v3 code pushed and a new
release out on SourceForge to address all the bugs that have been fixed.
virtually,
Rob Mensching
http://blogs.msdn.com/robmen
http://wix.sourceforge.net
attachment: winmail.dat
What about the option
where there is an interface for each Extension type that a single class could
implement. So you could do:
candle.exe ext extension.dll,ExtensionClass
light.exe ext extension.dll,ExtensionClass
dark.exe ext extension.dll,ExtensionClass
That ExtensionClass could
My response rate is going to diminish greatly for the next few weeks. I
have a couple deadlines I really need to hit.
Justin is still working on the final bits of the NAnt build and when
that is complete I will do a (long overdue) release of the WiX bits
again.
I know there are a few of you
My response rate is going to diminish greatly for the next few weeks. I
have a couple deadlines I really need to hit.
Justin is still working on the final bits of the NAnt build and when that is
complete I will do a (long overdue) release of the WiX bits again.
I know there are a few of you
That is one of the environment variables that we're trying to extract out of
the build system. I the archives you can see a discussion about the
different builds systems for the WiX toolset. We are slowly getting them to
be the same everywhere and work correctly everywhere. We've got the
There is currently a step missing in the documentation about building the
WiX toolset.
sn -Vr *,36e4ce08b8ecfb17
Must be run before the build (or you'll get failures about msggen.exe). I'm
wondering if this should be documented or if the build process should just
take care of it.
I didn't actually write the MsBuild tasks, so *I* didn't do anything in
there on purpose. smile/
Just because I don't see it in this thread (except in the error message)...
you can do
candle 1.wxs 2.wxs 3.wxs -out dir\
And that will compile 1, 2, and 3, into the dir relative to the current
Frederik, have you sent in an assignment agreement already? If so, then I
think I can just add you as a release manager for the project and you can
walk through the pages yourself.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Frederik Carlier
Sent:
I've been thinking about this for a while as people discussed the issues on
the mailing lists.
Here are my opinions:
1. I think that http://wix.sourceforge.net/releases should be the place
where we prop releases every time there is a weekly build of the WiX
toolset. This should happen pretty
.
-Original Message-
From: Rob Mensching [mailto:[EMAIL PROTECTED]
Sent: zondag 16 april 2006 2:31
To: Frederik Carlier; [EMAIL PROTECTED]
Subject: RE: [WiX-devs] Automated SourceForge release process
I've been thinking about this for a while as people discussed the
issues
on
the mailing
Title: [WiX-devs] Releasing Wix 2.0.3930
The IRC is still up.
irc.freenode.net
#wix
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Frederik Carlier
Sent: Monday, May 01, 2006 9:35 AM
To: DEÁK JAHN, Gábor; WiX-devs
Subject: RE: [WiX-devs] Releasing
Wix
Fredrik Grohn was
working on this. Im not sure how far he is into it... I know there
were some issues.
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Chandra Rentachintala
Sent: Wednesday, May 03, 2006 5:14
PM
To: wix-devs@lists.sourceforge.net
Subject:
To speak to one piece
here:
In our
case, a directory of .py files (a 'package') would be considered a 'component',
and my previous understanding was that a updated file would warrant a new GUID,
since it's essentially a 'new version' of the 'package'. Is that a bad
assumption?
Three
The 6.2 section of the
http://wix.sourceforge.net/tutorial
might be helpful.
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chandra Rentachintala
Sent: Monday, May 22, 2006 10:46
AM
To:
[EMAIL PROTECTED]; wix-devs@lists.sourceforge.net
Subject: [WiX-users]
Why do you need a progress bar during launch conditions? Do you really have
that many conditions? AFAIK, the Windows Installer doesn't support progress
bars at this in the sequence time so it'd have to be an external UI
handler... and that's going to take a fair bit of work to get done.
First, if you have a patch to the code, please start the discussion on the
wix-devs mailing list about that patch. There should be no confusion about
that. We talk about the code on wix-devs.
