Ok. That might work well. What I'd want to try is just adding the trunk (not needed if just inbound anyway), and putting a teliax DID on it and having someone send a 10-20 page fax, or several, to see if they are succesful.
Additionally, if your fxs supports t.38, and is behind sipx already, doing a click to call from the gui to have your fax send me one via t.38 (no trunks involved). ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: Discussion list for users of sipXecs software <[email protected]> Sent: Wed Oct 13 13:04:40 2010 Subject: Re: [sipx-users] Faxing Hi Tony, I might be able to help. I know I've talked about Teliax in the past. They have a T.38 service via their wholesale service and they have set up a PAYG account for me on that. I could temporarily have them add your IP to the ACL for the account if it helps. I haven't tested sipX yet directly with the wholesale account. I can discuss details off list if this would help. I'd also be happy to hang a FXS with T.38 support on a public IP and put a fax machine on it. I only have lower-end Linksys and Grandstream ATAs available, but have run 10+ page faxes through them with T.38 to Teliax. I had a customer doing 20-30 faxes a day through a Grandstream for about 3 months with no problems. Dave ----- Original Message ----- From: "Tony Graziano" <[email protected]> To: [email protected], "Discussion list for users of sipXecs software" <[email protected]> Sent: Wednesday, October 13, 2010 10:59:22 AM GMT -06:00 US/Canada Central Subject: Re: [sipx-users] Faxing I dont know if that will help. my pri has t.38, no issues with that. i was trying to get a test trunk for a day that has t.38 to test that, but I have some things on my schedule i cant avoid, so it will wait until next week. I wanted to see if someone can send me a sip uri only fax (no trunks involved). This essentially means they would need to put in a dial rule or do a click to call for a fxs adapter that is t.38 enabled), but so far no one has offered that. I will try to deal with it next week. I was hoping to find a PAYG ITSP that offers t.38 trunking and is known to work in general with sipx. On Wed, Oct 13, 2010 at 11:52 AM, [email protected] < [email protected] > wrote: Tony, let me know if you still need fax help, we can test what ever you need if we've got what is required. We use flowroute and voip.ms , one of them has T.38 if not both or we can go through the mediant. Mike _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
