Re: ShopTalk: PING Re-shaft

[llits1930]

Graham: I've done dozens of Ping reshafts and have always used a good shaft puller and never had a problem with the ball bearing. I have read many shoptalk messages about drilling a hole in the ball bearing from the sole of the putter but I have never once had a problem when using a good shaft puller, the bearing comes right out with the shaft. As you are aware the ball bearing is inserted to lock the shaft in place in the hosel but the shaft surface is resting on the inside surface of the hosel and therfore rides right out with the shaft or at least that has been my experiance. HStill    ----- Original Message ----- From: Graham Little Sent: Monday, December 30, 2002 7:22 AM To: [EMAIL PROTECTED] Subject: ShopTalk: PING Re-shaft   I've got a B61 PING putter coming in for a reshaft and I've never done one before. I seem to recall some problems relating to a ball bearing in the shaft that makes them difficult to take out. Anything else to watch out for?   Cheers Graham