.com
>
> Howard LLC.
>
> ** **
>
> *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On
> Behalf Of *~NGL~
> *Sent:* Tuesday, October 29, 2013 2:35 PM
> *To:* WISPA General List
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> No auto filling Yes Incognito Tab
>
> This is  setup on a radio only basis No Network.
>
>  
>
> New Chrome installation.
>
> NGL
>
>  *From:* Josh Luthman  
>
> *Sent:* Tuesday, October 29, 2013 11:19 AM
>
> *To:* WISPA General List  
>
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> It also kind of sounds like you might have two devices with the same IP
> (hence the login requirement again).
>
>
> 
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> ** **
>
> On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman 
> wrote:
>
>  Is it auto filling?  Did you use an Incognito Tab?
>
>
> 
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> ** **
>
> On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:
>
>  Same results with Chrome.
>
> What now?
>
> NGL
>
>  *From:* Josh Luthman  
>
> *Sent:* Tuesday, October 29, 2013 10:08 AM
>
> *To:* WISPA General List  
>
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there
> are other things you can try.
>
>
> 
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> ** **
>
> On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:
>
>  I have been using IE on all makes of radios for several years with no
> problem. If I have to I will.
>
> NGL
>
>  *From:* Mike Hammett  
>
> *Sent:* Tuesday, October 29, 2013 9:55 AM
>
> *To:* WISPA General List  
>
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> On purpose?
>
>
>
> -
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> ** **
>  --
>
> *From: *"~NGL~" 
> *To: *"WISPA General List" 
> *Sent: *Tuesday, October 29, 2013 11:56:51 AM
> *Subject: *Re: [WISPA] Setting up Nanostations
>
> IE 8
>
>  *From:* Josh Luthman  
>
> *Sent:* Tuesday, October 29, 2013 9:54 AM
>
> *To:* WISPA General List  
>
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> What browser are you using? 
>
> ** **
>
> Try Chrome in Incognito mode, see if you can reproduce it there.
>
>
> 
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> ** **
>
> On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:
>
>  I have 2 Nanostations M2 that will not save a SSID change. When I change
> it click on change, then apply and click on the Main tab it goes to the
> login page. I login and the SSID is back to the default.
>
> What is going on?
>
> NGL
>
> 
>
> If you can read this Thank A Teacher.
> And if it's in English Thank A Soldier!
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
> ** **
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
> ** **
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
> ** **
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread ~NGL~ 
I have downloaded the and installed the firmware and reset the config.
No Help
NGL
  From: Steve Barnes 
  Sent: Tuesday, October 29, 2013 11:37 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  Had this issue a few weeks ago.  Had to down flash the firmware then upgrade 
to get it working.

   

  Steve Barnes

  General Manager

  PCSWIN.com

  Howard LLC.

   

  From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On 
Behalf Of ~NGL~
  Sent: Tuesday, October 29, 2013 2:35 PM
  To: WISPA General List
  Subject: Re: [WISPA] Setting up Nanostations

   

  No auto filling Yes Incognito Tab

  This is  setup on a radio only basis No Network.

   

  New Chrome installation.

  NGL

From: Josh Luthman 

Sent: Tuesday, October 29, 2013 11:19 AM

To: WISPA General List 

Subject: Re: [WISPA] Setting up Nanostations

 

It also kind of sounds like you might have two devices with the same IP 
(hence the login requirement again).





Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

 

On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman  
wrote:

  Is it auto filling?  Did you use an Incognito Tab?





  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373

   

  On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:

Same results with Chrome.

What now?

NGL

  From: Josh Luthman 

  Sent: Tuesday, October 29, 2013 10:08 AM

  To: WISPA General List 

  Subject: Re: [WISPA] Setting up Nanostations

   

  Try Chrome.  If it fixes it, that's your problem.  If it doesn't, 
there are other things you can try.





  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373

   

  On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:

I have been using IE on all makes of radios for several years with 
no problem. If I have to I will.

NGL

  From: Mike Hammett 

  Sent: Tuesday, October 29, 2013 9:55 AM

  To: WISPA General List 

  Subject: Re: [WISPA] Setting up Nanostations

   

  On purpose?



  -
  Mike Hammett
  Intelligent Computing Solutions
  http://www.ics-il.com

   


--

  From: "~NGL~" 
  To: "WISPA General List" 
  Sent: Tuesday, October 29, 2013 11:56:51 AM
  Subject: Re: [WISPA] Setting up Nanostations

  IE 8

From: Josh Luthman 

Sent: Tuesday, October 29, 2013 9:54 AM

To: WISPA General List 

Subject: Re: [WISPA] Setting up Nanostations

 

What browser are you using? 

 

Try Chrome in Incognito mode, see if you can reproduce it there.





Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

 

On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:

  I have 2 Nanostations M2 that will not save a SSID change. 
When I change it click on change, then apply and click on the Main tab it goes 
to the login page. I login and the SSID is back to the default.

  What is going on?

  NGL


   If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!
   


