It's covered in detail in their installation manual - using MEGACO specifications.
www.audiocodes.com/filehandler.ashx?fileid=73916 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Geoff Van Brunt Sent: Thursday, November 05, 2009 2:15 PM To: Austin Curry; Kgee Gee Cc: [email protected] Subject: Re: [sipx-users] Power Supply Failure AudioCodes MK1 / M1000 The outlets test correctly and do include a ground. The racks in which the devices are installed are also grounded. The CO stuff, I'm not sure about. Any advice on what is considered proper grounding? Geoff Van Brunt Information Technology Manager DST Consulting Engineers From: [email protected] [mailto:[email protected]] On Behalf Of Austin Curry Sent: November-05-09 11:55 AM To: Kgee Gee Cc: [email protected] Subject: Re: [sipx-users] Power Supply Failure AudioCodes MK1 / M1000 We have several Audiocodes M1K gateways deployed for several clients and most have been running for over a year without issue. We've found them to be very reliable and haven't had the issues in which you describe. Are your M1K's and incoming CO lines properly grounded? Austin _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
