Question:
I have recently acquired an AIT Radeon
9000.
I am currently playing Morrowind, Elder Scrolls,
and a download site has a driver compatible with the 8500 (along with 7500, etc)
that has 1280 x 960 default graphics.
Should I load this thing in? Will it go with
my 9000?
I am
On Monday 23 December 2002 2:23 am, noname nolastname wrote:
> Hello,
> could somebody tell why I am unable to get all the events from all
> xclients. For example I can't get (KeyPress,MotionNotify,...) events from
> mozilla window in X, why?. Are there any other posibilities to block event
> se
Hello,
could somebody tell why I am unable to get all the events from all xclients.
For example I can't get (KeyPress,MotionNotify,...) events from mozilla
window in X, why?. Are there any other posibilities to block event sending to
other xclients except setting "do_not_propagate" bit mask??
Title: i845G (was RE: [Xpert](no subject))
Red Hat 7.2 is coming with X4.1 which is some 2 years old now.
The 845 G* chipsets are quite new (some 6 months i think).
Please imagine that you cant expect drivers coming with
a CD for a hardware that did not exist at all when the
CD was
On Thu, 5 Dec 2002, kaustav neogy wrote:
[very rough descr. of system - X configurator don't work]
issue "lspci" or "cat /proc/pci" on the command line, find your video card
there and then go to http://google.com and enter
"the_name_of_your_gfx_card linux".
*t
--
Hi,
I've got a new system. Its configuration is PIV 2.4 GHz, 128 DDR RAM, Intel
845 GVAD MB with onboard display and sound. I have installed Red Hat 7.2 and
its booting perfect. However, I am unable to configure the display and hence
can't use the Graphical interface. I tried to run the X config
confirm 264693
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
I need to know in the X11R6 dir where the microtouch and elotouch screen
drivers are and if anyone know where they ar eand what they are named in the
source code ?
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
does anyone know where in the x src code the elotouch and micro touch code are
uncompiled
?
I need to see the command set. for elo and microtouch.
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On Thursday 15 August 2002 10:36 pm, Tran Hong Son wrote:
> When I tried installing X Window with framebuffer mode (redefine in
> grub.conf and XF86Config, creat X link to XFree86-FBDev) when running X, I
> receive these messages:
> "Fatal sever error.
> open-framebuffer: failed to open /dev/fb0 (
When I tried installing X Window with framebuffer
mode (redefine in grub.conf and XF86Config, creat X link to
XFree86-FBDev)
when running X, I receive these
messages:
"Fatal sever error.
open-framebuffer: failed to open /dev/fb0 (No
such device)"
Help me troubleshoot
it
On Thu, 1 Aug 2002, aydini wrote:
>
> How can get overlay transparent and underlay window together ?
> And is there any screen recorder in real time on UNIX ?
> thanks
You want a screenshot with both layers? XFree86 doesn't have
a way to do that. SGI had an extension to do that - it
How can get overlay transparent and underlay window together ?
And is there any screen recorder in real time on UNIX ?
thanks
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On Wed, 31 Jul 2002, Toshinao Ishii wrote:
> Subject: Re: [Xpert]XvShmPutImage() memory leak ?
> --text follows this line--
> Tue, 30 Jul 2002, Mark Vojkovich wrote:
>
> > XvShmPutImage doesn't allocate any memory.
>
> Yes. We can find this in the source.
>
> On the other hand, when I comment
Subject: Re: [Xpert]XvShmPutImage() memory leak ?
--text follows this line--
Tue, 30 Jul 2002, Mark Vojkovich wrote:
> XvShmPutImage doesn't allocate any memory.
Yes. We can find this in the source.
On the other hand, when I comment out the call
XvShmPutImage(dpy, xv_port, window, gc, yuv_
Hello everyone. This is my first mail on this list.
I'm trying to get a graphical login to a SUN workstation(running dtlogin as
it's login manager) from a L-M 8.1 box.