Now, Pedrum is still waiting for an answer for his last patch... but I'll
get to that (hopefully,
I'd love to be able to contribute to WiX (in particular
MSBuild support and Votive) but the hoop-jumping
required to complete the assignment agreement totally
put me off.
I know what you are saying here. The assignment agreement has been
something I've been arguing against since the
@lists.sourceforge.net; 'Frederik
Carlier'
Subject: Re: [WiX-users] [WiX-devs] Assignment agreement and updatesand/or
enhancements
Rob Mensching wrote:
[robmen] I truly hope it won't come to that. Creating a separate project
would essentially fork the development of the WiX toolset.
It shouldn't. I
It sounds like a good
thing to support somehow. I'm not sure that looking for a random
property, is a good way to go about it. Can you open a bug on Source
Forge to track the issue, so we don't lose it?
After that, we have
this problem in a few places where pieces of data need to be
-Papers.html#Copyright-Papers.
It also seems that they use a similar snail mail process...
Rob Mensching wrote:
I'd love to be able to contribute to WiX (in particular MSBuild support and Votive) but the hoop-jumpingrequired to complete the assignment agreement totallyput me off.
I know what you
Would you mind opening a bug on this to make sure it is clearly documented
in the WiX.chm Building topic?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nordvik,
Christer
Sent: Wednesday, July 12, 2006 11:18 PM
To: Bob Arnson
Cc:
Yeah, that scenario just doesnt work right. The problem is that Assemblies
going to the GAC arent committed until the very end of the install. That
means your InstallUtil calls (assuming InstallUtil can reach into the GAC,
Ive never tried) have to come after InstallFinalize. That means that
1. The .cub files are not checked into CVS today. What
you did is expected.
2. Ive never seen the LIB failure. If I was to
guess, Id bet the issue is that you have some path left over in your LIB
environment variable that NAnt doesnt like. Try removing that path
from the LIB variable...
I'm pretty sure it's not just you. Justin and I pushed
through massive changes to ClickThrough and Votive to unblock Derek so he could
get his last few changes. Things are a mess right now and I'm unwinding and
cleaning them up. I'm sorry for the trouble but now that we have
everything in,
It is on my list of things to do.
I've been waiting for the big changes in Votive and ClickThrough to
get in because I want to clean up all the dead files when doing the conversion.
I also wanted to play around with svn a bit to make sure I understood
what I was getting into.
I think there is a bug open on this issue already. It seems
that the .wixlib is not getting added to the Driver extension. I'll look
at it this weekend.
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dennis Roy
Sent: Thursday, September 21, 2006 12:27
To:
Just a little more background to clear up any confusion.
XsdGen was created by Reid Gustin. He created it for us to provide the WiX
toolset with a CodeDom over the .wxs language. That CodeDom is incredibly
useful in things like heat and ClickThrough. When first evaluating how to
created the
Fredrik hasnt ported the pubca CustomActions to WiX v3 so
they are only available in WiX v2. There is nothing in WiX v3 that will
help you with COM+ objects. Unfortunately, I dont know anything
about COM+ or how those CustomActions work, but maybe someone else here does
(or maybe Fredrik
does it work? WiX v3 is *supposed* to be
able to load v2 .wixlib files correctly. This would be a good test of
that. smile/
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rob
Mensching
Sent: Friday, September 22, 2006 10:02 PM
To: 'Dennis Roy'; wix-devs@lists.sourceforge.net
Is the environment variable WIX defined on your build machine?
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of venu madhav
Sent: Wednesday, December 06, 2006 07:34
To: WiX-devs@lists.sourceforge.net
Subject: [WiX-devs] Getting an error when compiling wxs file having $(env.WIX)
in
, December 11, 2006 22:41
To: Rob Mensching; 'Justin Rockwood'; wix-devs@lists.sourceforge.net
Subject: RE: [WiX-devs] smooth version upgrade
Thank you Rob!
