Remember to make sure your settings are still in place after the log is put
in debug. If not, put them back and restart fs via sipxproc again, then
test.
============================
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.984.8431

Email: [email protected]

LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
Fax: 434.984.8427

Helpdesk Contract Customers:
http://www.myitdepartment.net/gethelp/

----- Original Message -----
From: [email protected]
<[email protected]>
To: Discussion list for users of sipXecs software
<[email protected]>
Sent: Mon Nov 15 10:58:33 2010
Subject: Re: [sipx-users] testing t38 fax with sipx.

Can you please put the IVR on debug mode and send the log over
(sipxivr.log)?

Also, run the tests several times. I got successful fax from time to
time (i am using either FS cli or FaxVoip an XP application).

When/If you get the hardware fax machine, can you please run tests with
and without the media proxy parameter in sipX_profile.xml?


Thanks,
Cristi

On 11/15/2010 05:32 PM, Nikolay Kondratyev wrote:
> Ok, now i see that fs does send t38 re-invite, and further signalling
> looks to be ok.
> But fax message has not been send. In the trace (attached) i see
> that mp114 sends bye.
> In the mp114's syslog i see that it receives 'on hook' event from it's
> fxs channel.
> Mmm... i use my pc instead of real fax machine. So possibly problem is
> there....
> I'll try with a hardware fax machine (if i'll manage to find it).
> Thanks and regards,
> Nikolay.
>
>     ------------------------------------------------------------------------
>     *From:* [email protected]
>     [mailto:[email protected]] *On Behalf Of
>     *Cristi Starasciuc
>     *Sent:* Monday, November 15, 2010 5:40 PM
>     *To:* Discussion list for users of sipXecs software
>     *Subject:* Re: [sipx-users] testing t38 fax with sipx.
>
>     Indeed, I forgot about that, thanks Tony
>
>     The parameter is:
>     <param name="inbound-proxy-media" value="true"/>
>
>     Please add it to
>
> {sipx_install}/etc/sipxpbx/freeswitch/conf/sip_profiles/sipX_profile.xml
>     and try again.
>
>     C
>
>     On 11/15/2010 04:23 PM, Tony Graziano wrote:
>>     There was a t.38 parameter that needed to go in the sipxprofile
>>     in fs (profiles) as i recall. proxy media...
>>
>>     On Mon, Nov 15, 2010 at 7:10 AM, Cristi Starasciuc
>>     <[email protected] <mailto:[email protected]>> wrote:
>>
>>         The patch is in, reinvite should have taken place, I don't
>>         know why it doesn't, I'll look into it.
>>         Meanwhile, can you please add <param name="enable-t38"
>>         value="true"/> in
>>
>> {sipx_install}/etc/sipxpbx/freeswitch/conf/autoload_configs/fax.conf.xml
>>         and give it another try?
>>
>>         Regards,
>>         Cristi
>>
>>
>>         On 11/15/2010 11:52 AM, Nikolay Kondratyev wrote:
>>>         Hi all,
>>>         i tried to test t38 fax with sipx/fs, ... but alas...
>>>         I installed "a snapshot version" of sipx: 0.0.4.3.2-62363c1
>>>         2010-11-07T04:02:55 build27 on a virtual machine, configured
>>>         fax extention 301 for a user 201.
>>>         Registered Audiocodes mp114 fxs as another user - 203.
>>>         mp114 is configured to switch to t38 using reinvite.
>>>         So the first test is to send fax from 203 to 301.
>>>         I call from 203 to 301, hear fax tone. But fax machines are
>>>         not connected.
>>>         In the trace (attached) one can see, that there is not
>>>         re-negotiation (re-invite) from sipx to switch media from
>>>         audio to "image udptl t38".
>>>         I looked at http://track.sipfoundry.org/browse/XX-8645. And
>>>         see, if i understood correctly, that there should exist a
>>>         patch to enable "t38 reinvite".
>>>         Is it included in the version i installed?
>>>         Should i be patient and wait a bit?
>>>         Please advise...
>>>         Thanks and regards,
>>>         Nikolay.
>>>
>>>
>>>         _______________________________________________
>>>         sipx-users mailing list
>>>         [email protected]
>>> <mailto:[email protected]>
>>>         List Archive:http://list.sipfoundry.org/archive/sipx-users/
>>
>>
>>         _______________________________________________
>>         sipx-users mailing list
>>         [email protected]
>>         <mailto:[email protected]>
>>         List Archive: http://list.sipfoundry.org/archive/sipx-users/
>>
>>
>>
>>
>>     --
>>     ======================
>>     Tony Graziano, Manager
>>     Telephone: 434.984.8430
>>     sip: [email protected]
>>     <mailto:[email protected]>
>>     Fax: 434.326.5325
>>
>>     Email: [email protected]
>>     <mailto:[email protected]>
>>
>>     LAN/Telephony/Security and Control Systems Helpdesk:
>>     Telephone: 434.984.8426
>>     sip: [email protected]
>>     <mailto:[email protected]>
>>
>>     Helpdesk Contract Customers:
>>     http://support.myitdepartment.net
>>
>>     Linked-In Profile:
>>     http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
>>
>>
>>     _______________________________________________
>>     sipx-users mailing list
>>     [email protected]
>>     List Archive:http://list.sipfoundry.org/archive/sipx-users/
>
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to