FYI
Shipment came in and they fit in the RB 532 holes perfect AND the card
will fit under the board with mmcx pigtail and there is room (about 1/16
inch).
Looks good to me.
Brian
Brian Rohrbacher wrote:
https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbhardware
Th
-0700
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
> I've used these guys for grounding the shield of a cat5 cable:
>
>
http://www.oregonfast.net/gofast/Spruce/4460-D%20Shield%20connector-1.pdf
>
>
Eric Rogers wrote:
>
> I was just refer
ugust 27, 2006 5:07 PM
*To:* WISPA General List
*Subject:* RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I believe that solder is probably not a good idea here. Lightning can
build enough heat to melt the solder and thus break the connection. I
think all ground connections need
PROTECTED] On Behalf
Of Scott Reed
Sent: Sunday, August 27, 2006 5:07
PM
To: WISPA General List
Subject: RE: [WISPA] Self Adhesive
Mini PCB supports for Mikrotik
I believe that solder is probably not a good idea here. Lightning
can build enough heat to melt the solder and thus break the connection
06 2:56 PM
To: 'WISPA General List'
Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
What brand and part number cable and connectors do you use for the CAT5E
cable?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Eric Roger
ECTED]>
To: "WISPA General List"
Sent: Sun, 27 Aug 2006 14:36:16 -0400
Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
> I myself use them at our tower sites at the bottom AND the top. I
had a
>
tower get struck, directly and lost everything...i
f Of Jeromie Reeves
Sent: Sunday, August 27, 2006 12:00 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Do you find that a surge supressor at the CPE is better then at the
internal PC/Router/Switch? Or do
you use one at each end?
Jeromie
Harold Bledsoe wr
ves
Sent: Sunday, August 27, 2006 12:00 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Do you find that a surge supressor at the CPE is better then at the
internal PC/Router/Switch? Or do
you use one at each end?
Jeromie
Harold Bledsoe wrote:
>
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Jeromie Reeves
Sent: Saturday, August 26, 2006 9:24 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Looks good. What radio are you using with what looks to be a Realtek
SoC? Is that
a
: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
Looks good. What radio are you using with what looks to be a Realtek
SoC? Is that
a PoE splitter, a surge supressor, or both? How long is that RF pigtail?
Jeromie
Brian Rohrbacher wrote:
> I take a self tapper and run it out the bottom of my me
Mikrotik
I'll take some... Catch me offlist.
Mark
-Original Message-
From: Brian Rohrbacher <[EMAIL PROTECTED]>
Date: Fri, 25 Aug 2006 11:21:57
To:Conversations over a new WISP Trade Organization
, [EMAIL PROTECTED]
Subject: [WISPA] Self Adhesive Mini PCB supports f
Message
---
From: "Harold Bledsoe" <[EMAIL PROTECTED]>
To: "WISPA General List"
Sent: Sat, 26 Aug 2006 15:38:03 -0400
Subject: RE: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
> Perfect! :-)
>
>
-Hal
>
>
-Original
Nice work Brian.
You can always tell when someone cares about their work.
George
Brian Rohrbacher wrote:
I take a self tapper and run it out the bottom of my metal box, attach a
#12 piggy tail, and attach the other end through a hole on the board.
Kind of like the attached pic. Should work,
Perfect! :-)
-Hal
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Rohrbacher
Sent: Friday, August 25, 2006 9:17 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I take a self tapper and run it out the
wow. Got way too many requests for these. I talked to 2 people and
between the 3 of us my order will be gone. I could order more but I
don't want to feel like I am really selling these, especially using the
lists. Someone else from here ought to get 1000 from microplastics and
divide them u
From: [EMAIL PROTECTED] on behalf of Mark Nash
Sent: Fri 8/25/2006 1:04 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
I'll take some... Catch me offlist.
Mark
-Original Message-
From: Brian Rohrbacher &l
I'll take some... Catch me offlist.
Mark
-Original Message-
From: Brian Rohrbacher <[EMAIL PROTECTED]>
Date: Fri, 25 Aug 2006 11:21:57
To:Conversations over a new WISP Trade Organization ,
[EMAIL PROTECTED]
Subject: [WISPA] Self Adhesive Mini PCB supports for Mikr
AM
To: Conversations over a new WISP Trade Organization; [EMAIL PROTECTED]
Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik
https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbha
rdware
They have them in stock now. I remember there was some talk about thes
https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=cbhardware
They have them in stock now. I remember there was some talk about these
a while ago.
$50 min order so I just got 400 or so of the self adhesive PCB supports.
I got the 5/8 standoff (should be able to fit the ca
19 matches
Mail list logo