On the L-M 8.1 box I set xhost + in an xterm running on :0
Then I use
X :1 -query
I get the following error and the X server q
On Mon, 15 Jul 2002, Hui Zhang wrote:
> Hello everyone,
>
> I don't know if it's the right place to ask such a question.
> Actually,I am a newbie to linux. I got a problem when I am
> updating my redhat from 6.2 to 7.3. After the update, I cannot
> start the Xwindows. I got "fatal IO error 104
Hello everyone,
I don't know if it's the right place to ask such a question.
Actually,I am a newbie to linux. I got a problem when I am
updating my redhat from 6.2 to 7.3. After the update, I cannot
start the Xwindows. I got "fatal IO error 104" every time
when I try to do that. Can anybody giv
confirm 117412
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
Yello
I have a Apple Powerbook 3400 which lacks the Home, end, insert, delete,
pageup/down keys. Is there anyway to emulate the pageup/down keys?.
I had some succes with:
xmodmap -e "clear mod3"
xmodmap -e "keycode 115 = Mode_switch"
xmodmap -e "add mod3 = Mode_switch"
xmodmap -e "keycode
On 10 May 2002, Mike wrote:
>>As a general guideline of what is realistically possible with
>>such hardware, one might try Windows, and see what 3D video
>>modes are available on these cards in Windows while running a 3D
>>game. Whatever windows can do with the 3Dfx drivers, it is
>>theoreti
I have a Suse 7.2 installation and have Trident ALaddin card. However I am
not able to use yast2. It gives me the following errors:
Qt: Locales not supported on X server
/usr/lib/YaST2/bin/y2bignfat get_modulesdata qt -T
Qt: Locales not supported on X server
eof
and doesn't show the buttons fo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have an IBM A30P. I have been trying for sometime to
get xdm working. I have tried to Build Xfree86 from source and I
could startx but no xdm. I now am running the most current OpenBSD
binary snapshot. I believe this has the neces
hallo Xperts
i recently bought an adapter to connect my ps2 intellimouse on the serial
port of my old pc. problem is nothing seems to work harware search doesn't
recognise the mouse. Any ideas how i can configure the serial port to take
this mouse?. hope you can help, thanks for u'r time.
brianov
i am sending this to both the expert and newbie lists.
The log and config files can be found at the following addresses:
http://members.aol.com/boylenate/XFree86.log.txt
http://members.aol.com/boylenate/XF86Config.txt
Every single time I type "startx", it seems to load fine until "just" before
On Mon, 18 Feb 2002, Victor Li wrote:
> Dear all,
> I 've recently installed redhat 7.2 on my laptop
> (Toshiba Satellite 3000-353, with Gforce 2--16M).
> however, I can't get X windows displayed on my laptop
> monitor, but it is fine on my external monitor which
> is Compaq V75. anyone has a clu
Dear all,
I 've recently installed redhat 7.2 on my laptop
(Toshiba Satellite 3000-353, with Gforce 2--16M).
however, I can't get X windows displayed on my laptop
monitor, but it is fine on my external monitor which
is Compaq V75. anyone has a clue? many thanks!!!
Vic Li
=
Yu Vic Li
Lady Mar
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Xpert]Matrox G450 X server crashes
References: <[EMAIL PROTECTED]>
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
From: Thomas Steffen <[EMAIL PROTECTED]>
Organization: Ruhr-Universitaet Bochum
Date: 22 Jan 2002 15:23:16 +01
On 15 Jan 2002, Thomas Steffen wrote:
> Yuri van Oers <[EMAIL PROTECTED]> writes:
>
> >>> * Does this problem have to do with the fact that, one of the
> >>>video-cards is a motherboard-built-in Video card ? Does the scenario
> >>>change, when the 2 video-cards are add-on cards ?
> >>
Yuri van Oers <[EMAIL PROTECTED]> writes:
>>> * Does this problem have to do with the fact that, one of the
>>>video-cards is a motherboard-built-in Video card ? Does the scenario
>>>change, when the 2 video-cards are add-on cards ?
>>
>> Shouldn't matter.
