The reason you see it as an airBridge or rather in green color is because the aPPT in WB Mode are in point to point mode and like 2 client devices, that is the reason.
When you disconnect the unit from the LAN or PC, check which primary port is selected and also the configuration port? Could you give us more details on your setup of the units and other IP settings and also from which end you are trying to monitor to understand your problem better? Thanks, Vasu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pascal Losier Sent: Saturday, July 12, 2003 5:03 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] Simple NMS & APP total in wireless bridge mode. If I run a APP total as a wireless bridge mode. Simple NMS will try using airbridge monitor to manage the APPtotal. I also notice that when the unit has power but the unit is not connected to a lan or PC, I cannot log in the unit from the wireless side. I also see that unit trying to associated to the APPtower. Is that behavior normal. Usually I can log wireless into device even if they are unplug from a Lan. I seems to behave a little weird but it is OK when plug in a Lan. The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
