It's already been done many different ways.
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 6/14/2018 1:14 AM, DM2CYN wrote:
Michele,
interesting topic! Go on and let us know your results!
Vy 73 Leo
Am 13.06.2018 um 23:05 schrieb Mi
where does the exported cabrillo get saved?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 10/24/2018 10:12 PM, Adam Bartlett wrote:
I saw the number 5 behavior as well.
I was not able to get CQ RU RU to happen, and the commands to move
up
Hi Joe,
Thats what I thought would happen. But after the test last night I did
do that sequence, and the usual popup asking where to save it never
appeared. So I thought it just does it to some default location.
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http
The reason for the very low noise floor is mainly your antenna.
You are using more or less a very short length "Beverage" antenna.
Google Beverage Antenna
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 12/28/2018 10:27 AM, Simon wr
Hi Group,
during tests with FST4W and very low power ( 25µW) I noticed that power < 1
mW cannot be set in the GUI.
That was different in the past. I just checked, even in WSPR-X, you could
set the power down to - 30 dBm.
This should be taken into account in a final version.
73 Joe
DF
Hello Bill,
0 dBm is far too much for me and some others.
The old WSPR versions go down to - 30 dBm
On LF and ELF not the transmitting power but the radiated power (ERP) is
entered and especially on ELF ERP powers below 0 dBm are more common than
higher powers ;i)
73 Joe
Von: Bill
Hi guys,
a well known OM has problems to get his Yaesu FT-DX101D with FT8 to
transmit.
Reception is ok, PTT works but no audio output.
any hints or suggestions?
73 and happy hollidays
Joe
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
Hello friends,
I just received the feedback, problem solved, FT8 now works fine with the
device.
Thank you very much for the helpful hints ;o)
73 Joe
Von: Black Michael via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Gesendet: Sonntag, 27. Dezember 2020 18:19
An: WSJT software
Hello folks,
I would like to test Q65 on 2m but what is the recommended frequency for
terrestrial scatter operation?
The default of 144.120 MHz is probably for EME.
73 Joe
--
Diese E-Mail wurde von AVG auf Viren geprüft.
http://www.avg.com
Hi Joe,
despite several inquiries (ON4KST, HB9Q) nobody could tell me the recomended
frequencies for Q65 in terrestrial use, or scatter on 144/432 MHz.
I would like to do some "dry runs" before my EME setup is ready.
73 Joe
DF2JP
-Ursprüngliche Nachricht-----
Von: Joe Taylor
installation file:
Right click on the installation file > Properties, there at the bottom, at
"allow" set a hook. then the installation works without problems.
Sorry I have only a German Windows, that will differ from language to language.
73 Joe
--
Diese E-Mail wurde von
At 15:00Z here in SW Wisconsin they are S-5,
But I'm not sure what mode.
On AM Barely Understandable,
On LSB forget it, just a mess.
On USB perfect audio, just like I remember from my SWL days on the 7.3xx
freq. AM
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
I had a similar issue, the fix was a cheap ground loop isolation
transformer cable.
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 7/23/2017 7:35 AM, Costantino Cerrotta wrote:
Hi Bill,
thanks for fast reply.
I'm wondering why on JT65 I
Where can I go to learn more about this mode?
Is it very wide or what is the reason why it isn't useable below 50 Mhz?
Joe WB9SBD
--
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tym
Just watching the program.
Even ON ( Checked) The program transmits from 00 to 15, rec 15 to 30
transmits 30 to 45, recv 45 to 00.
Odd just flips them all.
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 8/4/2017 6:03 PM, Gary McDuffie
Being semi blind,
Can the main buttons, the Log QSO, Stop, Monitor, etc. row of buttons,
Can they be user changed colors?
