To: WISPA General List
Subject: Re: [WISPA] Need small non-penetrating roof mount for single
Nanostation + 5ft mast
We try to stick to White Rock hens just to keep things standardized. No one
likes to have a back order on a fowl delay things.
Ben West b...@gowasabi.net wrote ..
If you need, here
, July 30, 2013 12:58 PM
To: WISPA General List
Subject: [WISPA] Need small non-penetrating roof mount for single
Nanostation + 5ft mast
Hello list,
I am setting up a PtP link between two gas stations for a client. I am going
to be using two Nanostation M5 units going about 1/2mi diagonally
Thanks for the close up. I think I will go with this design as I can get
all of those parts locally. I like the wide base, to distribute weight more
evenly.
On Tue, Jul 30, 2013 at 3:13 PM, Ben West b...@gowasabi.net wrote:
If you need, here is a close up of that 3foot tripod screwed down to
[mailto:wireless-boun...@wispa.org] *On
Behalf Of *Joshua Zukerman
*Sent:* Tuesday, July 30, 2013 12:58 PM
*To:* WISPA General List
*Subject:* [WISPA] Need small non-penetrating roof mount for single
Nanostation + 5ft mast
** **
Hello list,
I am setting up a PtP link between two gas stations
Hello list,
I am setting up a PtP link between two gas stations for a client. I am
going to be using two Nanostation M5 units going about 1/2mi diagonally
across a highway. I'd like to mount them to a 5ft mast then to a
non-penetrating roof mount, as the only place with clear line-of-sight is
on
We use wood pallets with cement blocks when needed. Wood pallets are free
for the asking most of the time from area businesses.
On Jul 30, 2013 12:58 PM, Joshua Zukerman haw...@gmail.com wrote:
Hello list,
I am setting up a PtP link between two gas stations for a client. I am
going to be
For ultra low-cost non-penetrating roof mounts, I've been playing around
with J-Bars salvaged from discarded Dish TV equipment, mounted to a base
made from scrap treated lumber and weighted down with cinderblocks. Then,
I mate a vertical length of EMT conduit, 1/2 or better yet 3/4, using a
Check with Nello www.nelloinc.com
On 7/30/2013 1:58 PM, Joshua Zukerman wrote:
Hello list,
I am setting up a PtP link between two gas stations for a client. I am
going to be using two Nanostation M5 units going about 1/2mi
diagonally across a highway. I'd like to mount them to a 5ft mast then
I like what you did here:
https://lh4.googleusercontent.com/-uSvf_bhcyXE/TMY6GYrz3HI/AIo/5ErZI4Y93D4/w560-h746-no/wasabinet_bolita_small.jpg
I sort of had that thought in my mind already, but couldn't envision how to
make a bottom piece to hold down the tripod. Now that I see a photo, I
If you need, here is a close up of that 3foot tripod screwed down to the
treated lumber base:
https://lh4.googleusercontent.com/-uy-dmEYKRic/TMY7XkHK6RI/AI4/tuJvBzKGcug/w909-h682-no/roof_tripod_base_small.jpg
I think those are 1/4 lag screws and washers. The hen is optional.
On Tue, Jul
30, 2013 12:58:23 PM
Subject: [WISPA] Need small non-penetrating roof mount for single Nanostation +
5ft mast
Hello list,
I am setting up a PtP link between two gas stations for a client. I am going to
be using two Nanostation M5 units going about 1/2mi diagonally across a
highway. I'd
B VERY careful when using treated wood on a metal roof. It will attack
and eat right through it.
I caught my first do-it-yourself mount before it got through the roof of
a multi-million dollar house.
At a minimum use a roof pad. If you can't find one for cheap then ask
around your friends
Yep, sorry for not being diligent about mentioning (or photographing) the
roof mat. None of the rooftops I've mounted on are metal, but even still a
roof mat is a good idea to keep the wood from slowly rotting away the
tar-paper or whatever the roof is surfaced with.
Thanks for the tip about
Pretty sure the roof is rubber, but I haven't been on it yet. Roof mats are
definitely a good idea.
Years ago when I worked at a WISP, I think we used rubber truck mud flaps.
Cheap and can be purchased locally.
On Tue, Jul 30, 2013 at 4:16 PM, Ryan Spott rsp...@irongoat.net wrote:
B VERY
I have used horse mats from Tractor Supply... work very well and last.
On Tue, Jul 30, 2013 at 5:12 PM, Joshua Zukerman haw...@gmail.com wrote:
Pretty sure the roof is rubber, but I haven't been on it yet. Roof mats
are definitely a good idea.
Years ago when I worked at a WISP, I think we
I wonder if you could bolt a 5' stanchion to a mat, which the mat's weight
would hold such a small radio with no issue. Like a four bolt foot plate on
a pole...???
On Tue, Jul 30, 2013 at 5:20 PM, Clay Stewart
cstew...@stewartcomputerservices.com wrote:
I have used horse mats from Tractor
We try to stick to White Rock hens just to keep things standardized. No one
likes to have a back order on a fowl delay things.
Ben West b...@gowasabi.net wrote ..
If you need, here is a close up of that 3foot tripod screwed down to the
treated lumber base:
Harbor Freight foam puzzle mats work alright as well for pads. $6.99 for 4
on sale almost every week. I'm with Josh though. A pallet with some mats
under it works wonders. If you find a source for the plastic pallets they
work even better.
On Tue, Jul 30, 2013 at 5:41 PM, wi...@metrocom.ca
non-penetrating roof mount for single
Nanostation + 5ft mast
We use wood pallets with cement blocks when needed. Wood pallets are free
for the asking most of the time from area businesses.
On Jul 30, 2013 12:58 PM, Joshua Zukerman haw...@gmail.com wrote:
Hello list,
I am setting up a PtP link
on a flat roof.
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Joey Craig
Sent: Tuesday, July 30, 2013 2:04 PM
To: WISPA General List
Subject: Re: [WISPA] Need small non-penetrating roof mount for single
Nanostation + 5ft mast
We use wood pallets
.
--
*From:* wireless-boun...@wispa.org
[mailto:wireless-boun...@wispa.orgwireless-boun...@wispa.org]
*On Behalf Of *Joey Craig
*Sent:* Tuesday, July 30, 2013 2:04 PM
*To:* WISPA General List
*Subject:* Re: [WISPA] Need small non-penetrating roof mount for single
Nanostation + 5ft mast
We
...@wispa.orgwireless-boun...@wispa.org]
*On Behalf Of *Joey Craig
*Sent:* Tuesday, July 30, 2013 2:04 PM
*To:* WISPA General List
*Subject:* Re: [WISPA] Need small non-penetrating roof mount for single
Nanostation + 5ft mast
We use wood pallets with cement blocks when needed. Wood pallets are
free
, July 30, 2013 2:04 PM
*To:* WISPA General List
*Subject:* Re: [WISPA] Need small non-penetrating roof mount for single
Nanostation + 5ft mast
We use wood pallets with cement blocks when needed. Wood pallets are
free for the asking most of the time from area businesses.
On Jul 30, 2013 12:58
30, 2013 1:58 PM
To: WISPA General List wireless@wispa.org
Subject: [WISPA] Need small non-penetrating roof mount for single
Nanostation + 5ft mast
Hello list,
I am setting up a PtP link between two gas stations for a client. I am
going to be using two Nanostation M5 units going about 1/2mi
24 matches
Mail list logo
