As long as t.38 is enable for fax bypass, it should negotiate t.38 with mod_spandsp in 4.3.2. PRI's are generally not an issue, properly configured POTS gateways with the proper feature set are typically not an issue either.
There is a place in unified messaging for 4.3.2 to put in a fax DID number, alias or sip uri (for the primary sipdomain). Siptrunks are another thing altogether though. On 10/11/10, [email protected] <[email protected]> wrote: >>Hi all of you, may i know if i have mediant 1000 and i reinstall my server >> to 4.3. >>This is able to send and receive fax t.38 or t.30? > > I have a 2000 and it's running 5.6. > >>Mike, is possible i just configure my mediant and point back to my >>extension number that i set from sipXecs server? >>now i try to install on my VM by virtualbox. hopefully can work very well >> :) > > It dawned on me that we don't even use detection on the mediant, we just > forward calls based on DID's to the right server. > I'm guessing you're trying some of the new features of sipx which I've not > had time to read about yet. > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Sent from my mobile device ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