Joe WB9SBD
--
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
---
This email has been checked for viruses by AVG.
http://www.avg.com
does answer? Even if it takes 6 hours?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 9/8/2017 12:42 PM, Gary McDuffie wrote:
On Sep 8, 2017, at 9:30 AM, Rich - K1HTV wrote:
Instead, what happens when the "Disable Tx after 73" box
I just WSJT-X and JT-Alert can figure out how to run split together.
I love how JT-Alert works, and does, but any clicking in JT-Alert puts
both REC and TX on the same freq no matter what you have checked in WSJT-X
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http
f interference
is to transmit on and thats where it does transmit?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 10/18/2017 2:57 AM, David Alloza wrote:
Hi Bill,
Lock Tx=Rx was useful with my too drifting Tx. When I use FT8 autoseq
, and regardless what part of a
QSO it was in when the shut down happened, it automatically goes back to
TX6 ready to CQ when the enable button is again activated.
Possible?
Joe WB9SBD
--
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
---
This email has been
or anything at all.
Take a small free program like "Auto Mouse Click" and 5 minutes later,
you have a QSO Robot.
Funny, never heard any rage back then.
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 3/31/2019 2:52 PM, James Shaver w
I'm curious as to how someone knows someone is running a BOT or not?
I mean if the system is running perfectly, and or the operator is also
on top of things. How can someone on the other end tell the difference?
Just curious...
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
are you talking about the 7047 frequency?
Is so, then possibly the issue is because of the W1AW CW Practice
frequency is
7.0475
Could be a problem?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 4/30/2019 6:43 AM, Gary Kohtala - K7EK
I thought the FT-4 signal is only 90 Hz wide
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 4/30/2019 7:30 AM, Bill Somerville wrote:
Hi Gerard,
the Region 1 band plan specifies modulation not exceeding 500 Hz for
7046.5, Region 2
. But I can not
find a way to change the freq. the Band pull down menu thing won't even
pull down, it's stuck on only 40 meters.
Joe WB9SBD
--
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
___
wsjt-dev
could it be possible to like if running CW with a logger like N1MM+ if
you need to make a repeat, be able to hit a "F" Key to send whatever is
needed to be repeated?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 5/9/2019 8:28 AM,
What Logger is anyone planning to use for this contest?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 6/29/2019 3:25 PM, Don Hill AA5AU wrote:
For immediate release. June 29, 2019.
The World Wide Radio Operators Foundation (“WWROF”), in
..
Some just close the whole program,
others open the settings window,
and in there it is not telling it to look at the radio,
what should I check to make it stop trying?
Joe WB9SBD
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https
This is even stranger,
My soundcard is a Soundblaster Recon 3D
And when I isnstalled the new software, it could not find the soundcard.
Then I looked and I couldn't either! I had to re-0install the sound card
software how weird is that!?
joe WB9SBD
Sig
The Original Rolling Ball Clock
What does this do?
And how does one use it?
Joe
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Plus,
it doesn't do anything.
Joe WB9SBD
On 7/16/2019 5:07 PM, K2DBK-WSJT wrote:
It’s documented in the FT4 protocol guide:
“The FT4 Protocol pdf says: "Clicking this button during an Rx cycle
arms the program to examine all CQ messages decoded at the end of the
6-second Rx seq
Yup did exactly that and it did nothing.
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 7/16/2019 11:16 PM, Neil Zampella wrote:
Actually, it does. It needs to be clicked on during the Rx period,
and its only active during that initial
Win 10
The latest version, V2.1.0 24fcd1
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 7/17/2019 9:09 AM, Neil Zampella wrote:
What version of the program are you using, for what OS ?
Neil, KN3ILZ
On 7/17/2019 9:56 AM, Joe wrote:
Yup did
sorry 64
On 7/17/2019 9:25 AM, Neil Zampella wrote:
32 or 64 bit ?
On 7/17/2019 10:19 AM, Joe wrote:
Win 10
The latest version, V2.1.0 24fcd1
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 7/17/2019 9:09 AM, Neil Zampella wrote:
What
as not checked, but now is, will try it later and see what happens.
