Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Organization: SipXecs Forum In-Reply-To: <[email protected]> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <43585> Message-ID: <[email protected]>
Quote: > Your registration, in sipx, should show your public ip > address of the remote > router. It shows: "AKHome"<sip:mailto:[email protected]> <sip:mailto:[email protected] :10071;rinstance=7f6e1fb84775534b;x-sipX-privcontact=192.168 .30.2%3A18400 > 969 Is it correct? Quote: > What is your firewall local address at the sipx > installation? Is is > 192.168.0.100? If so that is correct. Yes, it is 0.100 Quote: > Wait a minute... > > Your public DNS points to your private ip address. FIX > that before anything > else. Your public facing dns needs to point to the > public facing ip on your > sipx firewall, NOT the private ip. That will never > work. > > My mistake, there is no dns srv record. Why don't you > fix that first. To be honest, I don't know where should I add that DNS SRV records. I know there is tutorial on that, but I was wondering why I need that. In our local network (where sipxecs located) we don't have internal DNS, we are using some one from outside world (72.xxx.xxx.xxx) and I don't know how can I add DNS SRV records to that outside DNS. I could install it on sipxecs machine as installation wizard has proposed, but I have ommited that step, because for local machines its not necessary I think, but for far-end users it should be useless since they cannot reach it. Am I wrong? _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