Is it possible to download MSI SDK separately from Windows SDK?
Dmitry Pavlov,
Senior Software Developer
SharpStyle Labs, Inc
303 Park Avenue
-
From: Joe Kaplan [mailto:[EMAIL PROTECTED] On Behalf Of Joe Kaplan
Sent: Friday, December 15, 2006 19:42
To: Matthew Janulewicz; Rob Mensching; wix-users@lists.sourceforge.net
Subject: Re: [WiX-users] Verify user?
Luckily, I've had that problem relatively recently so it came to mind. :)
Like
That's my fault. I blew up my dev box and found my backup sourceforge SSH keys
just yesterday. CVS will get all caught up tomorrow night. Sorry, for the
trouble... the src.zip files are still up to date.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Mensching
Cc: Wix-Devs
Subject: Re: [WiX-devs] Sourceforge CVS
Thanks, I'll wait for tomorrow.
Anyway, have you ever think in change the repository to Subversion on
SourceForge? We are using it here and there are many benfits on it
over CVS.
2007/2/14, Rob Mensching [EMAIL PROTECTED]:
That's my fault
(moving conversation to wix-devs)
Ahh, yes, I see it now. Nasty trick I played on myself with the typedefs.
*phScript =
reinterpret_castWCA_CASCRIPT_HANDLE(MemAlloc(sizeof(WCA_CASCRIPT_HANDLE),
TRUE));
Should be:
*phScript =
The ExecXmlFile is already running in an elevated process so the elevation
moniker should be unnecessary. Besides, the fact that you're failing when
running as a local administrator means that UAC is not the issue. It looks
like the problem is somehow related to the file only being accessible
Still very much underdevelopment. So much under development that it doesn't
really work yet. smile/
When you say, available for use do you mean in a shipping product or to start
working with it to help us flush out bugs? If for shipping code, then it'll
probably be early next year before
Yes. It is pretty tricky stuff. Robert Flaming has a long but detailed series
of blog entries that cover some of the gnarlier parts of this stuff w.r.t.
Vista UAC (somewhere on http://blogs.msdn.com/rflaming). Once you understand
the first part, his posts are quite a fascinating read.
One
All of the MSMQ and COM+ stuff was contributed by Frederik Grohn. So, I'd say
there is a very good chance of taking another CustomAction on.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adam Langley
Sent: Wednesday, June 27, 2007 10:53 PM
To: wix-devs@lists.sourceforge.net
The hard part is convincing the Windows Installer team that manged code should
be allowed for Custom Actions. Today they do not support the use of manged
code... I haven't decided what to do about IIS yet. I keep hoping the IIS team
will step up.
short because sent from SmartPhone
]
To: Rob Mensching [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED] [EMAIL PROTECTED]
Sent: 7/12/2007 4:57 PM
Subject: Re: [WiX-devs] ConfigureIIS alterations
The hard part is convincing the Windows Installer team that manged code
should be allowed for Custom Actions. Today they do not support the use
What are the install states for the CertificateCompoent (you'll see it higher
in the log file)?
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Hancock
(HSG)
Sent: Tuesday, September 04, 2007 06:49
To: wix-devs@lists.sourceforge.net
Subject: [WiX-devs] FW: Bug?
, September 04, 2007 08:33
To: Rob Mensching
Subject: RE: Bug? InstallCertificates called when it shouldn't be?
Sorry, I assume this is what you mean. Action: Null means it decides not to
copy it, correct? Is the Request: based on feature set rather than conditions
inside the component?
MSI (s
Peter has been working on enabling this scenario. I'm not sure what the
current state is exactly (and Peter is out for the next couple weeks with his
first kid, send him congratulations). You can try the latest build and if it
isn't there it'll show up in a few weeks when Peter gets back.