>
> Most BIOSes I've seen d
On 15 Jan 2002, Thomas Steffen wrote:
> "SHOBHIT MATHUR" <[EMAIL PROTECTED]> writes:
>
> > * Does this problem have to do with the fact that, one of the
> >video-cards is a motherboard-built-in Video card ? Does the scenario
> >change, when the 2 video-cards are add-on cards ?
>
> Sh
"SHOBHIT MATHUR" <[EMAIL PROTECTED]> writes:
> * The PC is an AcerPower S Series
Might be a problem. Acer is well known for producing not quite so
compatible solutions and withholding the specs. If you can, try a
different board, just to check this out.
> * The 2 Video cards are :
Hello All,
I do not belong to this mailing-list and am not a subscriber.
I am writing this mail to you all, to get some suggestions for
the solution of a persistent problem that I have been facing
for quite some time due to which, I have not been able to setup
Hello All,
I do not belong to this mailing-list and am not a subscriber.
I am writing this mail to you all, to get some suggestions for
the solution of a persistent problem that I have been facing
for quite some time due to which, I have not been able to setup
A _work-in-progress_ driver can be found at:
http://www.webit.com/tw/linuxsis630.shtml
If I'm corrent it is not yet in the XFree CVS.
btw: you should give your mails a usefull subject ...
From: Ulrich Schwenk <[EMAIL PROTECTED]>
Subject: [Xpert](no subject)
Date: Tue, 15 Jan 20
Hi.
In the archives (december) I noticed some people discussing problems with
SiS630 chipsets and LCD-Displays.
I have a Sis630 in my laptop and I also ran in problems with Xfree86: The
display is black with only some colorful spots on it. Then it get's brighter
until it's white.
That happens w
On Sun, 13 Jan 2002, Steve Wingate wrote:
> Anyone managed to get an ATI Xpert98 (PCI) to do 1600x1200 at 24-bit
> color? I can only get it run 1600x1200 at 16-bit, even though the
> hardware should support it. The card has 8MB RAM and should do
> 1600x1200@75hz @ 16 million colors. The monitor i
Anyone managed to get an ATI Xpert98 (PCI) to do 1600x1200 at 24-bit
color? I can only get it run 1600x1200 at 16-bit, even though the
hardware should support it. The card has 8MB RAM and should do
1600x1200@75hz @ 16 million colors. The monitor is a Viewsonic PF790
which should do 1600x01200@77hz
Hi,
I´ve got a Toshiba Satellite 1805-S254 with the same Trident Cyber
Aladdin-T video adapter this week.
I was looking for a way to configure XFree86 with Linux on the web, and
found your questions.
I found my answer at:
http://www.cs.helsinki.fi/linux/portege4000.html (thanks Jani - if I
s
Ling ChenTvia,Inc.Hefei office Software
department.
do you have drivers for the ATI rage mobility 128 graphics card for Linux
(SuSE)? I have a laptop from Dell that I'm trying to get the video to work
properly.
Dan
Dan Young
Sr. Oracle DBA
Certified Oracle Professional
(w) 303.386.1306
Array BioPharma, Inc.
___
Hi:
I have a Linux RedHat 7.1 with Xfree 4.03 and a trident
9680 vga card with 1mb ram and I am using it at 8000x600@60hz. The mouse pointer
looks allright and it points to to the right place (according to the mouse
things are where they have to be and if I point the lower right part of the
On Tue, 11 Dec 2001, Bhaswati Mookerjea wrote:
> Hi,
>
> How do I get the latest version of X (4.1.0-99?) from the CVS repository?
>
http://www.xfree86.org/cvs/
Don't use a branch tag and you get latest CVS.
Mark.
___
X
Hi,
How do I get the latest version of X (4.1.0-99?) from the CVS repository?