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless

 




___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless

   


--

  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Josh Luthman 
I'd try that, too.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Oct 29, 2013 at 2:37 PM, Steve Barnes  wrote:

>  Had this issue a few weeks ago.  Had to down flash the firmware then
> upgrade to get it working.
>
> ** **
>
> *Steve Barnes*
>
> General Manager
>
> PCSWIN.com
>
> Howard LLC.
>
> ** **
>
> *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On
> Behalf Of *~NGL~
> *Sent:* Tuesday, October 29, 2013 2:35 PM
>
> *To:* WISPA General List
> *Subject:* Re: [WISPA] Setting up Nanostations
>
>  ** **
>
> No auto filling Yes Incognito Tab
>
> This is  setup on a radio only basis No Network.
>
>  
>
> New Chrome installation.
>
> NGL
>
>  *From:* Josh Luthman  
>
> *Sent:* Tuesday, October 29, 2013 11:19 AM
>
> *To:* WISPA General List  
>
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> It also kind of sounds like you might have two devices with the same IP
> (hence the login requirement again).
>
>
> 
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> ** **
>
> On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman 
> wrote:
>
>  Is it auto filling?  Did you use an Incognito Tab?
>
>
> 
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> ** **
>
> On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:
>
>  Same results with Chrome.
>
> What now?
>
> NGL
>
>  *From:* Josh Luthman  
>
> *Sent:* Tuesday, October 29, 2013 10:08 AM
>
> *To:* WISPA General List  
>
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there
> are other things you can try.
>
>
> 
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> ** **
>
> On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:
>
>  I have been using IE on all makes of radios for several years with no
> problem. If I have to I will.
>
> NGL
>
>  *From:* Mike Hammett  
>
> *Sent:* Tuesday, October 29, 2013 9:55 AM
>
> *To:* WISPA General List  
>
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> On purpose?
>
>
>
> -
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> ** **
>  --
>
> *From: *"~NGL~" 
> *To: *"WISPA General List" 
> *Sent: *Tuesday, October 29, 2013 11:56:51 AM
> *Subject: *Re: [WISPA] Setting up Nanostations
>
> IE 8
>
>  *From:* Josh Luthman  
>
> *Sent:* Tuesday, October 29, 2013 9:54 AM
>
> *To:* WISPA General List  
>
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> ** **
>
> What browser are you using? 
>
> ** **
>
> Try Chrome in Incognito mode, see if you can reproduce it there.
>
>
> 
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> ** **
>
> On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:
>
>  I have 2 Nanostations M2 that will not save a SSID change. When I change
> it click on change, then apply and click on the Main tab it goes to the
> login page. I login and the SSID is back to the default.
>
> What is going on?
>
> NGL
>
> 
>
> If you can read this Thank A Teacher.
> And if it's in English Thank A Soldier!
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>  ** **
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
> ** **
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>  ** **
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>  ** **
>
>  ** **
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> _

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Steve Barnes 
Had this issue a few weeks ago.  Had to down flash the firmware then upgrade to 
get it working.

Steve Barnes
General Manager
PCSWIN.com
Howard LLC.

From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf 
Of ~NGL~
Sent: Tuesday, October 29, 2013 2:35 PM
To: WISPA General List
Subject: Re: [WISPA] Setting up Nanostations

No auto filling Yes Incognito Tab
This is  setup on a radio only basis No Network.

New Chrome installation.
NGL
From: Josh Luthman
Sent: Tuesday, October 29, 2013 11:19 AM
To: WISPA General List
Subject: Re: [WISPA] Setting up Nanostations

It also kind of sounds like you might have two devices with the same IP (hence 
the login requirement again).


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman 
mailto:j...@imaginenetworksllc.com>> wrote:
Is it auto filling?  Did you use an Incognito Tab?


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~ mailto:n...@ngl.net>> 
wrote:
Same results with Chrome.
What now?
NGL
From: Josh Luthman
Sent: Tuesday, October 29, 2013 10:08 AM
To: WISPA General List
Subject: Re: [WISPA] Setting up Nanostations

Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there are 
other things you can try.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~ mailto:n...@ngl.net>> 
wrote:
I have been using IE on all makes of radios for several years with no problem. 
If I have to I will.
NGL
From: Mike Hammett
Sent: Tuesday, October 29, 2013 9:55 AM
To: WISPA General List
Subject: Re: [WISPA] Setting up Nanostations

On purpose?


-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com


From: "~NGL~" mailto:n...@ngl.net>>
To: "WISPA General List" mailto:wireless@wispa.org>>
Sent: Tuesday, October 29, 2013 11:56:51 AM
Subject: Re: [WISPA] Setting up Nanostations
IE 8
From: Josh Luthman
Sent: Tuesday, October 29, 2013 9:54 AM
To: WISPA General List
Subject: Re: [WISPA] Setting up Nanostations

What browser are you using?

Try Chrome in Incognito mode, see if you can reproduce it there.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~ mailto:n...@ngl.net>> 
wrote:
I have 2 Nanostations M2 that will not save a SSID change. When I change it 
click on change, then apply and click on the Main tab it goes to the login 
page. I login and the SSID is back to the default.
What is going on?
NGL
[cid:image001.gif@01CED4B4.7972EDE0]

If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread ~NGL~ 
No auto filling Yes Incognito Tab
This is  setup on a radio only basis No Network.

New Chrome installation.
NGL
  From: Josh Luthman 
  Sent: Tuesday, October 29, 2013 11:19 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  It also kind of sounds like you might have two devices with the same IP 
(hence the login requirement again).



  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373



  On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman  
wrote:

Is it auto filling?  Did you use an Incognito Tab?



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:

  Same results with Chrome.
  What now?
  NGL
From: Josh Luthman 
Sent: Tuesday, October 29, 2013 10:08 AM
To: WISPA General List 
Subject: Re: [WISPA] Setting up Nanostations


Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there 
are other things you can try.



