[XFree86] Odd behavior in Keyboard switching and CTRL modifier

Sorry if this is a re-post of the problem. I am using RedHat 9 + XFree4.3.0-2 + KDE 3.1-13 shipped with RH9. After upgrading my system (RedHat 8.0) to RedHat9. Everythings work fine without problem except that KDE misinterpret the symbols of my thai keyboard when pressing CTRL key. For exampl

[XFree86] Xfree86, ithoYpTXnylGXlZhcTkxrzLoFjBXvJkFerUcICaYblEYyEgBxr

tKbKOzTFGiUxRtokMWVYjTfEitZYPnqyatjOTevzmoWgxlqktm ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Not able to Start Any GUI (XServer/CDE)

On 11 Jun 2003, Vijay Kumar wrote: > (EE) Unable to locate/open config file /etc/X11/XF86Config-4 file is NOT found. Bcoz X is not yet configured in your system. So Configure it, by using redhat-config-xfree86 command (root permission is needed). Bye :) -- Bharathi S, IndLinuX Team, (__) DON

[XFree86] XFree86 and Radeon IGP-340M

Hi. I saw back in March that an experimental 2D XFree86 4.3.0 patch for the Radeon IGP sets was around, so I was wondering if those drivers have progressed in any way, and if even there is also 3D support. Thanks for the time ___ XFree86 mailing list [

Re: [XFree86] specific refresh rate

Billy Biggs wrote: Daniel Bush ([EMAIL PROTECTED]): I am using: XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) 1) How do I know exactly what refresh rate X is running @? It's a pretty easy. The bottom of this email contains a shell script. The formula is pixel clock in hz divide

Re: [XFree86] specific refresh rate

Daniel Bush ([EMAIL PROTECTED]): > I am using: > XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) > > 1) How do I know exactly what refresh rate X is running @? It's a pretty easy. The bottom of this email contains a shell script. The formula is pixel clock in hz divided by the number o

Re: [XFree86] X 4.3.0 fatal error [crash]

Are you sure it's not crashing when an OpenGL screensaver comes up? Mark. On Wed, 11 Jun 2003, Mukesh Rathor wrote: > > Hi, >In the hopes of trying to get my dual monitor work properly, I upgraded >to 4.3.0 and the darn thing backfired. The X server crashes ev

[XFree86] specific refresh rate

I am using: XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) 1) How do I know exactly what refresh rate X is running @? 2) How do I specifically set the refresh rate I want? I have examined my /var/log/XFree86.0.log and came across the following at the very end: GetModeLine - scrn: 0 clock:

[XFree86] X 4.3.0 fatal error [crash]

Hi, In the hopes of trying to get my dual monitor work properly, I upgraded to 4.3.0 and the darn thing backfired. The X server crashes everytime there's no activity, it's not crashed while I'm working. I alwasy come back to find it crashed. Any help is appreciated. Thanks, Mukesh

Re: [XFree86] Setting the colour of "white"

On Wed, 11 Jun 2003, Chris Simmonds wrote: > Hi, > > I have a need to re-define "white" on an X server to be some other > colour. I feel sure that it is a simple thing to do, but I can't quite > see how. > > Here are some details > > Xfree86 4.2.1 running on Linux 2.4.18 kernel > vesa driver

Re: [XFree86] problem: SAVAGE(0): Failed to fetch any BIOS modes.

On Wed, Jun 11, 2003 at 04:10:19PM +0200, Egbert Eich wrote: > you are using two different version of XFree86. I realize that--and I started to write that I am certain that the version I currently have was working before my crash, but now I've just concluded that this is probably wrong. The crash

[XFree86] Compiling XFree with BuildLowMem

Hi David, Thanks for your response, been looking at the wrong mailing list, the one at mail-archive.com doesn't seem to be updated regularly. Do you have an idea to get me started at how to look at what modules use the most memory? Commands, docs etc... My knowledge consists of top and mem. Doe

Re: [XFree86] Sol/Sparc: XLUT MapSbusMem failure

Unfortunately this patch produces the same effect. (After patching, I removed Sbus.o and re-ran make Everything.) xf86MapSbuMem still fails to map the XLUT region of memory. But thank you boatloads for trying. if you would like to me to try anything else, let me know (it's not important and I will

[XFree86] Setting the colour of "white"

Hi, I have a need to re-define "white" on an X server to be some other colour. I feel sure that it is a simple thing to do, but I can't quite see how. Here are some details Xfree86 4.2.1 running on Linux 2.4.18 kernel vesa driver LCD panel at 800x600x16 Although it is a full colour panel the a