Thanks
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 7/17/2019 9:25 AM, Kari wrote:
On 17.7.2019 16.56, Joe wrote:
Yup did exactly that and it did nothing.
Joe WB9SBD
Hi
No change, it changes to RED and stays that way forever and nothing happens.
Joe WB9SBD
On 7/17/2019 9:57 AM, Joe wrote:
as not checked, but now is, will try it later and see what happens.
Thanks
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
I will double check the colors, BUT
Thinking Why should those make any difference at all anyway?
It is not just listening to all who is CQing, and then grab who is the
strongest?
Why should any of those choices below make any difference?
Joe WB9SBD
Sig
The Original Rolling Ball
Thanks Joe,
This explanation is what I was missing!
a OK,
so then forget this button, because I'm 99.% all set up for
contesting with the N1MM+ telling WSJT-X all that, who is dupes, who is
good, who is a new mult etc. so this S&P button is more or less don't
worry a
I think I was in contesting mode.
I started N1MM+, for the WWDIGI Contest, then had N1MM+ Open the WSJT-X
program,
It all works fine but when the contact is complete the box still appears
prompting me to log the contact. what do i need to set differently?
Joe WB9SBD
On 7/22/2019 10:15
But?
It is a contest, it is fully integrated with N1MM+ the WWDIGI contest
https://ww-digi.com/rules.htm
The paired software is telling me who is a New mult, who is good to
work, who is a dupe etc. N1MM+ is even what opens WSJT-X, so what part
of being in a contest am I missing?
Joe WB9SBD
OK, But if I check that box, None of the choices it wants you also pick
fits true?
or what should I chose? to fool it?
the exchange is the typical any day FT exchange 4 digit grid square,
what would work?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle
Thanks Sam
Joe WB9SBD
On 7/23/2019 10:57 AM, Sam W2JDB wrote:
HI Joe,
I understand you conundrum but the auto logging feature is only active
when that Spcl Oper checkbox is checked. That is what I tried to
explain in my first message. Maybe the developers can add some other
options.
73,
Sam
t off the TX enable button till it gets the 73?
or how should this situation be handled?
Joe WB9SBD
--
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https:
ot show them at
all even. Why take up space at all?
Joe WB9SBD
--
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
m that one
last cycle decoded?
3- Dupes, Yup color coding is nice, But how about not show them at
all even. Why take up space at all? There were times in the N1MM Decode
list window I would have it maxed out size wise, but all it was is
dupes. Luckily in the WSJT-X window I could see some fresh
much larger and more active development group it seems the
right thing to do. Am I forgetting anything important?
-- Joe, K1JT
--
Slashdot TV. Video for Nerds. Stuff that Matters.
http://pubads.g.doublecli
nded behavior I think.
The behavior you describe is the intended behavior.
There are exceptions, of course, but in general one sends a free-text
message only when a QSO is "complete" and therefore ready to be logged.
Just hit "Cancel" if your QSO is not comp
ent
development (new program features, etc.) will take place there.
Note: All of the above refers to WSJT-X only; activity in other branches
of our repository may continue normally.
Does this sound right? Have I got something wrong,
ml with installation
packages built from the tagged revision. However, I'm presently
inclined to allow the manual that's brought up in a browser (when the
user hits "F1") to keep changing as further improvements are made.
-- Joe
---
ch is what needs to be on your
> CMAKE_PREFIX_PATH. On Windows you almost certainly will be using a CMake
> toolchain file and this is where you will need to specify the hamlib
> binary location as one of the paths in CMAKE_PREFIX_PATH.
Both "make" and "make install" ran to compl
n the JTSDK-QT environment CMD shell:
build wsjtx rinstall
build wsjtx package
-- Joe
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS
Help menu item "Online User's Guide" to
read "Online User Guide".
