Hi All,
As WSJT is an integral part of EME, some of you might be interested to
know that the 20th International EME Conference will be held this Summer in
the NYC/Phili area. In addition to presentations from some of the leading
experts in the application of WSJT to EME, there will be a separ
I have it working again.
I had disconnected all cables from the laptop to access the battery. When I put
it all back together I had swapped the cables for the TS-590S USB port and a 10
port USB hub. I only realized this error when WSJT-X did not see my TS-590S
USB audio CODEC.
When I put the
I'm using WSJT-X ver 2.6.1 on a Win 8.1 laptop. I have been using OmniRig as
my radio interface for many months and the only issue has been that first start
after a new installation WSJT-X will fail to connect to OmniRig. It always
connected ok for second and subsequent starts.
Now I cannot c
Hi David
I will have a look here also. I am not familiar with those settings, yet,
in SDRC. I more or less used it 'out of the box'.
73
Charlie
On Tue, 19 Dec 2023 at 11:35, David Hilton-Jones via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Many thanks Charlie
>
>
>
> Done some f
Hi David,
It seems that SDR Console stopped sending its I/Q data stream to QMAP,
or for some reason QMAP closed its input port. Unless you can find a
way to replicate this unwanted condition at will, I have no particular
suggestions. I have never seen a comparable fault in the Linrad-to-QMAP
Many thanks Charlie
Done some further testing this morning and I think I have a partial
explanation/solution.
Windows 10
WSJT-X rc2
QMAP
SDRC
RSPDx
No moon to play with at the moment, but just played with hitting “Tune” in
WSJT-X.
If the auto-mute in DRC is off, then there