[XFree86] Blank screen when switching of monitor

I have a linux box (Redhat 9.0) with a XFree86 4.3.0-2 on a ATI Radeon 7000 and 2 monitor (LCD+CRT). I configured X for dual head, all seems to be OK : The desktop icon on the CRT and the KDE toolbar on the LCD it's even possible to share a window between the two monitors. But ... ... when the m

[XFree86] Compiling XFree with BuildLowMem

Hi, I'm trying to compile XFree86 4.3.0.1 with #define BuildLowMem = YES as it seems to be a option for low memory machines. I'm trying to reduce memory consumption of XFree for a thinclient solution. When compiling the following error occurs + ln -s ../../../../programs/xmh/box6 . make[4]: *

Re: [XFree86] 6/10 aspect ratio

Your XF86Config specifies that your panel will only sync to 75.67 KHz horizontal syncs. I'm not sure what rounding and to what accuraccy the server makes checks against this, but it throws out all modes except for one due to that restriction. The panels are multisync and probably about 30-

[XFree86] error reported from X -configure ProSavageDDR KM266 graphics on compaq

Guys: Sorry to bug. bug... i've done the round trip, perhaps i'm a newbie idiot. but runing 4.2 redht. i hate redhat but need it for oracle stuff. I've got RedHat 2.1 AS. xfree default is 4.1.0.29 (i think?) Today upgrade xfree 4.2 XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window

[XFree86] 6/10 aspect ratio

I have an Inspiron 8500 and I'm trying to get x to change aspect ratios to better fit my lcd. Currently its running in 4/3 properly with no issues whatsoever. I'm using the stock nv driver in x 4.3.0. View my Config at: http://marley.bitstream.net/~hump/XF86Config.txt View my log at: http://mar

[XFree86] ati R250 9000 washed out color

Hi I have an ATI ALL-IN-WONDER Rv250 Radeon 9000 agp board on my system which is running RH 9.0 kernel 2.4.20. I have upgraded X to 4.3.0-13 and have been able to get X to run but the colors are all washed out. I cought a glimps of someone else having this problem but when I tried to find any

Re: [XFree86] Problem with PCI Geforce4 MX 440 and garbled sound(dual-head)

Which motherboard is this? It's probably a common problem on that motherboard and a google search may turn something up. Generally, these are caused by PCI disconnect interrupts. When data is sent to the card more quickly than it can deal with it, the card pulls itself off the bus and the

Re: [XFree86] Tracing .... ?

On Wed, 11 Jun 2003, Auge Mike wrote: > Hi all, > > I really want to know how can I trace or debug XFree86 drivers and library? > Is there any tools and utilities for that? > There's a gdb that's been hacked to support XFree86 loadable modules on ftp.xfree86.org in /pub/xpert/gdb

[XFree86] Not able to Start Any GUI (XServer/CDE)

Dear Sir After successfull installation of Redhat Linux 8.0 i tried to reboot. But i was not able to see any GUI coming. Manually i tried to run X Server , but i could not run it. The contents of the /var/log/XFree86.0.log are as follows ---

[XFree86] Problem installing Xvbf

I tried to install Xvbf inRedhat Linux 9.0, but error occured when try to install the xvbf. The error msg I getting are as follow: == Extracting /usr/local/src/Xvfb.tgz ==cannot handle file 'libc.so.6' with TLS data   You appear to have a termcap file: /etc/termcapThis should be edited manua

[XFree86] Bug report

Hallo. I have new Dell Latitude D-600 laptop. (VGA - ATI Radeon 9000 32MB) OS - FreeBSD 4.8 X - 4.3.0 (cvsupped - downloaded at 15:52 2003-06-11 compiled from port. The error has ocurred afrer configuring X by xf86cfg utility. Log is in attachement. My hardware (dmesg): Copyright (c) 1992-2003 Th

[XFree86] Problem with Radeon Mobility 9000

Hi, i have problems to config my X with xf86cfg on my notebook. Thanks -- Frank Rogall enigmatec GmbH Geschäftsführer Walter-Benjamin-Platz 6

Re: [XFree86] Compiling XFree with BuildLowMem

On Tue, Jun 10, 2003 at 11:24:50AM +1200, Miles Roper wrote: >Hi, > >I'm trying to compile XFree86 4.3.0.1 with > >#define BuildLowMem = YES > >as it seems to be a option for low memory machines. I'm trying to reduce >memory consumption of XFree for a thinclient solution. > >When compiling the fol

[XFree86] Tracing .... ?

