So WHAT exactly is the point with the rj11 cable ? Sounds like a waste to me if you can use the cat5. Not that a couple of rj11 connectors are a lot of money but still not only are they a extra cost but the fact that they are installed and wired means a little bit more work on each unit and if you can use the cat5 cable..... Come one nobody will hurt sB if you guys would say that one of your engineers had a brain fart and didn't think of using the cat5 going inside for power....!!
Best regards, Eje Gustafsson mailto:[EMAIL PROTECTED] The Family Entertainment Network http://www.fament.com Phone : 620-231-7777 Fax : 620-231-4066 - Your Full Time Professionals - eBay UserID : macahan --- searchable smartBridges mailing list archive. http://www.mail-archive.com/smartbridges40part-15.org/ -- NP> The external unit can be powered either through the CAT5 cable or the NP> separate RJ11 cable running to it. The supplied wall plate will put the NP> power on the CAT5 going outside and thus feed the power to the outside NP> unit. NP> Nish NP> -----Original Message----- NP> From: [EMAIL PROTECTED] NP> [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree NP> Network NP> Sent: Saturday, August 23, 2003 11:02 AM NP> To: '[EMAIL PROTECTED]' NP> Subject: RE: [smartBridges] smartBridges launches PoE Outdoor NP> Huh.now I am stumped. I see that the POE unit is outside. So.if only NP> one CAT5 passes through the wall, how does the outside unit get power?? NP> You cant possibly be using the indoor POE unit to combine the signal and NP> power, then doing it again outside?? NP> Sorry.I am just confused. NP> Oh.and I don't use ANY flush mounts (too much work). I use ONLY the NP> surface mount jacks. I also don't fish anyone's walls. That would cost NP> me too much in subcontractor fees. I run all cable outside, with one NP> penetration point where we put a surface mount RJ45 jack, then a short NP> CAT5 to the router/pc. NP> Sully NP> -----Original Message----- NP> From: [EMAIL PROTECTED] NP> [mailto:[EMAIL PROTECTED] NP> Sent: Friday, August 22, 2003 7:42 PM NP> To: [EMAIL PROTECTED] NP> Subject: RE: [smartBridges] smartBridges launches PoE Outdoor NP> Yes we are planning for the Flush mount. But I there is still time to NP> change. This can be changed even at a later time based on more user NP> feedback. NP> Based on the discussion on this forum a few days ago, we have modified NP> the mounting instructions such that only one CAT5 cable needs to go NP> through the wall. NP> Nish NP> -----Original Message----- NP> From: [EMAIL PROTECTED] NP> [mailto:[EMAIL PROTECTED] On Behalf Of Chris Chance NP> Sent: Saturday, August 23, 2003 7:43 AM NP> To: '[EMAIL PROTECTED]' NP> Subject: RE: [smartBridges] smartBridges launches PoE Outdoor NP> I know this flush mount is not a good idea a surface box I would think NP> would make things easier... did the doc really say flush mount? I hope NP> not :( don't drill 2 holes use a 1/4 inch hole instead of 3/8 or just go NP> one side up to fit both inside. NP> Chris NP> -----Original Message----- NP> From: The Wirefree Network [mailto:[EMAIL PROTECTED] NP> Sent: Friday, August 22, 2003 11:42 AM NP> To: [EMAIL PROTECTED] NP> Here is my 2 cents on this product that is obviously already in NP> production...too late to make suggestions I guess. NP> I definitely LOVE the compliance factors...the self sensing power NP> adjustment....and the protection! Much needed improvements!! NP> I don't like the added work I have to do to mount/install NP> this...mounting the box, drilling 2 holes, cutting a hole in there wall NP> for the flush mount plate, etc! I guess the client could still do a NP> power reset from inside the home...that's okay. I also don't like the NP> power plug using Rj-11...but there really is not chance of hurting NP> anything there. NP> I personally use a surface mount RJ45 block for all my installs. I NP> drill one small hole from the outside and mount the jack over the top of NP> the hole. Sure...flush mounts look nicer...but more work!! NP> Sully NP> -----Original Message----- NP> From: Pallab Chakrabarti [mailto:[EMAIL PROTECTED] NP> Sent: Friday, August 22, 2003 4:52 AM NP> To: [EMAIL PROTECTED] NP> Subject: smartBridges launches PoE Outdoor NP> Hi NP> smartBridges has introduced PoE Outdoor(tm), a unique concept of dynamic NP> Power over Ethernet for outdoor wireless installations. Please find NP> attached the product brochure and the press release from smartBridges. NP> Please visit www.smartbridges.com/new/products/po.php for details on the NP> PoE Outdoor. NP> Thanks NP> smartBridges Global Marketing NP> The PART-15.ORG smartBridges Discussion List NP> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe NP> smartBridges <yournickname> NP> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe NP> smartBridges) NP> Archives: http://archives.part-15.org -- [This E-mail scanned for viruses by Declude Virus] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