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:

  I have been using IE on all makes of radios for several years with no 
problem. If I have to I will.
  NGL
From: Mike Hammett 
Sent: Tuesday, October 29, 2013 9:55 AM
To: WISPA General List 
Subject: Re: [WISPA] Setting up Nanostations


On purpose?




-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com





From: "~NGL~" 
To: "WISPA General List" 
Sent: Tuesday, October 29, 2013 11:56:51 AM
Subject: Re: [WISPA] Setting up Nanostations


IE 8
  From: Josh Luthman 
  Sent: Tuesday, October 29, 2013 9:54 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  What browser are you using? 


  Try Chrome in Incognito mode, see if you can reproduce it there.



  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373



  On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:

I have 2 Nanostations M2 that will not save a SSID change. When 
I change it click on change, then apply and click on the Main tab it goes to 
the login page. I login and the SSID is back to the default.
What is going on?
NGL
 If you can read this Thank A Teacher.
  And if it's in English Thank A Soldier! 


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless






--


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless








___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless









___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless








--


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Zach Mann 
Clear cache ?

On Tuesday, October 29, 2013, Josh Luthman wrote:

> Is it auto filling?  Did you use an Incognito Tab?
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:
>
> **
> Same results with Chrome.
> What now?
> NGL
>
>  *From:* Josh Luthman
> *Sent:* Tuesday, October 29, 2013 10:08 AM
> *To:* WISPA General List
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there
> are other things you can try.
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:
>
> **
> I have been using IE on all makes of radios for several years with no
> problem. If I have to I will.
> NGL
>
>  *From:* Mike Hammett
> *Sent:* Tuesday, October 29, 2013 9:55 AM
>  *To:* WISPA General List
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> On purpose?
>
>
>
> -
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> --
> *From: *"~NGL~" 
> *To: *"WISPA General List" 
> *Sent: *Tuesday, October 29, 2013 11:56:51 AM
> *Subject: *Re: [WISPA] Setting up Nanostations
>
> IE 8
>
>  *From:* Josh Luthman
> *Sent:* Tuesday, October 29, 2013 9:54 AM
> *To:* WISPA General List
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> What browser are you using?
>
> Try Chrome in Incognito mode, see if you can reproduce it there.
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct:
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Josh Luthman 
It also kind of sounds like you might have two devices with the same IP
(hence the login requirement again).


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Oct 29, 2013 at 2:18 PM, Josh Luthman
wrote:

> Is it auto filling?  Did you use an Incognito Tab?
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:
>
>> **
>> Same results with Chrome.
>> What now?
>> NGL
>>
>>  *From:* Josh Luthman 
>> *Sent:* Tuesday, October 29, 2013 10:08 AM
>> *To:* WISPA General List 
>> *Subject:* Re: [WISPA] Setting up Nanostations
>>
>> Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there
>> are other things you can try.
>>
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:
>>
>>> **
>>> I have been using IE on all makes of radios for several years with no
>>> problem. If I have to I will.
>>> NGL
>>>
>>>  *From:* Mike Hammett 
>>> *Sent:* Tuesday, October 29, 2013 9:55 AM
>>>  *To:* WISPA General List 
>>> *Subject:* Re: [WISPA] Setting up Nanostations
>>>
>>> On purpose?
>>>
>>>
>>>
>>> -
>>> Mike Hammett
>>> Intelligent Computing Solutions
>>> http://www.ics-il.com
>>>
>>> --
>>> *From: *"~NGL~" 
>>> *To: *"WISPA General List" 
>>> *Sent: *Tuesday, October 29, 2013 11:56:51 AM
>>> *Subject: *Re: [WISPA] Setting up Nanostations
>>>
>>> IE 8
>>>
>>>  *From:* Josh Luthman 
>>> *Sent:* Tuesday, October 29, 2013 9:54 AM
>>> *To:* WISPA General List 
>>> *Subject:* Re: [WISPA] Setting up Nanostations
>>>
>>> What browser are you using?
>>>
>>> Try Chrome in Incognito mode, see if you can reproduce it there.
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>> On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:
>>>
 **
 I have 2 Nanostations M2 that will not save a SSID change. When I
 change it click on change, then apply and click on the Main tab it goes to
 the login page. I login and the SSID is back to the default.
 What is going on?
 NGL
   If you can read this Thank A Teacher.
 And if it's in English Thank A Soldier!

 ___
 Wireless mailing list
 Wireless@wispa.org
 http://lists.wispa.org/mailman/listinfo/wireless


>>>  --
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>  --
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>  --
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Josh Luthman 
Is it auto filling?  Did you use an Incognito Tab?


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Oct 29, 2013 at 2:15 PM, ~NGL~  wrote:

> **
> Same results with Chrome.
> What now?
> NGL
>
>  *From:* Josh Luthman 
> *Sent:* Tuesday, October 29, 2013 10:08 AM
> *To:* WISPA General List 
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there
> are other things you can try.
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:
>
>> **
>> I have been using IE on all makes of radios for several years with no
>> problem. If I have to I will.
>> NGL
>>
>>  *From:* Mike Hammett 
>> *Sent:* Tuesday, October 29, 2013 9:55 AM
>>  *To:* WISPA General List 
>> *Subject:* Re: [WISPA] Setting up Nanostations
>>
>> On purpose?
>>
>>
>>
>> -
>> Mike Hammett
>> Intelligent Computing Solutions
>> http://www.ics-il.com
>>
>> --
>> *From: *"~NGL~" 
>> *To: *"WISPA General List" 
>> *Sent: *Tuesday, October 29, 2013 11:56:51 AM
>> *Subject: *Re: [WISPA] Setting up Nanostations
>>
>> IE 8
>>
>>  *From:* Josh Luthman 
>> *Sent:* Tuesday, October 29, 2013 9:54 AM
>> *To:* WISPA General List 
>> *Subject:* Re: [WISPA] Setting up Nanostations
>>
>> What browser are you using?
>>
>> Try Chrome in Incognito mode, see if you can reproduce it there.
>>
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:
>>
>>> **
>>> I have 2 Nanostations M2 that will not save a SSID change. When I change
>>> it click on change, then apply and click on the Main tab it goes to the
>>> login page. I login and the SSID is back to the default.
>>> What is going on?
>>> NGL
>>>   If you can read this Thank A Teacher.
>>> And if it's in English Thank A Soldier!
>>>
>>> ___
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>  --
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>  --
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread ~NGL~ 
Same results with Chrome.
What now?
NGL
  From: Josh Luthman 
  Sent: Tuesday, October 29, 2013 10:08 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there are 
other things you can try.



  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373



  On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:

I have been using IE on all makes of radios for several years with no 
problem. If I have to I will.
NGL
  From: Mike Hammett 
  Sent: Tuesday, October 29, 2013 9:55 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  On purpose?




  -
  Mike Hammett
  Intelligent Computing Solutions
  http://www.ics-il.com



--

  From: "~NGL~" 
  To: "WISPA General List" 
  Sent: Tuesday, October 29, 2013 11:56:51 AM
  Subject: Re: [WISPA] Setting up Nanostations


  IE 8
From: Josh Luthman 
Sent: Tuesday, October 29, 2013 9:54 AM
To: WISPA General List 
Subject: Re: [WISPA] Setting up Nanostations


What browser are you using? 


Try Chrome in Incognito mode, see if you can reproduce it there.



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:

  I have 2 Nanostations M2 that will not save a SSID change. When I 
change it click on change, then apply and click on the Main tab it goes to the 
login page. I login and the SSID is back to the default.
  What is going on?
  NGL
   If you can read this Thank A Teacher.
And if it's in English Thank A Soldier! 


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless









___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless





--


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless



___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless






--


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Josh Luthman 
Try Chrome.  If it fixes it, that's your problem.  If it doesn't, there are
other things you can try.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Oct 29, 2013 at 1:03 PM, ~NGL~  wrote:

> **
> I have been using IE on all makes of radios for several years with no
> problem. If I have to I will.
> NGL
>
>  *From:* Mike Hammett 
> *Sent:* Tuesday, October 29, 2013 9:55 AM
> *To:* WISPA General List 
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> On purpose?
>
>
>
> -
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> --
> *From: *"~NGL~" 
> *To: *"WISPA General List" 
> *Sent: *Tuesday, October 29, 2013 11:56:51 AM
> *Subject: *Re: [WISPA] Setting up Nanostations
>
> IE 8
>
>  *From:* Josh Luthman 
> *Sent:* Tuesday, October 29, 2013 9:54 AM
> *To:* WISPA General List 
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> What browser are you using?
>
> Try Chrome in Incognito mode, see if you can reproduce it there.
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:
>
>> **
>> I have 2 Nanostations M2 that will not save a SSID change. When I change
>> it click on change, then apply and click on the Main tab it goes to the
>> login page. I login and the SSID is back to the default.
>> What is going on?
>> NGL
>>   If you can read this Thank A Teacher.
>> And if it's in English Thank A Soldier!
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread ~NGL~ 
I have been using IE on all makes of radios for several years with no problem. 
If I have to I will.
NGL
  From: Mike Hammett 
  Sent: Tuesday, October 29, 2013 9:55 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  On purpose?




  -
  Mike Hammett
  Intelligent Computing Solutions
  http://www.ics-il.com



--

  From: "~NGL~" 
  To: "WISPA General List" 
  Sent: Tuesday, October 29, 2013 11:56:51 AM
  Subject: Re: [WISPA] Setting up Nanostations


  IE 8
From: Josh Luthman 
Sent: Tuesday, October 29, 2013 9:54 AM
To: WISPA General List 
Subject: Re: [WISPA] Setting up Nanostations


What browser are you using? 


Try Chrome in Incognito mode, see if you can reproduce it there.



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:

  I have 2 Nanostations M2 that will not save a SSID change. When I change 
it click on change, then apply and click on the Main tab it goes to the login 
page. I login and the SSID is back to the default.
  What is going on?
  NGL
   If you can read this Thank A Teacher.
And if it's in English Thank A Soldier! 


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless









___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless





--


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Josh Luthman 
That's likely to be your problem.  I've never had a problem with the AirMax
GUI on Chrome or Firefox.

There was (is?) a dumb bug in legacy stuff with Chrome.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Oct 29, 2013 at 12:55 PM, Mike Hammett wrote:

> On purpose?
>
>
>
> -
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> --
> *From: *"~NGL~" 
> *To: *"WISPA General List" 
> *Sent: *Tuesday, October 29, 2013 11:56:51 AM
>
> *Subject: *Re: [WISPA] Setting up Nanostations
>
> IE 8
>
>  *From:* Josh Luthman 
> *Sent:* Tuesday, October 29, 2013 9:54 AM
> *To:* WISPA General List 
> *Subject:* Re: [WISPA] Setting up Nanostations
>
> What browser are you using?
>
> Try Chrome in Incognito mode, see if you can reproduce it there.
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:
>
>> **
>> I have 2 Nanostations M2 that will not save a SSID change. When I change
>> it click on change, then apply and click on the Main tab it goes to the
>> login page. I login and the SSID is back to the default.
>> What is going on?
>> NGL
>>   If you can read this Thank A Teacher.
>> And if it's in English Thank A Soldier!
>>
>> ___
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>>
>  --
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Mike Hammett 
On purpose?-Mike HammettIntelligent Computing Solutionshttp://www.ics-il.comFrom: "~NGL~" To: "WISPA General List" Sent: Tuesday, October 29, 2013 11:56:51 AMSubject: Re: [WISPA] Setting up Nanostations



IE 8

  
  From: Josh Luthman 
  Sent: Tuesday, October 29, 2013 9:54 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations
  
  What browser are you using? 
  