Hi all, I really want to know how can I trace or debug XFree86 drivers and library? Is there any tools and utilities for that? Yours, _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/ju

Re: [XFree86] problem: SAVAGE(0): Failed to fetch any BIOS modes.

Andrew, you are using two different version of XFree86. The working configuration was from Version 4.2.1 the other one was Version 4.2.1.1 (Debian 4.2.1-6 20030225230350 [EMAIL PROTECTED]) (whatever that is). On the second one VBE isn't initialized when the driver tries to read the VESA BIOS mode

[XFree86] X server crashing when switching to console

Hello everybody! I've the following problem: My 4.3.0 X server often crashes when I'm switching from X server to console display (or after little time working in). Could somebody help me? I've read a lot of web pages, the whole this mailing list, no solution. Have somebody similar problem? Any id

[XFree86] Windows maximize on two screens

Hi, I have installed Redhat Linux 9.0 on a demo PC. That will be used for showing a monitor. The monitor AQU5611DTBK has a native resolution of 1840x2400. This is done through a dual DVI interface. The whole setup works like a charm now, so no problems there. There are just two minor issues. 1:

Re: [XFree86] Please teach me

On Wed, 11 Jun 2003, Tadayuki Tomita wrote: > I send the attached file. > Please teache me how to run the Xserver again Your font server has not been started, so X cannot find the 'fixed' (the default) font. Either start your font server (probably with `/etc/init.d/xfs start` ) or add some lines

RE: [XFree86] problem with var file + can't strart x

Try checking the permissions on your /var and /var/log/ directories and make sure that they allow write access, if they do they check the file(var/log/Xfree86.0.log) for the same. > -Original Message- > From: Kamil A'Shalwani [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June 10, 2003 6:15 P

RE: [XFree86] problem

You'll need to upgrade to 4.3. Your driver is too new for 4.1. -Original Message- From: HAMZA ZAHID [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 11, 2003 5:55 AM To: [EMAIL PROTECTED] Subject: [XFree86] problem ___ XFree86 mailing list [EMAIL

RE: [XFree86] Cannot Start X-Server

You haven't configured your X installation yet. "redhat-config-xfree86" is the command that you'll want to use for that. And no, you don't need to upgrade to redhat 9 to solve that particular problem. > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Wednesd

RE: [XFree86] Report Porblems

You need to upgrade to 4.3 your card isn't being recognized by that old version. Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org

RE: [XFree86] Please teach me

Your font server isn't running. This link has information on how to "fix" it. http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/ref-guide/s1-x-fonts.h tml The best solution would be to hard-code your paths in your config ("/etc/X11/XF86Config-4") file though add the following lines to the Fil

[XFree86] Problem with PCI Geforce4 MX 440 and garbled sound (dual-head)

I am running a dual-head system and I have a small problem with the sound related to the video cards. When sound is played on the AGP card there doesn't seem to be any problem at all, but when I watch a video, scroll on a web page, or open gnome-terminal and type on the pci card (the geforce 4) it

[XFree86] Please teach me

(B (B (B  (BHello, (BI am a enginner of Network and OS and Database. (BThe machine that was crashed X Server have been running (Bfor 3 month. (BBut It was crached when it is reboot. (BI cannot understand why it was crached. (B  (BI send the attached file. (BPlease teache me how to ru

[XFree86] Can't install over existing X!

I was having a horrid time with the source so I tried out the binaries. I did the Xinstall.sh -check and it told me: Checking which OS you're running... uname reports 'Linux' version '2.4.20', architecture 'i686'. Object format is 'ELF'. libc version is '6.3.2' (6.3). Binary distribution name is

[XFree86] problem

Protect your PC - Click here for McAfee.com VirusScan Online XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer th

[XFree86] Problem on redhat 7.3 an application in xterm larger than thescreen

sdw0.sdw Description: filename="text1.sdw"

[XFree86] Cannot Start X-Server

Hi, I have a video card Intel 82845G/GL. I am installing Red Hat Linux 8 on the system. But the X Server cannot start. The following is the log file: XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date:

Re: [XFree86] Problem with Radeon 9500 pro

Ok I tried vesa drivers and it works. For the failing  case, I was just launching the server x from tty1. thanks ! Cynthia Grossen a écrit: (II) Module shadowfb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II)