Can you please put the IVR on debug mode and send the log over
(sipxivr.log)?
Also, run the tests several times. I got successful fax from time to
time (i am using either FS cli or FaxVoip an XP application).
When/If you get the hardware fax machine, can you please run tests with
and without the media proxy parameter in sipX_profile.xml?
Thanks,
Cristi
On 11/15/2010 05:32 PM, Nikolay Kondratyev wrote:
Ok, now i see that fs does send t38 re-invite, and further signalling
looks to be ok.
But fax message has not been send. In the trace (attached) i see
that mp114 sends bye.
In the mp114's syslog i see that it receives 'on hook' event from it's
fxs channel.
Mmm... i use my pc instead of real fax machine. So possibly problem is
there....
I'll try with a hardware fax machine (if i'll manage to find it).
Thanks and regards,
Nikolay.
------------------------------------------------------------------------
*From:* [email protected]
[mailto:[email protected]] *On Behalf Of
*Cristi Starasciuc
*Sent:* Monday, November 15, 2010 5:40 PM
*To:* Discussion list for users of sipXecs software
*Subject:* Re: [sipx-users] testing t38 fax with sipx.
Indeed, I forgot about that, thanks Tony
The parameter is:
<param name="inbound-proxy-media" value="true"/>
Please add it to
{sipx_install}/etc/sipxpbx/freeswitch/conf/sip_profiles/sipX_profile.xml
and try again.
C
On 11/15/2010 04:23 PM, Tony Graziano wrote:
There was a t.38 parameter that needed to go in the sipxprofile
in fs (profiles) as i recall. proxy media...
On Mon, Nov 15, 2010 at 7:10 AM, Cristi Starasciuc
<[email protected] <mailto:[email protected]>> wrote:
The patch is in, reinvite should have taken place, I don't
know why it doesn't, I'll look into it.
Meanwhile, can you please add <param name="enable-t38"
value="true"/> in
{sipx_install}/etc/sipxpbx/freeswitch/conf/autoload_configs/fax.conf.xml
and give it another try?
Regards,
Cristi
On 11/15/2010 11:52 AM, Nikolay Kondratyev wrote:
Hi all,
i tried to test t38 fax with sipx/fs, ... but alas...
I installed "a snapshot version" of sipx: 0.0.4.3.2-62363c1
2010-11-07T04:02:55 build27 on a virtual machine, configured
fax extention 301 for a user 201.
Registered Audiocodes mp114 fxs as another user - 203.
mp114 is configured to switch to t38 using reinvite.
So the first test is to send fax from 203 to 301.
I call from 203 to 301, hear fax tone. But fax machines are
not connected.
In the trace (attached) one can see, that there is not
re-negotiation (re-invite) from sipx to switch media from
audio to "image udptl t38".
I looked at http://track.sipfoundry.org/browse/XX-8645. And
see, if i understood correctly, that there should exist a
patch to enable "t38 reinvite".
Is it included in the version i installed?
Should i be patient and wait a bit?
Please advise...
Thanks and regards,
Nikolay.
_______________________________________________
sipx-users mailing list
[email protected] <mailto:[email protected]>
List Archive:http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
<mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
======================
Tony Graziano, Manager
Telephone: 434.984.8430
sip: [email protected]
<mailto:[email protected]>
Fax: 434.326.5325
Email: [email protected]
<mailto:[email protected]>
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: [email protected]
<mailto:[email protected]>
Helpdesk Contract Customers:
http://support.myitdepartment.net
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
_______________________________________________
sipx-users mailing list
[email protected]
List Archive:http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