Stewart; Windows Installer Support (MS Internal); [EMAIL PROTECTED];
Windows Installer XML; Rob Mensching; wix-devs@lists.sourceforge.net
Subject: RE: error 1334 due to file sequencing.
True, this is what is happening, but what I can't figure out is why this is
happening or is there anything I am
Two options:
1. Enhance the existing custom actions to support this scenario. (the ideal,
especially if you are willing to sign the assignment agreement and send your
code in).
2. Reimplement the code to find a web site that is found in the custom
actions, deferred, after the ConfigureIIs
[moving to wix-devs, a better place to talk about code]
Hmm, 2217 is over 2.5+ years old. That means it was built with 2003 compilers
and an ancient PlatformSDK etc. You really should try a more current build
with current tools. There have been an amazing number of bugs fixed in 2 years.
I don't know what the 2925 build break was about... but the darice.cub is a
file from the Platform SDK. We don't distribute that in the sources but the
build expects to find it in that directory.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian Sullivan
Sent: Monday,
Yes. For that part of the build. We did this once on the build machine and
promptly forgot about it...
From: Ian Sullivan
Sent: Monday, September 17, 2007 17:01
To: Rob Mensching; wix-devs@lists.sourceforge.net
Subject: RE: Buildable v3 release?
So are you saying I need to put (darice.cub
Take a look at NOT Installed (Installed is a built-in property).
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of li yang
Sent: Wednesday, September 26, 2007 15:20
To: wix-devs@lists.sourceforge.net
Subject: [WiX-devs] question about REINSTALL / ADDLOCAL
May have to make the Component Transitive as well... and this is a very strange
thing to do so you might just change the application to not need to do this at
all. I'd certainly recommend the latter.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob
Please, open a bug. Some internal state is not getting cleaned up correctly
across runs.
-Original Message-
From: Sebastian Brand [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 20, 2007 07:10
To: Rob Mensching; wix-devs@lists.sourceforge.net
Subject: Executing wix linker multiple
You need to have an entry section which basically boils down to one of
the following elements: Product, Module, PatchCreation, Patch. The
WiX.chm introduction talks about this.
NSENGIYUMVA DAVID wrote:
Hi,
Does anyone have an idea how to debug with light.exe?
I have managed to
release whose installation I don't want to change too much. I also don't know
if Wix 3.0 doesn't have this issue.
thanks,
Manish.==
Manish Kumar
mailto:[EMAIL PROTECTED]
+1(608)358-5055
- Original Message
From: Rob Mensching [EMAIL PROTECTED]
To: Manish Kumar [EMAIL PROTECTED]; [EMAIL
We currently require a very, very recent build of Nant to build. 0.86.2962.0;
nightly; 2/10/2008 is what the build machine is using.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alegni Herrera
Sent: Friday, May 16, 2008 12:57
To:
If you mark the Component permanent, the User will not be removed during
uninstall.
I think what we can do in this case, is present a message to the user on
uninstall and ask them if they want to retry/cancel/ignore the failure. The
user will be left behind but uninstall will still work.
And this is how we actually update it (throw back to old, old build system goo,
there are probably better ways these days):
if (5 WScript.Arguments.length)
{
helpAndQuit();
}
var FileSystem = new ActiveXObject('Scripting.FileSystemObject');
var fileType = WScript.Arguments(0);
var
The sources.zip is really intended for scanning code when debugging issues not
for building. It is missing some of the larger files. CVS should always build
though.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Ziegler
Sent: Friday, July 25, 2008 15:45
To:
candle foo.wxs build.log
From: Peter Vestergaard [mailto:[EMAIL PROTECTED]
Sent: Monday, October 06, 2008 01:49
To: wix-devs@lists.sourceforge.net
Subject: [WiX-devs] Logging
Hi.
Is there any way to log candle and light build errors and warnings to a text
file?
Best regards
Peter
. like I usually do it feels
like it skips the candle and light process. It does not build anything and no
log file is created... Maybe something to do with char?? Or what do you
think?
