Re: ShopTalk: FUJIKURA RESHAFT

[ontargetgolf]

I know I'm not going to smash the tip end, it's the area about 4" to 6" up that I worry about. That's roughly 1 1/2" of tip in the hosel + the 2" PVC sleeve above the hosel + the 3" section that being clamped. Am I still safe? Pat McGoldrick--On Target Golf [EMAIL PROTECTED] ----- Original Message ----- From: Al Taylor To: [EMAIL PROTECTED] Sent: Wednesday, September 24, 2003 10:45 PM Subject: Re: ShopTalk: FUJIKURA RESHAFT Pat, Take an old take out or cut off shaft (tip end) and put it in your puller as if being pulled.  Now crank down on it.  No harder.  Noooo I mean real hard!  Let me know if you crushed the shaft. Al At 10:02 PM 9/24/2003, you wrote: $10 to pull and save the shaft? I just finished pulling the head and I have to tell you that ranks up there with the 975's as one of the most difficult heads to pull. I am still having problems with the shaft slipping through the rubber clamp on Kennedy's puller. I guess I just don't have enough confidence to apply the pressure needed without the fear of smashing the shaft. $110 sounds reasonable enough. Thanks for your quick responses. Pat McGoldrick--On Target Golf [EMAIL PROTECTED]   --- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, September 24, 2003 8:55 PM Subject: Re: ShopTalk: FUJIKURA RESHAFT In a message dated 9/24/03 4:03:03 PM Pacific Daylight Time, [EMAIL PROTECTED] writes: I have a customer that wants his GBB II reshafted with a Vista Pro 60 shaft, could someone give me some kind of indication of the going rate for a reshaft with this shaft? This will be my first reshaft of the GBB II and my first experience with any Fujikura shaft. TIA Pat McGoldrick--On Target Golf [EMAIL PROTECTED] Hi Pat, I charge $10.00 for the pull, $70.00 for the shaft, $19.00 on the build including spineing and flowing, and $10.00 on the bore thru, so that's $109.00, if they just want it stuck with the logo up or down without spineing and flowing the build is $9.00 instead of $19.00. David