  Try Chrome in Incognito mode, see if you can reproduce it 
  there.
  
  Josh LuthmanOffice: 937-552-2340Direct: 937-552-23431100 
  Wayne StSuite 1337Troy, OH 45373
  On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:
  

I have 2 Nanostations M2 that will not save a SSID change. When I 
change it click on change, then apply and click on the Main tab it goes to 
the login page. I login and the SSID is back to the default.
What is going on?
NGL

  
  

If you can read this Thank A Teacher.And if 
  it's in English Thank A 
Soldier!___Wireless 
mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
  
  

  ___Wireless mailing 
  listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless___Wireless mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread ~NGL~ 
IE 8
  From: Josh Luthman 
  Sent: Tuesday, October 29, 2013 9:54 AM
  To: WISPA General List 
  Subject: Re: [WISPA] Setting up Nanostations


  What browser are you using? 


  Try Chrome in Incognito mode, see if you can reproduce it there.



  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373



  On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:

I have 2 Nanostations M2 that will not save a SSID change. When I change it 
click on change, then apply and click on the Main tab it goes to the login 
page. I login and the SSID is back to the default.
What is going on?
NGL
 If you can read this Thank A Teacher.
  And if it's in English Thank A Soldier! 


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless






--


  ___
  Wireless mailing list
  Wireless@wispa.org
  http://lists.wispa.org/mailman/listinfo/wireless
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Setting up Nanostations

2013-10-29 Thread Josh Luthman 
What browser are you using?

Try Chrome in Incognito mode, see if you can reproduce it there.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Oct 29, 2013 at 12:53 PM, ~NGL~  wrote:

> **
> I have 2 Nanostations M2 that will not save a SSID change. When I change
> it click on change, then apply and click on the Main tab it goes to the
> login page. I login and the SSID is back to the default.
> What is going on?
> NGL
>   If you can read this Thank A Teacher.
> And if it's in English Thank A Soldier!
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] Setting up Nanostations

2013-10-29 Thread ~NGL~ 
I have 2 Nanostations M2 that will not save a SSID change. When I change it 
click on change, then apply and click on the Main tab it goes to the login 
page. I login and the SSID is back to the default.
What is going on?
NGL
 If you can read this Thank A Teacher.
  And if it's in English Thank A Soldier! 
<>___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] WISP Industry Growth Rate

2013-10-29 Thread Jeff Broadwick 
Both measures actually. I think you need both for an accurate picture. 

 

 

Regards,

 

Jeff Broadwick

Bitlomat Sales Director

847-238-2481 Office

574-220-7826 Cell

www.bitlomat.com

https://www.facebook.com/Bitlomat

http://www.linkedin.com/company/bitlomat

 

From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Sean Heskett
Sent: Tuesday, October 29, 2013 11:41 AM
To: WISPA General List
Subject: Re: [WISPA] WISP Industry Growth Rate

 

Revenue or subscribers?

 

For us we have seen a drop in our % growth of subs since the economic
downturn.  I think we are around 20% this year (was 40-50%)

 

But thanks to Netflix we have seen a huge amount of growth in ARPU.  I think
our revenue is up 35-40% this year.

 

Kinda crazy but I don't mind making more money with less work haha.

 

Sean

On Tuesday, October 29, 2013, Jeff Broadwick wrote:

Hi All,

I'd appreciate your help.

We are trying to find a good number for the WISP industry annual growth
rate.  I've seen a number of 4%, but that was just for the really big
carriers.

Does anyone know of a source?


Regards,

Jeff


Jeff Broadwick
Bitlomat Sales Director
847-238-2481 Office
574-220-7826 Cell
www.bitlomat.com
https://www.facebook.com/Bitlomat
http://www.linkedin.com/company/bitlomat




___
Wireless mailing list
Wireless@wispa.org  
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Jerry Richardson (airCloud) 
The driving factor is # of units per floor, and distance to furthest port.
>From there you will be able to determine where your switches need to be. In
some cases we have had to split the building and put switches on every
other floor at both ends of the building because the horizontal run was too
long to get from the unit to the closet.

Typically the apartment will be wired internally to a terminal can in a
closet where your drop would be so it's only one drop per unit.