Bill, are you going to commit the change with a box for "Allow Tx
frequency changes while transmitting"?
-- Joe
ly what you want? I can't recall that I've ever seen
anything in the "package" directory.
-- Joe
On 9/24/2014 1:11 PM, Bill Somerville wrote:
> On 24/09/2014 18:00, Joe Taylor wrote:
>> Hi all,
> Hi Joe,
>>
>> Should the installation packages f
he manual.
-- Joe
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download Wh
RR Greg, thanks. After updating from C:/JTSDK-DOC/doc,
wsjtx-1.4.0-rc1-win32.exe shows up in the package directory.
-- Joe
On 9/24/2014 1:44 PM, KI7MT wrote:
> Hi Joe,
>
> On 9/24/2014 17:21, Joe Taylor wrote:
>> Bill, Greg, and all --
>>
>> I'd say di
Hi all,
Does anyone have last-minute "must do" commits for the WSJT-X code?
Are we converging toward tagging revision 4363 as "release candidate 1"
for version 1.4.0 ?
-- Joe, K1JT
---
RR Bill, thanks for the update.
-- Joe
On 9/25/2014 10:18 AM, Bill Somerville wrote:
> On 25/09/2014 15:13, Joe Taylor wrote:
>> Hi all,
> Hi Joe,
>>
>> Does anyone have last-minute "must do" commits for the WSJT-X code?
>> Are we converging
Hi all,
> OK, I think I'm done.
Full marks, indeed -- to all who have contributed so much! Bill, would
you like to create a tag of .../branches/wsjtx at r4370? Packages for
WSJT-X-1.4.0-rc1 would then be built from that revision, for all
supported platforms.
Mike --
> Credits mismatch between About window and the manual
Thanks for catching this discrepancy. The online manual has been fixed;
we'll need to correct the list in "About" in rc2.
-- Joe, K1JT
-
R,
WSPR-X, and WSJT-X are all part of the same "project". Historically,
the "trunk: of the project is WSJT.
-- Joe, K1JT
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achiev
Hi Bill,
Joe:
>> All seems OK to me, except possibly for your parenthetical statement
>> "one day we really need to move this to trunk".
>> We can't do this unless we give up the notion that WSJT, MAP65, WSPR,
>> WSPR-X, and WSJT-X are all part of the same
anches/wsjtx).
Actually that was me, not Greg. And I thought I had done the desired
merge -- but I recognized, after the fact, that I had not done it
correctly. :-(
I decided to put a corrected merge off until tomorrow... (am not on the
same computer, now).
l. I
removed the "-j..." flag on the call to make, but still no joy. The
machine is a Xeon with 2 processors and 1 GB memory. It builds wsjtx
without problems from within jtsdk.
FYI: I'll be tied up all day tomorrow (Saturday).
-- Joe
On 9/26/2014 5:22 AM, ki7mt wrote:
&g
e one explicit
call to make -- and the script was still running many jobs in parallel.
I did not (yet) investigate further.
-- Joe
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3
Greg was in response to his message (quoted below mine)
about a single stand-alone script that would build youe hamlib3 and
wsjtx. With that script, this machine thrashes and does not succeed.
It's not a problem; just information for Greg.
-- Joe
candidates are frozen as they now
stand, but the User Guide will continue to be improved, as needed.
-- 73, Joe, K1JT
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compli
? Is this necessary? It causes a brief gap in received
audio, presumably degrading (slightly) the chances for successful decodes.
-- Joe, K1JT
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Hi Bill,
I'm using the hamlib interface.
-- Joe
On 10/1/2014 10:24 AM, Bill Somerville wrote:
> On 01/10/2014 15:22, Joe Taylor wrote:
> Hi Joe,
>> I have noticed that when operating in Split mode, double-clicking on a
>> line of decoded text causes a momentary ch
Bill --
Yes, TS-2000. I can use either a Debug or Release configuration -- let
me know which would be useful. I probably won't get to doing further
tests until this evening.
