Ok. But you said that you could do the power on the cat5 to the outside ? Also WHY would I want to run TWO cables to the outside when ONE has enough cable pairs ??
Best regards, Eje Gustafsson mailto:[EMAIL PROTECTED] The Family Entertainment Network http://www.fament.com Phone : 620-231-7777 Fax : 620-231-4066 - Your Full Time Professionals - Mikrotik OEM -- Online store http://www.fament.net/ -- NP> How else you put power on the cat5? Remember, now you do not have the NP> need for the indoor PoE unit. NP> Nish NP> -----Original Message----- NP> From: [EMAIL PROTECTED] NP> [mailto:[EMAIL PROTECTED] On Behalf Of Eje Gustafsson NP> Sent: Saturday, August 23, 2003 12:03 PM NP> To: 'Nish Park' NP> Subject: Re: [smartBridges] smartBridges launches PoE Outdoor NP> So WHAT exactly is the point with the rj11 cable ? Sounds like a waste NP> to me if you can use the cat5. Not that a couple of rj11 connectors NP> are a lot of money but still not only are they a extra cost but the NP> fact that they are installed and wired means a little bit more work on NP> each unit and if you can use the cat5 cable..... Come one nobody will NP> hurt sB if you guys would say that one of your engineers had a brain NP> fart NP> and didn't think of using the cat5 going inside for power....!! NP> Best regards, NP> Eje Gustafsson mailto:[EMAIL PROTECTED] NP> The Family Entertainment Network http://www.fament.com NP> Phone : 620-231-7777 Fax : 620-231-4066 NP> - Your Full Time Professionals - NP> eBay UserID : macahan NP> --- NP> searchable smartBridges mailing list archive. NP> http://www.mail-archive.com/smartbridges40part-15.org/ NP> -- NP>> The external unit can be powered either through the CAT5 cable or NP> the NP>> separate RJ11 cable running to it. The supplied wall plate will put NP> the NP>> power on the CAT5 going outside and thus feed the power to the NP> outside NP>> unit. NP>> Nish NP>> -----Original Message----- NP>> From: [EMAIL PROTECTED] NP>> [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree NP>> Network NP>> Sent: Saturday, August 23, 2003 11:02 AM NP>> To: '[EMAIL PROTECTED]' NP>> Subject: RE: [smartBridges] smartBridges launches PoE Outdoor NP>> Huh.now I am stumped. I see that the POE unit is outside. So.if NP> only NP>> one CAT5 passes through the wall, how does the outside unit get NP> power?? NP>> You cant possibly be using the indoor POE unit to combine the signal NP> and NP>> power, then doing it again outside?? NP>> Sorry.I am just confused. NP>> Oh.and I don't use ANY flush mounts (too much work). I use ONLY the NP>> surface mount jacks. I also don't fish anyone's walls. That would NP> cost NP>> me too much in subcontractor fees. I run all cable outside, with NP> one NP>> penetration point where we put a surface mount RJ45 jack, then a NP> short NP>> CAT5 to the router/pc. NP>> Sully NP>> -----Original Message----- NP>> From: [EMAIL PROTECTED] NP>> [mailto:[EMAIL PROTECTED] NP>> Sent: Friday, August 22, 2003 7:42 PM NP>> To: [EMAIL PROTECTED] NP>> Subject: RE: [smartBridges] smartBridges launches PoE Outdoor NP>> Yes we are planning for the Flush mount. But I there is still time NP> to NP>> change. This can be changed even at a later time based on more user NP>> feedback. NP>> Based on the discussion on this forum a few days ago, we have NP> modified NP>> the mounting instructions such that only one CAT5 cable needs to go NP>> through the wall. NP>> Nish NP>> -----Original Message----- NP>> From: [EMAIL PROTECTED] NP>> [mailto:[EMAIL PROTECTED] On Behalf Of Chris Chance NP>> Sent: Saturday, August 23, 2003 7:43 AM NP>> To: '[EMAIL PROTECTED]' NP>> Subject: RE: [smartBridges] smartBridges launches PoE Outdoor NP>> I know this flush mount is not a good idea a surface box I would NP> think NP>> would make things easier... did the doc really say flush mount? I NP> hope NP>> not :( don't drill 2 holes use a 1/4 inch hole instead of 3/8 or NP> just go NP>> one side up to fit both inside. NP>> Chris NP>> -----Original Message----- NP>> From: The Wirefree Network [mailto:[EMAIL PROTECTED] NP>> Sent: Friday, August 22, 2003 11:42 AM NP>> To: [EMAIL PROTECTED] NP>> Here is my 2 cents on this product that is obviously already in NP>> production...too late to make suggestions I guess. NP>> I definitely LOVE the compliance factors...the self sensing power NP>> adjustment....and the protection! Much needed improvements!! NP>> I don't like the added work I have to do to mount/install NP>> this...mounting the box, drilling 2 holes, cutting a hole in there NP> wall NP>> for the flush mount plate, etc! I guess the client could still do a NP>> power reset from inside the home...that's okay. I also don't like NP> the NP>> power plug using Rj-11...but there really is not chance of hurting NP>> anything there. NP>> I personally use a surface mount RJ45 block for all my installs. I NP>> drill one small hole from the outside and mount the jack over the NP> top of NP>> the hole. Sure...flush mounts look nicer...but more work!! NP>> Sully NP>> -----Original Message----- NP>> From: Pallab Chakrabarti [mailto:[EMAIL PROTECTED] NP>> Sent: Friday, August 22, 2003 4:52 AM NP>> To: [EMAIL PROTECTED] NP>> Subject: smartBridges launches PoE Outdoor NP>> Hi NP>> smartBridges has introduced PoE Outdoor(tm), a unique concept of NP> dynamic NP>> Power over Ethernet for outdoor wireless installations. Please find NP>> attached the product brochure and the press release from NP> smartBridges. NP>> Please visit www.smartbridges.com/new/products/po.php for details on NP> the NP>> PoE Outdoor. NP>> Thanks NP>> smartBridges Global Marketing NP>> The PART-15.ORG smartBridges Discussion List NP>> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe NP>> smartBridges <yournickname> NP>> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe NP>> smartBridges) NP>> Archives: http://archives.part-15.org NP> -- NP> [This E-mail scanned for viruses by Declude Virus] NP> The PART-15.ORG smartBridges Discussion List NP> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe NP> smartBridges <yournickname> NP> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe NP> smartBridges) NP> Archives: http://archives.part-15.org NP> The PART-15.ORG smartBridges Discussion List NP> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> NP> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) NP> Archives: http://archives.part-15.org -- [This E-mail scanned for viruses by Declude Virus] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