Mookerjea
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
Hi there,
I have recently bought a Toshiba Satellite 1800-S204 laptop that comes
with a `trident cyberbladeXPAi1' card. I installed RedHat 7.0 that came
with XFree86-4.0.1 and it did not recognize the card. I upgraded to
XFree86-4.1.0 but no improvement. Since I noticed that support for
this ca
* Peter Rader ([EMAIL PROTECTED]) wrote:
> Hello,
> i have a question: Does Xfree go compatible to Multimonitoring?
You can use XFree on a machine with multiple monitors either as separate
displays or one combined big display.
Dave
Have a happy GNU millennium! -
Hello,i have a question: Does
Xfree go compatible to Multimonitoring?
Hello,
Is Trident Cyber ALADDiN-T (Nappa2-T) going to be supported by XF86 4.2.0?
I have Toshiba Satellite 1800-814 and I am unable to set the xdisplay on
it.
Thanks,
Bhaswati Mookerjea
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mail
On Mon, 12 Nov 2001, Thruput Ltd wrote:
> Dear Sirs,
>
> Has anybody written a X windows driver that converts 8 bit pseudocolor visuals into
>24 trucolor?
>
> This is the problem
>
> "what we need is having two different pseudo color 8 bits visuals, we
> will call "standard" and "underlay".
Dear Sirs,
Has anybody written a X windows driver that converts 8 bit pseudocolor visuals into 24
trucolor?
This is the problem
"what we need is having two different pseudo color 8 bits visuals, we
will call "standard" and "underlay". in both visuals we have several
windows and colormaps and
On Mon, 29 Oct 2001, Donald Tournier wrote:
>
> Thanks for your help, everyone. As suggested, I tried both the XFree86
> supplied nv driver and the NVidia supplied one (version 1.0-1541), and
> neither work. Andrew Aitchison seems to suggest that Pseudocolor apps
> need to have the Pseudocolor vi
On Mon, 29 Oct 2001, Donald Tournier wrote:
> 3. Run a second X server at 8bpp. I understand this to mean: get another
> graphics card & monitor, and run X at 8bpp on that. I have a monitor that
> will switch between two inputs, so that might help. But it's still a
> rather cumbersome options - e
Thanks for your help, everyone. As suggested, I tried both the XFree86
supplied nv driver and the NVidia supplied one (version 1.0-1541), and
neither work. Andrew Aitchison seems to suggest that Pseudocolor apps
need to have the Pseudocolor visual as the default; does this means that
even if Pseu
On Fri, 26 Oct 2001, Donald Tournier wrote:
>
> Hi!
>
> I need to run various apps which require different bit depths. In
> particular, one application only runs at 8 or 24 bpp, and the other only
> runs on an 8 plane pseudocolor visual. I am happy setting the display at
> 24 bpp, but setting i
On 26 October 2001, Donald Tournier said:
> I need to run various apps which require different bit depths. In
> particular, one application only runs at 8 or 24 bpp, and the other only
> runs on an 8 plane pseudocolor visual. I am happy setting the display at
> 24 bpp, but setting it to 8bpp just
On Fri, 26 Oct 2001, Donald Tournier wrote:
> I need to run various apps which require different bit depths. In
> particular, one application only runs at 8 or 24 bpp, and the other only
> runs on an 8 plane pseudocolor visual. I am happy setting the display at
> 24 bpp, but setting it to 8bpp ju
Hi!
I need to run various apps which require different bit depths. In
particular, one application only runs at 8 or 24 bpp, and the other only
runs on an 8 plane pseudocolor visual. I am happy setting the display at
24 bpp, but setting it to 8bpp just looks horrible. Why is not possible
for XFre
On Thu, 20 Sep 2001, Alex Deucher wrote:
> Is there support for the matrox G550 in Xfree CVS?
If it isn't there yet, it soon will be.
Matrox have written a patch, it just needs to make its way into
the CVS system.
--
Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge
[EMAIL PRO
Is there support for the matrox G550 in Xfree CVS? My
G400 just died, and I replaced it with a G550. Matrox
included binary drivers and
source code that adds support for the G550 on the
install CD. I was wondering if this has been added to
your CVS. I'm using the matrox binary at the
moment, b
60 matches
Mail list logo