Thank you in advance!
Peter
2008/10/6 Rob Mensching [EMAIL PROTECTED]mailto:[EMAIL PROTECTED]
candle
Sadly. Not supported today.
From: Justin Saunders [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 07, 2008 17:07
To: wix-devs@lists.sourceforge.net
Subject: [WiX-devs] Is it possible to redirect from a WebVirtualDir
Hi,
Is it possible to set-up a redirect for a WebVirtualDir element using WiX?
I'm seeing it in CVS:
http://wix.cvs.sourceforge.net/viewvc/wix/wix/src/ext/VSExtension/wixlib/vs2005/VS2005_VSIPCC_Collection_Files_RTL_---_---.wxs?view=log
-Original Message-
From: Thomas S. Trias [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 08, 2008 11:13
To:
Message
Subject: Re: [WiX-devs] Where is
vs2005_VSIPCC_Collection_Files_RTL_---_---.wxs
From: Rob Mensching [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED], Windows Installer XML
toolset developer mailing list wix-devs@lists.sourceforge.net
Date: 10/9/2008 7:50 PM
I'm seeing
Interesting stuff, I need a little time to digest it all... give me a week
after PDC since right now I'm crushed behind that.
From: Cody Cutrer [mailto:[EMAIL PROTECTED]
Sent: Friday, September 26, 2008 09:09
To: Windows Installer XML toolset developer mailing list
Subject: [WiX-devs]
Especially when my day job is feeding code into one or two keynotes at PDC...
yeah, it gets in the way. smile/
From: Thomas S. Trias [mailto:[EMAIL PROTECTED]
Sent: Friday, October 10, 2008 10:11
To: Rob Mensching
Cc: Windows Installer XML toolset developer mailing list
Subject: Re: [WiX-devs
The Windows Installer supports that?
From: Vuchuru, Surekha (SBT US EXT) [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 05, 2008 12:33
To: wix-devs@lists.sourceforge.net
Subject: [WiX-devs] Checkboxes insde a listbox
Hello All,
I am trying to create a listbox which has more than one
Light has the default Binder extension built in. Take a look at that for the
current implementation. I'm not aware of any other public implementations.
From: Thomas S. Trias [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 05, 2008 13:23
To: Rob Mensching
Cc: Windows Installer XML toolset
Mensching)
3. Checkboxes insde a listbox (Vuchuru, Surekha (SBT US EXT))
4. Re: Checkboxes insde a listbox (Rob Mensching)
5. Re: Use URI's for file source (Thomas S. Trias)
--
Message: 1
Date: Wed, 05 Nov 2008 10:36:11
For general, WiX questions, you really should direct your questions to [EMAIL
PROTECTED]mailto:[EMAIL PROTECTED]
Your verbose log file will explain why the Component was uninstalled
From: Vuchuru, Surekha (SBT US EXT) [mailto:[EMAIL PROTECTED]
Sent: Thursday, November 06, 2008 11:43
To:
I've been trying to get a hold of them myself. Since Thanksgiving the people
I've been trying to reach have been out of office. I do not know what is going
on there...
-Original Message-
From: Thomas S. Trias [mailto:tomtr...@artizan.com]
Sent: Wednesday, December 17, 2008 08:17
To:
: Re: [WiX-devs] Does getting one's changes integrated into WiX
stillrequire an Assignment Agreement?
From: Rob Mensching rob.mensch...@microsoft.com
To: tomtr...@artizan.com tomtr...@artizan.com, Windows Installer XML
toolset developer mailing list wix-devs@lists.sourceforge.net
Date: 12/17
I think it is fixed in the most recent build... history.txt or the feed will
tell you for sure.
From: Matt Ziegler [mailto:idaho...@gmail.com]
Sent: Tuesday, January 20, 2009 12:06
To: Windows Installer XML toolset developer mailing list
Subject: [WiX-devs] BinaryRef is not pulling in the Binary
Cool. It's in now.