On Tue, Oct 29, 2013 at 8:13 AM, Mike Hammett wrote:

> I don't know if you'd be within the distance limitations.
>
> TP-Link switches are pretty cheap.
>
>
>
> -
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> --
> *From: *"Gino Villarini" 
> *To: *"WISPA General List" 
> *Sent: *Tuesday, October 29, 2013 9:20:44 AM
>
> *Subject: *Re: [WISPA] MDU wiring
>
>  Then I have to add a switch and ups on each floor… I was thinking of
> home running all to the top floor… no?
>
>
>
> Gino A. Villarini
>
> g...@aeronetpr.com
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
> *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On
> Behalf Of *Sam Tetherow
> *Sent:* Tuesday, October 29, 2013 10:13 AM
> *To:* WISPA General List
> *Subject:* Re: [WISPA] MDU wiring
>
>
>
> Switch on each floor, cat5e to each unit.  If you have the ability, wire
> each floor back to the telco room on the roof, otherwise you could
> 'daisy-chain' each floor to the one above it back to the roof.  Second
> option has a lot more points of failure though.
>
> On 10/29/2013 09:05 AM, Gino Villarini wrote:
>
> Given the following scenario:
>
>
>
> New MDU , 15 floors, telco room on top, telco closet on each floor with
> conduit to each Unit… what would be the cheapest way to wire this for Cat5
> Ethernet?
>
>
>
> Gino A. Villarini
>
> g...@aeronetpr.com
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
>
>
>
>  ___
>
> Wireless mailing list
>
> Wireless@wispa.org
>
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] WISP Industry Growth Rate

2013-10-29 Thread Greg Osborn 
Too broad of a question really.  Here in Indiana, there isn't much low
hanging fruit left to chase.   Beyond telcos, cellcos, and cable, there are
multiple wisps to compete against.

-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Jeff Broadwick
Sent: Tuesday, October 29, 2013 10:43 AM
To: 'WISPA General List'
Subject: [WISPA] WISP Industry Growth Rate

Hi All,

I'd appreciate your help.

We are trying to find a good number for the WISP industry annual growth
rate.  I've seen a number of 4%, but that was just for the really big
carriers.

Does anyone know of a source?


Regards,

Jeff


Jeff Broadwick
Bitlomat Sales Director
847-238-2481 Office
574-220-7826 Cell
www.bitlomat.com
https://www.facebook.com/Bitlomat
http://www.linkedin.com/company/bitlomat




___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] WISP Industry Growth Rate

2013-10-29 Thread Sean Heskett 
Revenue or subscribers?

For us we have seen a drop in our % growth of subs since the economic
downturn.  I think we are around 20% this year (was 40-50%)

But thanks to Netflix we have seen a huge amount of growth in ARPU.  I
think our revenue is up 35-40% this year.

Kinda crazy but I don't mind making more money with less work haha.

Sean

On Tuesday, October 29, 2013, Jeff Broadwick wrote:

> Hi All,
>
> I'd appreciate your help.
>
> We are trying to find a good number for the WISP industry annual growth
> rate.  I've seen a number of 4%, but that was just for the really big
> carriers.
>
> Does anyone know of a source?
>
>
> Regards,
>
> Jeff
>
>
> Jeff Broadwick
> Bitlomat Sales Director
> 847-238-2481 Office
> 574-220-7826 Cell
> www.bitlomat.com
> https://www.facebook.com/Bitlomat
> http://www.linkedin.com/company/bitlomat
>
>
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org 
> http://lists.wispa.org/mailman/listinfo/wireless
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Faisal Imtiaz 
Depending on how many units are on each floor... 
You might be able to save some $ if you install POE powered Switches on each of 
the floors, thus concentrating / reducing the number of UPS's required. 

You could do a Passive POE powered from a couple of of the Telco Closets (using 
Mikrotik for example) 
Or you can do 802.3af active powered  (SLM2008 ...) 

Regards 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

- Original Message -

> From: "Gino Villarini" 
> To: "WISPA General List" 
> Sent: Tuesday, October 29, 2013 10:20:44 AM
> Subject: Re: [WISPA] MDU wiring

> Then I have to add a switch and ups on each floor… I was thinking of home
> running all to the top floor… no?

> Gino A. Villarini

> g...@aeronetpr.com

> Aeronet Wireless Broadband Corp.

> 787.273.4143

> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Sam Tetherow
> Sent: Tuesday, October 29, 2013 10:13 AM
> To: WISPA General List
> Subject: Re: [WISPA] MDU wiring

> Switch on each floor, cat5e to each unit. If you have the ability, wire each
> floor back to the telco room on the roof, otherwise you could 'daisy-chain'
> each floor to the one above it back to the roof. Second option has a lot
> more points of failure though.

> On 10/29/2013 09:05 AM, Gino Villarini wrote:

> > Given the following scenario:
> 

> > New MDU , 15 floors, telco room on top, telco closet on each floor with
> > conduit to each Unit… what would be the cheapest way to wire this for Cat5
> > Ethernet?
> 

> > Gino A. Villarini
> 

> > g...@aeronetpr.com
> 

> > Aeronet Wireless Broadband Corp.
> 

> > 787.273.4143
> 

> > ___
> 
> > Wireless mailing list
> 
> > Wireless@wispa.org
> 
> > http://lists.wispa.org/mailman/listinfo/wireless
> 

> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Mike Hammett 
I don't know if you'd be within the distance limitations. 

TP-Link switches are pretty cheap. 




- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 

- Original Message -

From: "Gino Villarini"  
To: "WISPA General List"  
Sent: Tuesday, October 29, 2013 9:20:44 AM 
Subject: Re: [WISPA] MDU wiring 



Then I have to add a switch and ups on each floor… I was thinking of home 
running all to the top floor… no? 


Gino A. Villarini 
g...@aeronetpr.com 
Aeronet Wireless Broadband Corp. 
787.273.4143 


From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf 
Of Sam Tetherow 
Sent: Tuesday, October 29, 2013 10:13 AM 
To: WISPA General List 
Subject: Re: [WISPA] MDU wiring 


Switch on each floor, cat5e to each unit. If you have the ability, wire each 
floor back to the telco room on the roof, otherwise you could 'daisy-chain' 
each floor to the one above it back to the roof. Second option has a lot more 
points of failure though. 

