In gates never give me a problem. Karoo works well too, it has the ability to upload your own MOH files and plays them no matter the UA or itsp. On Mar 15, 2012 9:00 PM, "S.K.- G" <[email protected]> wrote:
> After the SBC support (ACME) was exhausted after 2 complete days of > working to handle the registration through the SBC as well as refer and > Notify.. They finally gave up.. They asked us to check our SIPX > configuration.**** > > What I did, I put the registration back directly on SIPX and everything > worked just fine.. **** > > ** ** > > Yes, I tried both with and without a default SBC IP address / port 5060 > without any difference.**** > > ** ** > > Regards**** > > Saad**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Thursday, March 15, 2012 3:10 PM > *To:* [email protected]; Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] Signaling issues on new install**** > > ** ** > > ** ** > > On Thu, Mar 15, 2012 at 2:59 PM, Joe Micciche <[email protected]> wrote: > **** > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1**** > > > > We are experiencing similar problems, started after the phone > > registration were moved to an external SBC(ACME 3820),,,,,,,,,,,. > > We were working on changing our deployment by updating our core > > network design, just completed the change this morning, our call > > flow became: Polycom >> SIPX>> SBC>> ITSP .. All Polycom > > registration are done through the SBC..**** > > Wouldn't your callflow actually be: > > Polycom -> [outside realm] sbc [inside realm] -> sipX -> [inside > realm] sbc [outside realm] -> ITSP?**** > > ** ** > > Polycom [register>SBC>passthru to SIPX] ->sipxproxy to ->unamanaged > gateway being sbc <-->> media to phone negotiated by sbc, sipx is not > anchoring it. **** > > > > 1. The MWI stopped to update itself. 2. The MOH has > > also stopped to play . 3. The caller ID setting on the > > "unmanaged Gateway" that is supposed to override the users CLID is > > not taking in place and not working .. Also the CLID is showing the > > extension number no matter what the setting was on the extension > > caller ID settings. 4. The call forwarding is still OK ; > > however, the attended AND Unattended transfer failed to work.**** > > All of this should Just Work, as others have noted it may require a > slight tweak to your sbc config handling REFERs. We are experiencing > #2 above, but our users like it as they hate hold music. > > Regardless, more details would be helpful.**** > > > > Is there by chance a way to treat ACME 3820 as a "MANAGED" gateway? > > Can we use ACME 1000 for it?**** > > Is the APKT set as your default sbc for internet calling? > > - -- > ================================================================== > Joe Micciche [email protected] > Red Hat, Inc. http://www.redhat.com > Senior Communications Engineer X (81) 44554 > +1.919.754.4554 Key: 65F90FE1 > ================================================================== > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.12 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iEYEARECAAYFAk9iO/QACgkQJHjEUGX5D+HwtACeIuO/JyBb+CnirlqOiRjNYjju > CPAAnj9eI2GLt+MOrKxcwzpTgso4KC6w > =0mHm > -----END PGP SIGNATURE-----**** > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > **** > > ** ** > > -- > ~~~~~~~~~~~~~~~~~~ > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > ~~~~~~~~~~~~~~~~~~ > Linked-In Profile: > http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > Ask about our Internet Fax services! > ~~~~~~~~~~~~~~~~~~**** > > LAN/Telephony/Security and Control Systems Helpdesk:**** > > Telephone: 434.984.8426**** > > sip: [email protected]**** > > ** ** > > Helpdesk Customers: http://myhelp.myitdepartment.net**** > > Blog: http://blog.myitdepartment.net**** > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
