4.3.2 is unstable. I've tested it against a patton pri gateway with no issues for faxing but I do have other issues. An inplace upgrade may not be possible yet either. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: Discussion list for users of sipXecs software <[email protected]> Sent: Mon Oct 11 21:22:27 2010 Subject: Re: [sipx-users] Faxing Hi all of you, may i know if i have mediant 1000 and i reinstall my server to 4.3. This is able to send and receive fax t.38 or t.30? Mike, is possible i just configure my mediant and point back to my extension number that i set from sipXecs server? now i try to install on my VM by virtualbox. hopefully can work very well :) Winson On 10/12/2010 01:45 AM, Tony Graziano wrote: > I'm not mike but I have tested them with patton. It works fine. > > I've also tested with voip.ms, but I'm not ready to rule on that yet > because > you need to do 20 or so pages (long faxes) to adequately test. > > Your AC gateway should recognize its a fax and go to t.38, just configure > the fax mode for t.38... > ============================ > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > ----- Original Message ----- > From: [email protected] > <[email protected]> > To: [email protected]<[email protected]>; Discussion list for users of > sipXecs software<[email protected]> > Sent: Mon Oct 11 13:42:17 2010 > Subject: Re: [sipx-users] Faxing > > Mike, > > Have you tried this with your mediants? I keep getting empty faxes. I've > manually configured our gateways and I seem to have something off on the > t.38 side of things. > > Kyle > > On Thu, Oct 7, 2010 at 8:52 AM, [email protected]<[email protected]> > wrote: > > >>> ?And at this point I think only DID faxing via t.38 is being addressed. >>> >> This >> >>> ?means if your provider doesn't support t.38 you will want to get trunks >>> >> from >> >>> ?one that does support it (or go through a PRI gateway). >>> >> We use the mediant 2K with PRI's and route faxes to a fax server. I would >> love to eliminate some complexities, especially if both receive and send >> are >> possibly coming to sipx. That would be wonderful. >> >> Thanks for the update and the link to keep track. >> >> Mike >> >> >> >> > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