On 10/29/2013 09:05 AM, Gino Villarini wrote: 


Given the following scenario: 

New MDU , 15 floors, telco room on top, telco closet on each floor with conduit 
to each Unit… what would be the cheapest way to wire this for Cat5 Ethernet? 

Gino A. Villarini 
g...@aeronetpr.com 
Aeronet Wireless Broadband Corp. 
787.273.4143 



___ Wireless mailing list 
Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless 



___ 
Wireless mailing list 
Wireless@wispa.org 
http://lists.wispa.org/mailman/listinfo/wireless 

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Chris Fabien 
Can you put switches every few floors, like every 3 or 5? Would cut down
the wiring distance and reduce to only needing 5 or 3 UPSes, racks, etc.


On Tue, Oct 29, 2013 at 10:20 AM, Gino Villarini  wrote:

>  Then I have to add a switch and ups on each floor… I was thinking of
> home running all to the top floor… no?
>
> ** **
>
> Gino A. Villarini
>
> g...@aeronetpr.com
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
> *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On
> Behalf Of *Sam Tetherow
> *Sent:* Tuesday, October 29, 2013 10:13 AM
> *To:* WISPA General List
> *Subject:* Re: [WISPA] MDU wiring
>
> ** **
>
> Switch on each floor, cat5e to each unit.  If you have the ability, wire
> each floor back to the telco room on the roof, otherwise you could
> 'daisy-chain' each floor to the one above it back to the roof.  Second
> option has a lot more points of failure though.
>
> On 10/29/2013 09:05 AM, Gino Villarini wrote:
>
> Given the following scenario:
>
>  
>
> New MDU , 15 floors, telco room on top, telco closet on each floor with
> conduit to each Unit… what would be the cheapest way to wire this for Cat5
> Ethernet?
>
>  
>
> Gino A. Villarini
>
> g...@aeronetpr.com
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
>
>
>
> 
>
> ___
>
> Wireless mailing list
>
> Wireless@wispa.org
>
> http://lists.wispa.org/mailman/listinfo/wireless
>
>  ** **
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Fred Goldstein 

On 10/29/2013 10:20 AM, Gino Villarini wrote:


Then I have to add a switch and ups on each floor... I was thinking of 
home running all to the top floor... no?




How big is each floor?  This may be a case where exact mapping of the 
route matters.


Cat5e at 100 Mbps is rated for 100 meters maximum between actives. In 
practice it often works farther but it's not good practice to risk it in 
this sort of installation.  It comes in 4-pair (drop), 25-pair, and 
100-pair cables.  The total length includes, then, any vertical risers 
(25 or 100 pairs), any horizontal pulls (probably 4-pair), and any 
connecting cords.


A 15-story building means the vertical distance alone, to the farthest 
closet, uses up about half the total budget.  Then add in the stuff on 
each floor.  If it's a small, tall building, like some cramped hotels 
I've stayed in in New York ;-) , then it still might work if it's all 
home run.


Otherwise, you probably need more than one switch.  You might put the 
hub switch in the main room and run 25-pair or 100-pair to panels on 
nearby floors, depending on the unit count, and then light tributary 
switches on more distant floors, each serving a few nearby floors.  I 
would not however daisy-chain anything.  Two levels of switch, hub and 
floor, tops.  And while managed switches cost more, they're probably 
worth it if you're going to have to maintain this, to reduce truck rolls.


*From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] 
*On Behalf Of *Sam Tetherow

*Sent:* Tuesday, October 29, 2013 10:13 AM
*To:* WISPA General List
*Subject:* Re: [WISPA] MDU wiring

Switch on each floor, cat5e to each unit.  If you have the ability, 
wire each floor back to the telco room on the roof, otherwise you 
could 'daisy-chain' each floor to the one above it back to the roof.  
Second option has a lot more points of failure though.


On 10/29/2013 09:05 AM, Gino Villarini wrote:

Given the following scenario:

New MDU , 15 floors, telco room on top, telco closet on each floor
with conduit to each Unit... what would be the cheapest way to
wire this for Cat5 Ethernet?

Gino A. Villarini

g...@aeronetpr.com 

Aeronet Wireless Broadband Corp.

787.273.4143




___

Wireless mailing list

Wireless@wispa.org  

http://lists.wispa.org/mailman/listinfo/wireless



___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless



--
 Fred R. Goldstein  k1io fred "at" interisle.net
 Interisle Consulting Group
 +1 617 795 2701

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] WISP Industry Growth Rate

2013-10-29 Thread Jeff Broadwick 
Hi All,

I'd appreciate your help.

We are trying to find a good number for the WISP industry annual growth
rate.  I've seen a number of 4%, but that was just for the really big
carriers.

Does anyone know of a source?


Regards,

Jeff


Jeff Broadwick
Bitlomat Sales Director
847-238-2481 Office
574-220-7826 Cell
www.bitlomat.com
https://www.facebook.com/Bitlomat
http://www.linkedin.com/company/bitlomat




___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Sam Tetherow 
Guess it depends on what you consider cheapest.  Homerun to the roof 
will add more labor, wiring complexity (and size) and you will probably 
run into distance issues on a 15 story MDU.


On 10/29/2013 09:20 AM, Gino Villarini wrote:


Then I have to add a switch and ups on each floor... I was thinking of 
home running all to the top floor... no?