From: Neil Sleightholm [mailto:n...@x2systems.com]
Sent: Sunday, January 18, 2009 14:54
To: wix-devs@lists.sourceforge.net
Subject: [WiX-devs] NAntTasks doesn't support newer light options
I have posted a fix to this here:
Documentation is busted, oops. However, none of the standard heat arguments
use a colon. The other things are extensions and are not part of heat. The
colon was unusual compared to most of the other options. It doesn't help that
light is confused (like -cultures sigh/).
Colons have been
to the MsiAssemblyName
table.
/// /summary
[BooleanValidator]
[TaskAttribute(fileversions)]
public bool FileVersions
Neil
From: Rob Mensching [mailto:rob.mensch...@microsoft.com]
Sent: 23 January 2009 08:07
To: Windows Installer XML toolset developer mailing list
Subject: Re: [WiX-devs] NAntTasks
For general, WiX questions please use
wix-us...@lists.sourceforge.netmailto:wix-us...@lists.sourceforge.net
No idea what Glassfish Application is... maybe you should ask them how to
install their stuff?
From: Hukumchand Shah [mailto:hukum.s...@gmail.com]
Sent: Monday, January 26, 2009 21:56
Installer XML toolset developer mailing list
Subject: Re: [WiX-devs] Heat change -indent
Rob Mensching wrote:
Documentation is busted, oops. However, none of the standard heat arguments
use a colon. The other things are extensions and are not part of heat. The
colon was unusual compared
the documentation and post a patch here.
Neil
-Original Message-
From: Rob Mensching [mailto:rob.mensch...@microsoft.com]
Sent: 27 January 2009 16:04
To: Windows Installer XML toolset developer mailing list
Subject: Re: [WiX-devs] Heat change -indent
Yeah, it looks like there are a lot
. - Me
http://icumove.spaces.live.com
On Tue, Jan 27, 2009 at 8:05 AM, Rob Mensching
rob.mensch...@microsoft.commailto:rob.mensch...@microsoft.com wrote:
Cultures is weird and complex which sad since it has to be used so much. The
other uses of colon are just misguided (followed the wrong pattern
...@gmail.commailto:idaho...@gmail.com wrote:
Ah...good deal. Thank you.
On Tue, Jan 20, 2009 at 12:11 PM, Rob Mensching
rob.mensch...@microsoft.commailto:rob.mensch...@microsoft.com wrote:
I think it is fixed in the most recent build... history.txt or the feed will
tell you for sure.
From: Matt Ziegler
);
+this.indent =
Int32.Parse(parameter.Substring(7), CultureInfo.InvariantCulture);
}
catch
{
Neil
-Original Message-
From: Rob Mensching [mailto:rob.mensch...@microsoft.com]
Sent: 27 January 2009 16:46
To: Windows
This should be in the next release.
From: Neil Sleightholm [mailto:n...@x2systems.com]
Sent: Sunday, January 25, 2009 06:56
To: Windows Installer XML toolset developer mailing list
Subject: [WiX-devs] NAntTasks documentation
I have posted some documentation for the NAnt tasks here:
This should be in the next release.
From: Neil Sleightholm [mailto:n...@x2systems.com]
Sent: Saturday, January 24, 2009 06:28
To: wix-devs@lists.sourceforge.net
Subject: [WiX-devs] NAntTasks don't initialise exedir
I have posted a fix to this here:
CVS and it looks and works ok.
Neil
-Original Message-
From: Rob Mensching [mailto:rob.mensch...@microsoft.com]
Sent: 30 January 2009 20:32
To: Windows Installer XML toolset developer mailing list
Subject: Re: [WiX-devs] Heat change -indent
Neil, I had to tweak the last bit of code a bit
Should be in tonight.