-- Joe
On 10/1/2014 10:59 AM, Bill Somerville wrote:
> On 01/10/2014 15:56, Joe Taylor wrot
duce
the problem. Please read the WSJT-X User Guide first!
We look forward to your feedback on this release candidate for WSJT-X 1.4.
-- 73, Joe, K1JT (for the WSJT Deveopment Team)
--
Meet PCI DSS 3.0 Compli
Tnx Bill -- I believe they're fixed now.
-- Joe
On 10/1/2014 11:40 AM, Bill Somerville wrote:
> Hi Joe,
>
> links to the 1.4 user guide are broken, pointing to a file on C:.
>
> 73
> Bill
> G4WJS.
>
> -
-lib\i686-pc-mingw32\4.0.3
Obviously this is not good for builds in the JTSDKs!
I suggest you put the following somewhere in jtsdk-qtenv.bat:
SET LIBRARY_PATH=""
Does this make sense?
-- Joe
--
Me
FYI
Original Message
Subject: Re: Public beta release of WSJT-X 1.4.0
Date: Wed, 1 Oct 2014 11:01:05 -0700
From: pennino...@yahoo.com [wsjtgroup]
Reply-To:
To:
Split operation has a bug; this worked fine in 1.3.
TS-2000 with Commander for control.
If split is set to rig, it
LIBRARY_PATH anywhere in your scripts, but some of the tools do. We
want it defined as NULL, even if a user normally has it set otherwise
(for use in other environments).
-- Joe
--
Meet PCI DSS 3.0 Compliance Requi
RR, 4427 is OK.
But if LIBRARY_PATH defined to be a NULL string, why include it in PATH
at all?
-- Joe
On 10/1/2014 2:40 PM, KI7MT wrote:
> Hi Joe,
>
> Yes, it did here too. Had to move the %LIBRARY_PATH% to the end of the
> %PATH%
>
> Should be ok now, I just bui
It seems that it's probably time to remove the "Archival Windows
releases" (v1.1, r3496 and v1.2.1, r3590) from the WSJT web site.
Does anyone know of reasons why either should be retained any longer?
Hi Eddy,
Thanks for your report. I'm not aware of any problems with v1.4 talking
to an FT-847, but we'll look into it and will be in touch if we need
more information.
-- Joe, K1JT
On 10/1/2014 2:26 PM, Edward Payne wrote:
> Hi Joe,
>
> I would like to firstly say
solve them. You are hereby put down to receive the WSJTX
Medal of Honor!
I know these are mostly things for which you're the obvious point
person... but please feel free to assign tasks to others of us if/when
that seems appropriate.
--
Thanks, Sandro! Probably the script(s) should be modified so that the
local copy of wsjtx-main.html is always deleted and a new copy is
downloaded.
Please join the wsjt-devel mailing list -- otherwise your posts will
always require administrator approval.
-- Joe, K1JT
On 10/2/2014
Bill --
For what it's worth: the CW ID message with shaping sounds very good on
all systems I've tested.
-- Joe, K1JT
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve P
nd Shelter Island in Peconic
Bay. Lots of boats, narrow channel, strong currents, rocks,
ferrieswhat could go wrong?"
If nothing does, I should be back by Sunday afternoon. (Probably still
wet: it's supposed to rain all day to
Hi all,
For the record, I have copied below a few messages sent by WSJT-X v1.4
users to me directly. Bill, in particular, might want to respond to some.
-- Joe
###
Original Message
Subject: Latest
Details", in the WSJT-X
User Guide:
http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main.html#TXRX
You can follow the sequence of DSP operations there, and then look at
the code for additional details.
-- 73, Joe, K1JT
-
then see a listing of files in the WSJT-X writeable-files
directory, including your ADIF log file.
