Hello wsjtx development team,
I have noticed a behavior at FT4 mode on "VHF and submode features".
If "Rig" split operation is set in configuration, VFO-B becomes the same
as VFO-A. It is the same as that of JT4, JT9, JT65 and Q65 modes.
In FT4, which is said to be a contest specification in HF
Reino - OH3MA,
The radio is an Elecraft K3 with audio fed via USB cable from its internal
CODEC. I received a call from Sam, W2JDB, creator of the QLog program for
blind Hams to use FT8/FT4. Sam suggested that the problem may be that
Windows, for some reason, stops handling the time correction
My comments were based on the instructions included in the user manual, and the
information that is displayed when you hover the mouse over the dB reading, and
my experience operating from 1 to 10 GHz.
30 dB with no signals present is recommended. I have never seen a 50 dB over
S9, or even an
On 3/17/2021 12:29 PM, Donhawbaker wrote:
The receive level, i.e. mic gain, should be set to 30, not 50 or 60.
I strongly disagree with this advice when there are very strong signals
present. On 6M and 160M which I most often use WSJT-X modes, I often see
my neighbors decoding in the range
The receive level, i.e. mic gain, should be set to 30, not 50 or 60.
>
> On Mar 17, 2021 at 3:10 PM, (mailto:reino.tala...@kolumbus.fi)> wrote:
>
>
>
>
>
>
> I'm passing along this info for others who might be experiencing low
>
I'm passing along this info for others who might be experiencing low numbers of
FT8 decodes.
In the past month on 3 occasions the number of FT8 decodes on very busy bands
didn’t match the activity noted on the Wide Graph. Although many dozens of
stations were seen, fewer than 10 were being
I'm passing along this info for others who might be experiencing low
numbers of FT8 decodes.
In the past month on 3 occasions the number of FT8 decodes on very busy
bands didn’t match the activity noted on the Wide Graph. Although many
dozens of stations were seen, fewer than 10 were being
Another report of the rc3 MacOS audio issue as well. Flex 6600, SmartSDR for
Mac 1.4.34, and Intel Mac mini OS 11.2.3.
Not always reproducible, but relatively frequent.
George J Molnar, KF2T
College Park, Maryland, USA
___
wsjt-devel mailing
Hi Bill and [WSJT-X Devel] group:
More info on this bug:
This “TX but no audio” on first transmission after band change issue persists
as well in 2.4-rc3, using an iMac and KX3. Second TX cycle, all is well. The
behaviour is generally reproducible, but not always. I’ve seen it on FT8,
>
> I've been having the same issue - no transmit audio although TUNE does
> work. Same setup except I'm connected to the IC7300 directly via USB.
>
dave
k2lyv
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
Hi Mike,
Was running 2.4.0-rc3 tonight testing with another station We made some
contacts I was on RC1 and he was on rc2 on submode B. We both upgraded
to rc3. We decided to see what would happen on Submode C. I was on
T/R=15sec and left it there so the Tx Freq box turned red, no surprise
For a test please connect WSJT_X directly to the 7300 instead of Win4Icom.See
if that makes a difference.
Mike W9MDB
On Wednesday, March 17, 2021, 06:40:49 AM CDT, Craig
wrote:
Hi all,
I am running WSJT-X 2.4.0-rc3 on an HP 8200 Elite with 8G ram.
This is connected to an IC-7300
For a test please connect WSJT-X directly to the 7300 instead of Win4Icom.See
if that makes a difference.
Mike W9MDB
On Wednesday, March 17, 2021, 06:40:49 AM CDT, Craig
wrote:
Hi all,
I am running WSJT-X 2.4.0-rc3 on an HP 8200 Elite with 8G ram.
This is connected to an IC-7300
Hi all,
I am running WSJT-X 2.4.0-rc3 on an HP 8200 Elite with 8G ram.
This is connected to an IC-7300 via Win4Icom.
Normally I run V2.2 of WSJT-X. I decided to update to WSJT-X 2.3 GA and
found that my audio was not working on transmit. I confirmed all my
drivers and settings were consistent
On 11/03/2021 00:39, Al Flapan wrote:
As you can see from the syslog file when using GA 2.3.0 I have no real
issues but when using 2.4.0rc2 I see these items.
I am using a HP deskop running W10 Pro and I have both programs on the
same machine. The radio is an ICOM 7100
connected to the
Hi guys,
Was running 2.4.0-rc3 tonight testing with another station We made some
contacts I was on RC1 and he was on rc2 on submode B. We both upgraded to rc3.
We decided to see what would happen on Submode C. I was on T/R=15sec and left
it there so the Tx Freq box turned red, no surprise
16 matches
Mail list logo
