When I asked Polycom I was told
At this time, end-user customers can only download previous software. Please
work directly with the Polycom Certified VoIP Reseller you purchased the
products from to obtain the most current and appropriate software.
which is where I got mine.
However, looking in the sipx issue tracker a while ago I see a link to
their ftp ftp://earlyaccess:[EMAIL PROTECTED]/ which does have
the file on it.
Melcon Moraes wrote:
How to get a 3.1 firmware? I have a couple of SoundPoint IP 330 and
want to make them work with MOH. Am I able to get it from anywhere
being an enduser?
[]'s
MM
On Fri, Sep 19, 2008 at 8:21 PM, Chris St Denis
<[EMAIL PROTECTED]> wrote:
I added <musicOnHold voIpProt.SIP.musicOnHold.uri="[EMAIL PROTECTED]"/> to
the <sip><voIpProt><SIP> section of <MAC>-sipx-config.cfg and it now works
(with sipx 3.8.1) both phone to phone and through the AudioCodes Mediant
Gateway.
I have also added that to the template file
/etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm so when I generate configs
in sipXconfig it now includes it in the file. Here is a patch for anyone
else wanting to do this (domain is hardcoded in so you'll have to edit it)
--- /etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm.old 2008-09-19
16:09:56.000000000 -0700
+++ /etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm 2008-09-19
16:09:41.000000000 -0700
@@ -21,6 +21,7 @@
voIpProt.SIP.${setting.ProfileName}="$!{setting.Value}"
#end
>
+ <musicOnHold
voIpProt.SIP.musicOnHold.uri="[EMAIL PROTECTED]"/>
<outboundProxy
#set ($group =
$cfg.EndpointSettings.getSetting('voIpProt').getSetting('SIP.outboundProxy'))
#foreach ($setting in $cfg.getSettings($group))
Tony Graziano wrote:
I think what you would need to do is to generate the new profiles for two
phones, but not restart them. Then manually insert the, maybe a minor
display change or something, so the phone would know to pick them up.
What you would need is: reg.x.musicOnHold.uri syntax in the appropriate
place in each file for the <MAC>-sipx-config.cfg file for each phone.
Then manually restart the two phones. You might also need to turn off
RFC2543 from the sip setting in sipxconfig for each phone.
Dale or someone else might be able to provide more guidance on this, but
right now, I don't see that sipx supports populating the MOH information
yet, but it is in the process. Unfortuantely, if you create a new profile
for a phone after this is done and it is successful, it will remove that
customization.
I'm not sure the AudioCodes gateway would work in either case, but at least
between two phones on your network it would.
Good luck and if you get any progress, keep us posted.
Chris St Denis <[EMAIL PROTECTED]> 9/19/2008 1:57:17 PM >>>
I've just obtained the Soundpoint IP 3.1.0 firmware and upgraded two of
my phones by music on hold still does not seem to work. Both between
phones and phone to audio codes gateway.
I am using sipx 3.8.1. Will I need to upgrade to 3.10 for this to work,
or is it known to work with 3.8? (I'm planning to upgrade in the future,
but we are not ready yet so I'd like it to work with 3.8)
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list..sipfoundry.org/mailman/listinfo/sipx-users
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
