How to get a 3.1 firmware? I have a couple of SoundPoint IP 330 and
want to make them work with MOH. Am I able to get it from anywhere
being an enduser?
[]'s
MM
On Fri, Sep 19, 2008 at 8:21 PM, Chris St Denis
<[EMAIL PROTECTED]> wrote:
> I added <musicOnHold voIpProt.SIP.musicOnHold.uri="[EMAIL PROTECTED]"/> to
> the <sip><voIpProt><SIP> section of <MAC>-sipx-config.cfg and it now works
> (with sipx 3.8.1) both phone to phone and through the AudioCodes Mediant
> Gateway.
>
> I have also added that to the template file
> /etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm so when I generate configs
> in sipXconfig it now includes it in the file. Here is a patch for anyone
> else wanting to do this (domain is hardcoded in so you'll have to edit it)
>
>
> --- /etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm.old 2008-09-19
> 16:09:56.000000000 -0700
> +++ /etc/sipxpbx/polycom/mac-address.d/sip-2.0.cfg.vm 2008-09-19
> 16:09:41.000000000 -0700
> @@ -21,6 +21,7 @@
> voIpProt.SIP.${setting.ProfileName}="$!{setting.Value}"
> #end
> >
> + <musicOnHold
> voIpProt.SIP.musicOnHold.uri="[EMAIL PROTECTED]"/>
> <outboundProxy
> #set ($group =
> $cfg.EndpointSettings.getSetting('voIpProt').getSetting('SIP.outboundProxy'))
> #foreach ($setting in $cfg.getSettings($group))
>
>
>
>
> Tony Graziano wrote:
>
> I think what you would need to do is to generate the new profiles for two
> phones, but not restart them. Then manually insert the, maybe a minor
> display change or something, so the phone would know to pick them up.
>
> What you would need is: reg.x.musicOnHold.uri syntax in the appropriate
> place in each file for the <MAC>-sipx-config.cfg file for each phone.
>
> Then manually restart the two phones. You might also need to turn off
> RFC2543 from the sip setting in sipxconfig for each phone.
>
> Dale or someone else might be able to provide more guidance on this, but
> right now, I don't see that sipx supports populating the MOH information
> yet, but it is in the process. Unfortuantely, if you create a new profile
> for a phone after this is done and it is successful, it will remove that
> customization.
>
> I'm not sure the AudioCodes gateway would work in either case, but at least
> between two phones on your network it would.
>
> Good luck and if you get any progress, keep us posted.
>
>>>> Chris St Denis <[EMAIL PROTECTED]> 9/19/2008 1:57:17 PM >>>
> I've just obtained the Soundpoint IP 3.1.0 firmware and upgraded two of
> my phones by music on hold still does not seem to work. Both between
> phones and phone to audio codes gateway.
>
> I am using sipx 3.8.1. Will I need to upgrade to 3.10 for this to work,
> or is it known to work with 3.8? (I'm planning to upgrade in the future,
> but we are not ready yet so I'd like it to work with 3.8)
>
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list..sipfoundry.org/mailman/listinfo/sipx-users
>
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
>
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
