On 1/26/2011 8:29 AM, Michal Bielicki wrote: > Am 26.01.2011 um 04:09 schrieb Matthew Kitchin (usenet/public): > >> After talking with Tony, I unfortunately know I can't put a G729 freeswitch >> license in the version of freeswitch that runs in sipx 4.2.1. I got Verizon >> to up my bandwidth, so I can switch sipxbridge back to blocking G729. I >> can't really do this at my low bandwidth sites though. > You can easily use a newer freeswitch version and get g729 licenses for it. > If you do not expect help at midnight CET I can easily help you set that up, > its pretty simple. > > cheers > Michal > I have a test system where I can try this, so I would love some instructions on how to upgrade freeswitch and set this up. I am up and running on G711 at my main site today, so my major crisis is resolved. I sincerely appreciate your offer to help. If I can get some good experience with this, I will be more than happy to be a source of information for others that have the same issue. >> Does anyone have any interest in investigating why the calls die during >> transfer, hold, etc. and why they behave differently with the different >> polycom firmwares? I will be glad to provide the data, logs, testing, and >> such. I'm just not too good at troubleshooting sip. If it doesn't interest >> anyone, I guess I'm stuck running G711 until the version that supports G729 >> freeswitch licensing comes out. Thanks all. >> ------Original Message------ >> From: Matthew Kitchin (public/usenet) >> To: Discussion list for users of sipXecs software >> Subject: Codec/freeswitch problems >> Sent: Jan 25, 2011 4:00 PM >> >> I'm running sipXconfig (4.2.1-018971 2010-08-17T02:20:18 build20), >> sipxbridge, Verixon VOIP, Polycom 450s, 550s, and 1 650. >> >> It has been a rough week. I'll leave out some of the details as to how I >> got where I am, and just describe the problem. >> I have sipxbridge set to allow all codecs. >> Phones are set to use G722, G729, and G711 in that order. >> The goal is to have G722 for internal communication and G729 for calls >> to the PSTN. >> Verizon does not allow G722. They do support codec renegotiation during >> a call. >> I'm having a variety of problems that I believe may have something to do >> with freeswitch (within sipx) not supporting G729. >> I have different symptoms with different firmware. >> 3.1.3c - Call drops when performing a blind transfer - destination phone >> rings one time. Hold works fine. >> 3.2.1b - Call cannot be retrieved from hold. Transfers do work. >> 3.2.4 - Call drops when performing a blind transfer - destination phone >> rings one time. Hold works fine. >> >> If I put the defaults back in sipxbridge to block G729, everything seems >> fine. >> >> I upgraded to 4.2.1 from 4.0.4 a few months ago. We were going over our >> allotted bandwidth and dropping calls. That was when I realized the new >> default setting in sipxbridge blocked G729. We need to use G729, so I >> blanked out that field. I'm guessing that is when the things above >> started going wrong. I have no idea why the different firmwares behave >> differently. I'm running 3.2.1b right now with unhappy users. I've got >> an urgent request in to Verizon to up our bandwidth on this circuit, but >> that can't be my long term solution. >> I will be glad to provide wireshark or merged logs for any of these >> scenarios. I tried sipx-trace, but I wasn't able to get a lot of info. I >> have it on an isolated system, so the logs aren't full of unrelated stuff. >> I've read through this: >> http://wiki.sipfoundry.org/display/sipXecs/G729 >> and I have looked at some of the posts in the past few months about >> G729. Would you assume this is a G729 issue? From what I've read, it >> doesn't look like I have any options for licensing G729 for freeswitch >> on sipx 4.2.1. >> My brain is just about scrambled eggs right now. >> I'm really looking for: >> 1) basic thoughts on my issue if anyone can enlighten me >> 2) a possible fix related to firmwares, in case there is something along >> those lines that would help me >> 3) long term solution for licensing g729 in freeswitch (assuming I am >> correct in what the issue is) >> >> Thanks as always, >> Matthew >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ > Michal Bielicki > Geschäftsführer / CEO > > Seventh Signal Ltd.& Co. KG > Weigandufer 45, Büro 115, D-12059 Berlin > Voice: +49 30 60988730 > > Amtsgericht Charlottenburg HRA 44413 B > Ust.-ID: DE266981999 > Geschäftsführer: Michal Bielicki > Persönlich Haftende Gesellschafterin: > Seventh Signal Ltd, 69 Great Hampton St. Birmingham, > B18 6EW, GB, Company Nr.: 06889439 > WWW.: http://www.seventhsignal.de >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
