Thank you Tony and Chris. Already downloaded.
On Fri, Sep 19, 2008 at 9:00 PM, Tony Graziano <[EMAIL PROTECTED]> wrote: > just for you, i'll take it down tomorrow. > > http://www.myitdepartment.net/support/spip_ssip_3_1_0RevB_release_sig.zip > >>>> "Melcon Moraes" <[EMAIL PROTECTED]> 09/19/08 19:47 PM >>> > How to get a 3.1 firmware? I have a couple of SoundPoint IP 330 and > want to make them work with MOH. Am I able to get it from anywhere > being an enduser? > > []'s > MM > > On Fri, Sep 19, 2008 at 8:21 PM, Chris St Denis > <[EMAIL PROTECTED]> wrote: >> I added <musicOnHold voIpProt.SIP.musicOnHold.uri="[EMAIL PROTECTED]"/> to >> the <sip><voIpProt><SIP> section of <MAC>-sipx-config.cfg and it now works >> (with sipx 3.8.1) both phone to phone and through the AudioCodes Mediant >> Gateway. >> >> I have also added that to the template file >> /etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm so when I generate configs >> in sipXconfig it now includes it in the file. Here is a patch for anyone >> else wanting to do this (domain is hardcoded in so you'll have to edit it) >> >> >> --- /etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm.old 2008-09-19 >> 16:09:56.000000000 -0700 >> +++ /etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm 2008-09-19 >> 16:09:41.000000000 -0700 >> @@ -21,6 +21,7 @@ >> voIpProt.SIP.${setting.ProfileName}="$!{setting.Value}" >> #end >> > >> + <musicOnHold >> voIpProt.SIP.musicOnHold.uri="[EMAIL PROTECTED]"/> >> <outboundProxy >> #set ($group = >> $cfg.EndpointSettings.getSetting('voIpProt').getSetting('SIP.outboundProxy')) >> #foreach ($setting in $cfg.getSettings($group)) >> >> >> >> >> Tony Graziano wrote: >> >> I think what you would need to do is to generate the new profiles for two >> phones, but not restart them. Then manually insert the, maybe a minor >> display change or something, so the phone would know to pick them up. >> >> What you would need is: reg.x.musicOnHold.uri syntax in the appropriate >> place in each file for the <MAC>-sipx-config.cfg file for each phone. >> >> Then manually restart the two phones. You might also need to turn off >> RFC2543 from the sip setting in sipxconfig for each phone. >> >> Dale or someone else might be able to provide more guidance on this, but >> right now, I don't see that sipx supports populating the MOH information >> yet, but it is in the process. Unfortuantely, if you create a new profile >> for a phone after this is done and it is successful, it will remove that >> customization. >> >> I'm not sure the AudioCodes gateway would work in either case, but at least >> between two phones on your network it would. >> >> Good luck and if you get any progress, keep us posted. >> >>>>> Chris St Denis <[EMAIL PROTECTED]> 9/19/2008 1:57:17 PM >>> >> I've just obtained the Soundpoint IP 3.1.0 firmware and upgraded two of >> my phones by music on hold still does not seem to work. Both between >> phones and phone to audio codes gateway. >> >> I am using sipx 3.8.1. Will I need to upgrade to 3.10 for this to work, >> or is it known to work with 3.8? (I'm planning to upgrade in the future, >> but we are not ready yet so I'd like it to work with 3.8) >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list..sipfoundry.org/mailman/listinfo/sipx-users >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
