sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>]
*Sent:*torstai 3. elokuuta 2023 22.16
*To:*WSJT software development <mailto:wsjt-devel@lists.sourceforge.net>>
*Cc:*Andreas Junge mailto:andr...@n6nu.org>>
*Subject:*Re: [wsjt-devel] #Echo Echo shifts TX frequency when
cl
m: Andreas Junge via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
> Sent: torstai 3. elokuuta 2023 22.16
> To: WSJT software development <mailto:wsjt-devel@lists.sourceforge.net>>
> Cc: Andreas Junge mailto:andr...@n6nu.org>>
> Subject: Re: [wsjt-devel] #Echo
via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Sent: torstai 3. elokuuta 2023 22.16
To: WSJT software development
Cc: Andreas Junge
Subject: Re: [wsjt-devel] #Echo Echo shifts TX frequency when clicking "Set RX
& TX offset" - should be disabled
Joe,
Yes, I have r
Hi Joe,
In that case shouldn’t be there an indicator as in the other modes on the wide
graph as to where the TX tone is? It looks more of a bug than a feature right
now.
The documentation let me to believe that the 1500Hz was an immovable object
when in Echo mode. :-) It isn't and I really
Hi Andreas,
On 8/3/2023 3:16 PM, Andreas Junge N6NU via wsjt-devel wrote:
It works fine when I right click on 1500Hz in the wide graphs or when
1500 was selected in the previous mode.
Yes. That's exactly what it's supposed to do.
We could, of course, force the TxFreq setting to 1500 Hz
I can duplicate the behavior here with my Apache 7000 and Thetis.
Using RC2 here.
Both the Tune button and Enable Tx follow the 500hz offsets.
Both Fake It and Rig Split behave this way.
Split=None works correctly.
Mike W9MDB
On Thursday, August 3, 2023 at 03:13:30 PM CDT, Andreas
Joe,
Yes, I have read it. I also read Bob's (KA1GT) article. Please have a look
at this short recorded screen session:
https://icecreamapps.com/v/fkkg3dt
Either right-clicking into the wide graph and setting the offset - which
should not work since it should be fixed to 1500- or by previously
Hi Andreas,
Have you read the full-length paper about Echo mode in WSJT-X 2.6.0 and
later? See item #34 in the list of WSJT-related references here:
https://wsjt.sourceforge.io/refs.html .
As described there, in Echo mode the transmitted audio-frequency tone
should always be 1500 Hz.
I posted my initial question on the groups.io list as well, but Charlie, DL3WDG
suggested to post it here as well.
This is reproducible. In Echo Mode right click in the Wide Graph and select
“Set RX & TX Offset” it seems to change the TX.
Steps:
- In the radio settings set "Split Mode" to