-- 73, Joe, K1JT
--
Slashdot TV. Videos for Nerds. Stuff that Matters.
http://pubads.g.doubleclick.net/gamp
useful than generating
"DE DU2/WA8UGN PK08".
I am taking the liberty of copying this response to the "wsjt-devel"
mailing list, so that others in our development group will know what we
have discussed.
-- 73, Joe, K1JT
On 10/7/2014 10:51 AM, Paul Keating wrote:
&g
inceton.edu/pulsar/K1JT/JT65.pdf
You might also want to experiment with the utility programs
jt9code[.exe] and jt65code[.exe]. They are described in the WSJT-X User
Guide at
http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-mai
Follow-up, for information on the wsjt-devel list:
Original Message
Subject: Re: WSJT-X Beta Version 1.4 -- Report
Date: Wed, 8 Oct 2014 18:49:05 +0800
From: Paul A. Keating
To: Joe Taylor
QSL, Joe -
Agree with all you say - have been using "work-arounds" quite
Hi Jim,
I am copying this brief reply to the wsjt-devel list, where I'm sure one
of our group familiar with the K3 can get you straightened out.
-- Joe, K1JT
On 10/9/2014 1:58 PM, James Denneny wrote:
> Hi Joe
>
> I am a new WSJT user and am having a setup issue. I am r
for catching the typo in the source file environment.adoc, also!
-- 73, Joe, K1JT
On 10/11/2014 7:36 PM, Alessandro Gorobey wrote:
> Hi All,
>
> Just a small clarification on dev-guide.
>
> http://physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjt-dev-guide.html
> contain a
nsequenced
modifications", and the code now executes correctly with all the
compilers I've been testing.
Three cheers for clang!!!
-- Joe, K1JT
--
Comprehensive Server Monitoring with Site24x7.
Monitor 1
ion profiler for jt9.exe ?
-- Joe, K1JT
--
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective a
Hi Diane,
> O!! Perhaps we can get a version compiled up for FreeBSD now? This
> is exactly what we saw the last time you compiled up kvasd for FreeBSD.
> No output except 0's.
By all means -- let me know how best to proceed!
If you remove
that call to flush, the O/S may decide to give you a list of decodes all
at once, at the end of the loop.
-- Joe, K1JT
On 10/17/2014 12:28 PM, Michael Black wrote:
> Well..yeah...speed..I would expect the "decode" phase to max out CPU until
> all deco
ressive optimization, compilers are free to reorder
> expressions where the Standard doesn't define a strict sequencing.
FWIW: With the original expressions in the code, gcc 4.8.1 ordered the
operations the "wrong"
ways the one at your selected Rx frequency. That's the
station you're working, and you want to see his message as soon as possible.
> That flush could be adding 10's of MS per decode.
I think a test will show you that this estimate is orders-of-magnitude
too lar
Hi Matthias,
You are correct that Omnirig.h is included not in the tarfile. It is
created during the build procedure using CMake.
If you need help in building WSJT-X, you might want to join the
wsjt-devel email list.
-- 73, Joe, K1JT
On 10/17/2014 1:58 PM, Matthias Buchwald wrote
brary. I suppose it should be something
like making a new SVN branch, say "packmsg", for the pack/unpack source
code, and having the relevant build scripts go there to build the
library. Does this sound right?
-- Joe, K1JT
-
#x27;s arrange to build the common library with CMake.
I had a brief try at using git-svn. I found it usable but not
immediately advantageous. Perhaps I would change my mind, in the
fullness of time. ;-)
-- Joe
--
. Received
signals in both modes continue to decode as usual.
If you think there is a bug, or some undesirable behavior, could you
please provide a recipe for reproducing the problem?
-- Joe, K1JT
--
Comprehensive
evision
control system can be a very useful model. I just decided that at
present, my time is better spent on other things than climbing the git
learning curve.
I may not be so good at walking and chewing gum at the same time.
-- Joe
--
1 - 100 of 1930 matches
Mail list logo
