This is done using BLF to monitor the parking slot. To set it up, under the operator's speed dial settings add a speed dial for the park orbit number and check the subscribe to presence box. then click save and update phones. the operators will then be able to see the status of the park orbit and select the orbit to pick it up.
Josh Patten Assistant Network Administrator Brazos County IT Dept. (979) 361-4676 On 2/9/2010 2:28 PM, [email protected] wrote: > Thanks. In this scenario, can the secretary see if "John" never picks up > the call? I see where the caller can transfer out of the park, and where > you can set timeout, but not where the secretary can monitor whether or > not anyone has picked it up. > > Thanks, > Matthew > > On 2/9/2010 1:53 PM, Dale Worley wrote: > >> With sipXecs 4.0, probably the best way to do this is to set up a series >> of park "orbits", say, 201, 202, 203, etc. Then the secretary parks >> calls on the orbits as appropriate, and people pick up the calls with *4 >> 201, *4 202, etc. >> >> >> > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
