[EMAIL PROTECTED] (James A. Crippen) scribbled:
Jens Owen [EMAIL PROTECTED] writes:
[EMAIL PROTECTED] wrote:
The general answer is, the usual, it depends. The documentation
for different extensions is in different places, if it exists at
all.
Should we consider putting
On Sun, 23 Jun 2002, Jason Craddock wrote:
Can someone please unsubscribe Jason here, so we don't receive a
vacation bounce every time someone posts a message? It would be
much appreciated. I've got 12 or so vacation messages in my
xpert folder currently in 2-3 days.
TTYL
Date: Sun, 23
On Sun, 23 Jun 2002, David D. Hagood wrote:
My questions are:
1) How can I get symbols loaded on the drivers, so that I can debug this
in a civilized fashion? Do I need to build the Radeon driver into X
(i.e. is the module load process stripping the symbol data)?
Install the XFree86 src.rpm,
This message has been automatically generated.
Jason will be out of the office from June 24th through July 1st.
If you need immediate assistance please contact Alisa Ott at
[EMAIL PROTECTED] or by calling 801-225-6080.
Thank you,
Jason Craddock
[EMAIL PROTECTED] 06/24/02 00:26
Send Xpert
kiss the sun and walk on air writes:
Thanks for trying :) Perhaps we can try pushing the value beyond the
spec? Or is there possibly something in the modeline that could be
tweaked?
Well I found a bug in my code - however this shouldn't have affected
the -2 case. No, unfortunately one
Please, please help! I am at my wits end, and I
*really* need to get my *nix environment back to get
back to work! I apologize in advance if this is the
wrong forum, but I thought it appropriate considering
that the problem persists on both the non-free NVidia
driver and the plain old SVGA
--- Ray Skoog [EMAIL PROTECTED] wrote:
Need to get back to work? Go get a new video card.
Could easily cost
you less than 5 hours of wages for a card better
than a GeForce2mx, and
thats not even getting paid much.
That assumes the card is your problem of course.
Maybe you should
On Mon, 24 Jun 2002, Dave Fletcher wrote:
I don't know if this helps, but may as well describe
the crash itself. On an init 5 in redhat 7.2, the
system freezes almost instantly. I can sometimes type
in a few characters of my login, and then I get pixel
garbage and hard lockup. On mandrake
On Sun, Jun 23, 2002 at 11:08:37AM +0200, Egbert Eich wrote:
Alan Hourihane writes:
Just checked, and it's still the same for the XP series.
Well, then I'm out of ideas. I'd need a box with a 1400 wide display
for testing.
Is there anything at all I can do to help facilitate
Can someone un-subscribe Jason Craddock ([EMAIL PROTECTED]) until he
gets an out of office responder that isn't broken?
TIA
Hamish.
--
I don't suffer from Insanity... | Linux User #16396
I enjoy every minute of it... |
|
--- Dr Andrew C Aitchison
[EMAIL PROTECTED] wrote:
Did you add a new disk ?
I'm wondering if you have some sort of conflict
(interrupts?)
between the new disk and the graphics card ?
Hmm, no... just swapped functionality of the disks
already in the system. HD 1 now runs Windows
exclusively.
Hi all:
I am a newbie for XFREE86 programming, now I am doing something with
XFree86 in my project(software design recovery)... Can someone give me some
hints to start my XFree programming career :) .
Here is what I need to do, it sounds simple..
I run an application, this
On 23 Jun 2002, Michel Dänzer wrote:
On Fri, 2002-06-21 at 20:59, Zhicong Liang wrote:
Thanks it works, but one more question. Where can I get the document for
these Option setting for XConfigure??
They should be documented in the driver manpage, unfortunately the
radeon driver doesn't
I seem to have fixed the problem, and I have no idea
why it works. There is a setting in my system bios
called CPU Hardwired IOQ. There are 2 settings, 1
level and 4 level. The default (even in fail-safe bios
defaults!) is 4 level... the motherboard manual says
that 1 level is more stable. I had
This message has been automatically generated.
Jason will be out of the office from June 24th through July 1st.
If you need immediate assistance please contact Alisa Ott at
[EMAIL PROTECTED] or by calling 801-225-6080.
Thank you,
Jason Craddock
[EMAIL PROTECTED] 06/24/02 08:25
Send Xpert
On 23 Jun, [EMAIL PROTECTED] wrote:
The minimum realistic requirement for medical work is a high quality
monitor and a 10-bit DAC. This lets you adjust the output LUT so that
you can comply with the display standard while using 8-bit data.
Assuming that there is compliance with the CPI
On Tue, Jun 18, 2002 at 01:32:11PM +0200, Olivier Chapuis wrote:
Hello,
It seems that XCreateFontSet leads to memory leak (or I totally
miss something).
Each time I load a font with XCreateFontSet and free it with
XFreeFontSet the memory used by my (test) program grow: around
4.4 Kb at
On Sat, 2002-06-22 at 21:38, Skip Gaede wrote:
I have a Mac client that's running XFree86 (4.2.0) -query +
Mozilla and losing lots of size-2048 buffers. The rate loss
is approximately 1000 buffers/hour. I'm seeing this loss of
memory after I boot with an initrd, get an IP address with
[This is from [EMAIL PROTECTED] -- new subscriber]
Hello -- I have had zero success getting 4.1 or 4.2 to
work although 3.3.6 works perfectly on the same machine.
Some fairly heavy hitters have worked on this already
with no success. There is NO CONSOLE and NO X DISPLAY.
Please refer
I'm having a problem with my Xserver that I have never seen before. I
have been running Xfree86 happily on my X86 Linux box (Red Hat 7.2/KDE)
for about a year now, with no problems, and the other day I suddenly
started getting the following error message when booting up:
-
I've been trying to get X-Video support working for the Radeon 8500.
Although there were some changes made to the Radeon driver in CVS
early this month, as of a 2002-06-23 CVS checkout, X-Video support
still doesn't work: applications that try to use it just display a
black area.
Since I'm
On June 24, 2002 03:31 pm, John Herrington wrote about [Xpert]linux font path error:
I'm having a problem with my Xserver that I have never seen before. I
have been running Xfree86 happily on my X86 Linux box (Red Hat 7.2/KDE)
for about a year now, with no problems, and the other day I
From [EMAIL PROTECTED] Fri Jun 21 14:24:21 2002
From: Dr Andrew C Aitchison [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Xpert] unresolved symbols with ATI Radeon Mobility M6 LY
Date: Fri, 21 Jun 2002 11:45:09 +0100 (BST)
On Thu, 20 Jun 2002, Eric SERVANT wrote:
Hi
Hi all,
I have tried to install Redhat Linux 7.2, 7.3, and Mandrake 8.2 w/
XFree86
4.2 onto my Compaq Presario 2800 laptop. During the installation, I got
no
problem with the screen, but after the installation, from the graphical
login screen and onwards, the screen got screwed up. There are
Hey, first of all, is this the correct mailing-list for help on modifying
the xkb symbols files?
I am trying to add the faeroese language to X (it's almost similar to that
of dk, so I just did a cp of of /etc/X11/xkb/symbols/dk fo and nano'ed it.
I've figured out how to change the normal
Hi all,
I have tried to install Redhat Linux 7.2, 7.3, and Mandrake 8.2 w/
XFree86 4.2 onto my Compaq Presario 2800 laptop. During the
installation, I got no problem with the screen, but after the
installation, from the graphical login screen and onwards, the screen
got screwed up. There are
Hello !
I'm using XFree 4.2 and kernel 2.2.18 on an Athlon 700MHz (Slot A),
ASUS K7M Mainboard. My graphic card is a ATI Rage 128 RF (AGP), Chip ID 0x5246.
Often when I use picture editors (e.g. gimp 1.2) and scroll the image up/down with
the vertical scrollbar I got an error message in the
Hi all,
I have tried to install Redhat Linux 7.2, 7.3, and Mandrake 8.2 w/
XFree86 4.2 onto my Compaq Presario 2800 laptop. During the
installation, I got no problem with the screen, but after the
installation, from the graphical login screen and onwards, the screen
got screwed up. There are
[Please CC any replies to me, since I am not subscribed to the list.]
Hello,
I am using a SONY SDM-M81 LCD panel together with a Radeon 8500 DDR card in
1280x1024 24bpp mode. My XFree86 is version 4.2.0.
My problem is that when I display a color gradient like the following one:
Hi-
I have an HP 5430 laptop with the Cyberblade XP graphics chipset and an
s-video out port. After reading various How-To's, I'm still confused as to
how to enable viewing of DVD's onto the TV through this S-video port. I
have been using Mplayer to view the DVD on Redhat 7.3.
Is the S-video
David D. Hagood wrote:
I've come across a weird problem in the Radeon drivers in 4.2 -
depending upon the horizontal scan rates I specify for my monitor, I can
cause a divide by zero within the Radeon init code.
You might be better off posting this problem on the Xpert (XFree86) mailing
Hello,
question to the Xperts:
my system is an
ASUS A7V 266 E with 256 MB DDR RAM
AMD t-bird 1.333 GH
MSI 8851 (GeForce3 TI200 based)
Debian Linux with kernel 2.4.18
XFree86 4.2.0 binary release
with nvidia drivers (kernel module + GLX) 1.0-2960
NO overclocking.
I see random false triangles
I've been trying to get X-Video support working for the Radeon 8500.
Although there were some changes made to the Radeon driver in CVS
early this month, as of a 2002-06-23 CVS checkout, X-Video support
still doesn't work: applications that try to use it just display a
black area.
Since I'm
Found out something NEW
First I went back and reinstalled mdk 8.2 with X 3.3.6 so
I would have something to login to. I then reinstalled the
2960 drivers to guarantee that they matched the kernel
version (rather than booting from the CD which is a
different version). Then I updated mdk 8.2
On Fri, 21 Jun 2002, Lukas Molzberger wrote:
Hello,
I'm using Linux and XFree for quite some time now and I'm a big fan of it.
However, there is one bug that has always annoyed me. When I resize a window
under XFree then it can take a long time until the content of this window is
This isn't exactly what you're looking for, but it might still work for
you.. Take a look at the site
http://www.warpedsystems.sk.ca/article.php?sid=475mode=threadorder=0
Good luck..
Ronald
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of dP
Sent:
1) What do I need to do to make available to a non-root user. I've already
added that user to the group kmem, but that has had no effect. What do I need
to do?
2) If I'm running a DGA application and it stops working, is there any way
for me to safely get back out to X or to the shell?
37 matches
Mail list logo
