|
Has anyone done any repairs on the Lynx Black
Cat irons w/ the Dynamic Flare tip shafts? A customer has brought in a 3I
to reinstall the head back onto the shaft, and the 4I shaft without the
head, (it has flew off and into the pond in front of him). Questions I have are
1- the 4I shaft has a tapered ferrule on the tip of the shaft and the 3I shafts
does not. Do I need to pull that ferrule (or sleeve) off the 4I shaft to use to
reinstall the 3I head or could I somehow shim the tip of the 3I shaft to make
the head fit snug? The taper measurements are .365" up to .423". 2- Does
anyone have or know where I could get a replacement 4I L/H head or if I need to
make him a new 4I,something similar to match his set? I have called the club scouter and club finder
recourses, with no luck. As always, TIA. For those who have responded to some of
my questions in the past, I apologize if I never get back to you with a thank
you, as my life requires more than 24 hrs. in a
day.
Pat-On Target Golf
[EMAIL PROTECTED] |
BEGIN:VCARD VERSION:2.1 N:McGoldrick;Pat FN:Pat McGoldrick ORG:ON TARGET GOLF TITLE:Professional clubmaker NOTE;ENCODING=QUOTED-PRINTABLE:Swing speed-Driver=3D96 mph, 5Iron=3D80 mph @ Dynacraft March 2002, lie angl= e=3D 2* more upright @ 38" 5Iron, Launch Angle 14-16* Spin Rate 3300 rpm= =0D=0ABengston delux-Driver=3D98.9 mph-Tempo 1.28secs.240 yrds. , 6 Iron=3D8= 4.2 mph, face -Tempo 1.12 secs.163 yrds 2* more upright TEL;HOME;VOICE:856 374 2517 TEL;CELL;VOICE:856 905 7155 ADR;HOME:;;805 Marlborough St.;Turnersville;NJ;08012 LABEL;HOME;ENCODING=QUOTED-PRINTABLE:805 Marlborough St.=0D=0ATurnersville, NJ 08012 X-WAB-GENDER:2 BDAY:16011217 EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:20040616T202026Z END:VCARD
