On Sat, Mar 28, 2009 at 6:57 PM, Ian Collins wrote:
> Please stop top-posting to threads where everyone else is normal-posting, it
> mucks up the flow of the thread.
>
> Thanks,
>
> --
> Ian.
Apologies - top-posting seems to be the Gmail default (or I set it so
long ago that I forgot it was there
Harry Putnam writes:
> I've already bought a sil3114 chip card off ebay ($20 us) yesterday so
> I'll see how I fare on that first. I'm told it will recognize sata II
> if you flash it to latest bios update. I'm not sure but that may also
> be possible with the card I'm having the trouble with.
Frank Middleton writes:
> It's even worse if you have an old SPARC system. We've had great results
> with some LSI LOGIC SAS3041XL-S cards we got on E-Bay in conjunction
> with 3x1.5TB Seagate drives, for 2.7TiB of raidz. The combination proved
> faster than mirrored 10,000 RPM SCSI disks using U
On 03/28/09 20:01, Harry Putnam wrote:
Finding a sataII card is proving to be very difficult. The reason is
that I only have PCI no PCI express. I haven't see a single one
listed as SATAII compatible and have spent a bit time googling.
It's even worse if you have an old SPARC system. We've h
Ian Collins writes:
> Harry Putnam wrote:
>>
>> I'm starting to think I may have just got the wrong card and should
>> just throw in the towel and get something known to work with my
>> hardware.
>>
>>
> That sounds like a good plan!
>
> Using older SATA controllers with SATA II drives may wor
Harry Putnam wrote:
I'm starting to think I may have just got the wrong card and should
just throw in the towel and get something known to work with my
hardware.
That sounds like a good plan!
Using older SATA controllers with SATA II drives may work, but there
aren't any guarantees.
--
Blake wrote:
Have you checked the specs of the 1205 to see what maximum drive size
it supports? That's an older card, IIRC, so it might top out at 500gb
or something.
Please stop top-posting to threads where everyone else is
normal-posting, it mucks up the flow of the thread.
Thanks,
--
casper@sun.com writes:
>>I mentioned that pressing F3 doesn't do anything. That is, I have
>>now way to enter the configuration tool.
>
>
> Does it work when you first remove the 200GB drive, reboot, press F3
> and see what you can do in that configuration tool.
>
> It is possible that it fir
Blake writes:
> what's the output of 'fmadm faulty'?
It hangs for maybe 30 seconds, then returns the prompt.
And again now on this boot, before the console prompt appears I see:
ata_id_common: Busy Status 0xfe error 0x0
Repeated 4 times.
And again, the console prompt is barely usable.
log
what's the output of 'fmadm faulty'?
On Sat, Mar 28, 2009 at 12:22 PM, Harry Putnam wrote:
> Harry Putnam writes:
>
>> Once booted up I see the recurring message where I should see a login
>> prompt (I'm setup to boot into console mode).
>>
>> ata_id_common Busy Status 0xfe error 0x0
>>
>> Rep
Harry Putnam writes:
> Once booted up I see the recurring message where I should see a login
> prompt (I'm setup to boot into console mode).
>
> ata_id_common Busy Status 0xfe error 0x0
>
> Repeated 4 times, then after maybe a 2-3 minute wait the regular login
> prompt appears.
>
> There is s
Blake writes:
> Have you checked the specs of the 1205 to see what maximum drive size
> it supports? That's an older card, IIRC, so it might top out at 500gb
> or something.
I did yes, all it really says is that is supports drives larger than
137gb.
http://www.adaptec.com/en-US/support/sata
Have you checked the specs of the 1205 to see what maximum drive size
it supports? That's an older card, IIRC, so it might top out at 500gb
or something.
On Sat, Mar 28, 2009 at 10:33 AM, Harry Putnam wrote:
> casper@sun.com writes:
>
>>>I mentioned that pressing F3 doesn't do anything. Tha
casper@sun.com writes:
>>I mentioned that pressing F3 doesn't do anything. That is, I have
>>now way to enter the configuration tool.
>
>
> Does it work when you first remove the 200GB drive, reboot, press F3
> and see what you can do in that configuration tool.
>
> It is possible that it fir
casper@sun.com writes:
> Does it work when you first remove the 200GB drive, reboot, press F3
> and see what you can do in that configuration tool.
> It is possible that it first needs to forget the 200GB drive.
Might be the way. Seems likely given the way you've shown how zfs can
remembe
>I mentioned that pressing F3 doesn't do anything. That is, I have
>now way to enter the configuration tool.
Does it work when you first remove the 200GB drive, reboot, press F3
and see what you can do in that configuration tool.
It is possible that it first needs to forget the 200GB drive.
Harry wrote:
>> However I hit a snag right away. Pulled a 200gb added a 750 but on
>> boot when I get to that screen I see:
>>
>>Press F3 to enter configuration utility
>>Primary channel: WDC WD200-blah-blah 190782 MB
>> Primary secondary: WDC WD750-blah-blah
>>
>> Note the
Harry Putnam wrote:
Setup: Osol.11 build 109
Athlon64 3400+ Aopen AK-86L mobo
adeptec 1250sa Sata PCI controller card
[re-posted from accidental post to osol `general' group]
I'm having trouble with an adaptec 1205sa (non-raid) SATA PCI card.
It was all working fine when I plugged 2 used sata
Setup: Osol.11 build 109
Athlon64 3400+ Aopen AK-86L mobo
adeptec 1250sa Sata PCI controller card
[re-posted from accidental post to osol `general' group]
I'm having trouble with an adaptec 1205sa (non-raid) SATA PCI card.
It was all working fine when I plugged 2 used sata 200gb disks of a
windo
19 matches
Mail list logo