Gino A. Villarini

g...@aeronetpr.com 

Aeronet Wireless Broadband Corp.

787.273.4143

*From:*wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] 
*On Behalf Of *Sam Tetherow

*Sent:* Tuesday, October 29, 2013 10:13 AM
*To:* WISPA General List
*Subject:* Re: [WISPA] MDU wiring

Switch on each floor, cat5e to each unit.  If you have the ability, 
wire each floor back to the telco room on the roof, otherwise you 
could 'daisy-chain' each floor to the one above it back to the roof.  
Second option has a lot more points of failure though.


On 10/29/2013 09:05 AM, Gino Villarini wrote:

Given the following scenario:

New MDU , 15 floors, telco room on top, telco closet on each floor
with conduit to each Unit... what would be the cheapest way to
wire this for Cat5 Ethernet?

Gino A. Villarini

g...@aeronetpr.com 

Aeronet Wireless Broadband Corp.

787.273.4143




___

Wireless mailing list

Wireless@wispa.org  

http://lists.wispa.org/mailman/listinfo/wireless



___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Josh Luthman 
That's what I would do.  Probably fiber between floor/top.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Oct 29, 2013 10:21 AM, "Gino Villarini"  wrote:

>  Then I have to add a switch and ups on each floor… I was thinking of
> home running all to the top floor… no?
>
> ** **
>
> Gino A. Villarini
>
> g...@aeronetpr.com
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
> *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On
> Behalf Of *Sam Tetherow
> *Sent:* Tuesday, October 29, 2013 10:13 AM
> *To:* WISPA General List
> *Subject:* Re: [WISPA] MDU wiring
>
> ** **
>
> Switch on each floor, cat5e to each unit.  If you have the ability, wire
> each floor back to the telco room on the roof, otherwise you could
> 'daisy-chain' each floor to the one above it back to the roof.  Second
> option has a lot more points of failure though.
>
> On 10/29/2013 09:05 AM, Gino Villarini wrote:
>
> Given the following scenario:
>
>  
>
> New MDU , 15 floors, telco room on top, telco closet on each floor with
> conduit to each Unit… what would be the cheapest way to wire this for Cat5
> Ethernet?
>
>  
>
> Gino A. Villarini
>
> g...@aeronetpr.com
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
>
>
>
> 
>
> ___
>
> Wireless mailing list
>
> Wireless@wispa.org
>
> http://lists.wispa.org/mailman/listinfo/wireless
>
>  ** **
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Gino Villarini 
Then I have to add a switch and ups on each floor... I was thinking of home 
running all to the top floor... no?

Gino A. Villarini
g...@aeronetpr.com
Aeronet Wireless Broadband Corp.
787.273.4143
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf 
Of Sam Tetherow
Sent: Tuesday, October 29, 2013 10:13 AM
To: WISPA General List
Subject: Re: [WISPA] MDU wiring

Switch on each floor, cat5e to each unit.  If you have the ability, wire each 
floor back to the telco room on the roof, otherwise you could 'daisy-chain' 
each floor to the one above it back to the roof.  Second option has a lot more 
points of failure though.

On 10/29/2013 09:05 AM, Gino Villarini wrote:
Given the following scenario:

New MDU , 15 floors, telco room on top, telco closet on each floor with conduit 
to each Unit... what would be the cheapest way to wire this for Cat5 Ethernet?

Gino A. Villarini
g...@aeronetpr.com
Aeronet Wireless Broadband Corp.
787.273.4143




___

Wireless mailing list

Wireless@wispa.org

http://lists.wispa.org/mailman/listinfo/wireless

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Josh Luthman 
And bottle necks.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Oct 29, 2013 10:13 AM, "Sam Tetherow"  wrote:

>  Switch on each floor, cat5e to each unit.  If you have the ability, wire
> each floor back to the telco room on the roof, otherwise you could
> 'daisy-chain' each floor to the one above it back to the roof.  Second
> option has a lot more points of failure though.
>
> On 10/29/2013 09:05 AM, Gino Villarini wrote:
>
>  Given the following scenario:
>
> ** **
>
> New MDU , 15 floors, telco room on top, telco closet on each floor with
> conduit to each Unit… what would be the cheapest way to wire this for Cat5
> Ethernet?
>
> ** **
>
> Gino A. Villarini
>
> g...@aeronetpr.com
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
>
> ___
> Wireless mailing 
> listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless
>
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] MDU wiring

2013-10-29 Thread Sam Tetherow 
Switch on each floor, cat5e to each unit.  If you have the ability, wire 
each floor back to the telco room on the roof, otherwise you could 
'daisy-chain' each floor to the one above it back to the roof.  Second 
option has a lot more points of failure though.


On 10/29/2013 09:05 AM, Gino Villarini wrote:


Given the following scenario:

New MDU , 15 floors, telco room on top, telco closet on each floor 
with conduit to each Unit... what would be the cheapest way to wire 
this for Cat5 Ethernet?


Gino A. Villarini

g...@aeronetpr.com 

Aeronet Wireless Broadband Corp.

787.273.4143



___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] MDU wiring

2013-10-29 Thread Gino Villarini 
Given the following scenario:

New MDU , 15 floors, telco room on top, telco closet on each floor with conduit 
to each Unit... what would be the cheapest way to wire this for Cat5 Ethernet?

Gino A. Villarini
g...@aeronetpr.com
Aeronet Wireless Broadband Corp.
787.273.4143
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless