I think what you would need to do is to generate the new profiles for two phones, but not restart them. Then manually insert the, maybe a minor display change or something, so the phone would know to pick them up. What you would need is: reg.x.musicOnHold.uri syntax in the appropriate place in each file for the <MAC>-sipx-config.cfg file for each phone. Then manually restart the two phones. You might also need to turn off RFC2543 from the sip setting in sipxconfig for each phone. Dale or someone else might be able to provide more guidance on this, but right now, I don't see that sipx supports populating the MOH information yet, but it is in the process. Unfortuantely, if you create a new profile for a phone after this is done and it is successful, it will remove that customization. I'm not sure the AudioCodes gateway would work in either case, but at least between two phones on your network it would. Good luck and if you get any progress, keep us posted.
>>> Chris St Denis <[EMAIL PROTECTED]> 9/19/2008 1:57:17 PM >>> I've just obtained the Soundpoint IP 3.1.0 firmware and upgraded two of my phones by music on hold still does not seem to work. Both between phones and phone to audio codes gateway. I am using sipx 3.8.1. Will I need to upgrade to 3.10 for this to work, or is it known to work with 3.8? (I'm planning to upgrade in the future, but we are not ready yet so I'd like it to work with 3.8) _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
