I have the same problem sending from cli. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: 'Discussion list for users of sipXecs software' <[email protected]> Sent: Mon Nov 15 10:32:39 2010 Subject: Re: [sipx-users] testing t38 fax with sipx. Ok, now i see that fs does send t38 re-invite, and further signalling looks to be ok. But fax message has not been send. In the trace (attached) i see that mp114 sends bye. In the mp114's syslog i see that it receives 'on hook' event from it's fxs channel. Mmm... i use my pc instead of real fax machine. So possibly problem is there.... I'll try with a hardware fax machine (if i'll manage to find it). Thanks and regards, Nikolay. _____ From: [email protected] [mailto:[email protected]] On Behalf Of Cristi Starasciuc Sent: Monday, November 15, 2010 5:40 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] testing t38 fax with sipx. Indeed, I forgot about that, thanks Tony The parameter is: <param name="inbound-proxy-media" value="true"/> Please add it to {sipx_install}/etc/sipxpbx/freeswitch/conf/sip_profiles/sipX_profile.xml and try again. C On 11/15/2010 04:23 PM, Tony Graziano wrote: There was a t.38 parameter that needed to go in the sipxprofile in fs (profiles) as i recall. proxy media... On Mon, Nov 15, 2010 at 7:10 AM, Cristi Starasciuc <[email protected]> wrote: The patch is in, reinvite should have taken place, I don't know why it doesn't, I'll look into it. Meanwhile, can you please add <param name="enable-t38" value="true"/> in {sipx_install}/etc/sipxpbx/freeswitch/conf/autoload_configs/fax.conf.xml and give it another try? Regards, Cristi On 11/15/2010 11:52 AM, Nikolay Kondratyev wrote: Hi all, i tried to test t38 fax with sipx/fs, ... but alas... I installed "a snapshot version" of sipx: 0.0.4.3.2-62363c1 2010-11-07T04:02:55 build27 on a virtual machine, configured fax extention 301 for a user 201. Registered Audiocodes mp114 fxs as another user - 203. mp114 is configured to switch to t38 using reinvite. So the first test is to send fax from 203 to 301. I call from 203 to 301, hear fax tone. But fax machines are not connected. In the trace (attached) one can see, that there is not re-negotiation (re-invite) from sipx to switch media from audio to "image udptl t38". I looked at http://track.sipfoundry.org/browse/XX-8645. And see, if i understood correctly, that there should exist a patch to enable "t38 reinvite". Is it included in the version i installed? Should i be patient and wait a bit? Please advise... Thanks and regards, Nikolay. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
