> -----Original Message----- > From: Mossman, Paul (CAR:9D30) > Sent: Thursday, June 25, 2009 9:58 AM > To: Beeton, Carolyn (CAR:9D60); Worley, Dale (BL60:9D30) > Cc: [email protected] > Subject: RE: [sipX-dev] Config for bridged line > appearances(XX-4762/XX-5439) > > Carolyn wrote: > ... > > > > In our Polycom config plug-in, you can go into Advanced and set the > > lineKeys parameter to 2 or more to get more than one button > per AOR. > > Note also that Polycoms have a 'callsPerLineKey' setting: The > number of calls or conferences which may be active or on hold > per line key for a specific registration on the phone. > > The blank default value results in the max value, which is > either 8 or 24, depending on the model. > > I don't think this constitutes "multiple > appearances-per-phone", but I'm not as familiar with the > draft as you. But it is at least probably something to test. > > > -Paul > [email protected] > >
Interesting. I think that works pretty well - my single shared key can handle a held call on x-line-id 0, and an active call on x-line-id 1 - I guess that explains why. I haven't pushed it any further than that as I don't have enough phones. Where it breaks down is when two calls are held - it can't pick which one to unhold. Carolyn _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