From: Bob Arnson [mailto:b...@joyofsetup.com]
Sent: Monday, February 02, 2009 21:50
To: Windows Installer XML toolset developer mailing list
Subject: Re: [WiX-devs] FW: [ wix-Bugs-2555688 ] Heat cannot harvest websites
Neil Sleightholm wrote:
I have volunteer several times
I agree, 2 seemed best.
From: Neil Sleightholm [mailto:n...@x2systems.com]
Sent: Sunday, February 01, 2009 10:14
To: Windows Installer XML toolset developer mailing list
Subject: [WiX-devs] Website harvester
I am looking at this bug:
Not available yet... coming in the next month or so.
Matt Ziegler wrote:
Can anyone direct me where to find the current source code for WiX Burn?
Thanks
Matt
Sorry, this is on me and I've been very busy lately with (unexpected)
project overhead. Once I get all the pieces back in order I'll get to
this, I promise. Should be next week or two. sigh/
Neil Sleightholm wrote:
Any news on getting this patch integrated in to the release?
Neil
Yeah, the big changes from Brian lost those. They should be back in the
next build. Sorry about missing that.
Neil Sleightholm wrote:
Does anyone know why the changes I made to fix bug 2474846
(https://sourceforge.net/tracker/index.php?func=detailaid=2474846group_id=105970atid=642714
To be more clear, *I* lost the changes not Brian. The integration was my
mistake. *Brian* was kind enough to have fixed this build. So all my
fault and all goodness to *Brian* and *Neil* for the original fix.
Rob Mensching wrote:
Yeah, the big changes from Brian lost those. They should be back
This should *finally* be in. Sorry, for taking so long.
Neil Sleightholm wrote:
Me again, any chance of getting this in to the code before WiX3 is
closed?
Thanks
Neil
-Original Message-
From: Rob Mensching [mailto:r...@wixtoolset.org]
Sent: 07 April 2009 18:21
To: Windows
to write extensions like this without needing to add it to the core.
Neil
-Original Message-
From: Rob Mensching [mailto:r...@wixtoolset.org]
Sent: 16 May 2009 03:37
To: Windows Installer XML toolset developer mailing list
Subject: Re: [WiX-devs] Heat - performance counter
.
Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev
___
WiX-devs mailing list
WiX-devs@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wix-devs
--
virtually, Rob Mensching - http
___
WiX-devs mailing list
WiX-devs@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wix-devs
--
virtually, Rob Mensching - http://RobMensching.com LLC
--
Return
/wix-devs
--
virtually, Rob Mensching - http://RobMensching.com LLC
--
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities
:* Rob Mensching [mailto:r...@robmensching.com]
*Sent:* 16 January 2010 19:27
*To:* Windows Installer XML toolset developer mailing list
*Subject:* Re: [WiX-devs] Burn Source
Thanks, Neil. I'll fix the sources.zip and get the CVS push tonight.
On Sat, Jan 16, 2010 at 6:50 AM, Neil
/listinfo/wix-devs
--
virtually, Rob Mensching - http://RobMensching.com LLC
--
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online with enterprise data centers and the best network
://lists.sourceforge.net/lists/listinfo/wix-devs
--
virtually, Rob Mensching - http://RobMensching.com LLC
--
___
WiX-devs mailing list
WiX-devs@lists.sourceforge.net
https
That is one of my goals. The internal processes I have with CVS is pretty
complex today. I really want to simplify it but I need to balance that
desire against disrupting v3.5 and v3.6 work.
--
virtually, Rob Mensching - http://RobMensching.com LLC
On Mon, May 3, 2010 at 3:04 PM, Neil
though. It helps to know someone cares.
On Sun, May 9, 2010 at 1:31 AM, Neil Sleightholm n...@x2systems.com wrote:
Rob
Any news on the switch to Mercurial?
Neil
*From:* Rob Mensching [mailto:r...@robmensching.com]
*Sent:* 29 April 2010 21:43
*To:* Windows Installer XML toolset
1 - 100 of 726 matches
Mail list logo
