What's max irp for the AP side of it maybe he is concerned there too?
----- Original Message -----
From: "John Hokenson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 09, 2003 12:14 PM
Subject: Re: [smartBridges] How do I improve a link?
No it doesn't The power indication is incorrect. At max power you are only
putting out 17dBm
Radio +17dBM
Antenna +24dBm
EIRP 41dBm
Max EIRP allowed PtMP CPE 48dBm
JH
----- Original Message -----
From: "Cesar" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 09, 2003 10:29 AM
Subject: RE: [smartBridges] How do I improve a link?
> No, I don't have the power bar all the way to the top, on either radio,
> since that will put me above the FCC's stipulations.
>
>
> -C�sar
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless
> Sent: Tuesday, September 09, 2003 9:50 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [smartBridges] How do I improve a link?
>
> HMM once again I might have to agree you may be out of range do you have
> the
> power bar all the way up on the customer unit? Is the power setting all
> the
> way up on your APPO as well??
>
>
> ----- Original Message -----
> From: "Cesar" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, September 09, 2003 9:30 AM
> Subject: RE: [smartBridges] How do I improve a link?
>
>
> There are only two other APs available. One belongs to the customer,
> and the other one seems to be much weaker than mine. Also, I use
> channel 1 and the other two are using channel 11.
>
> -C�sar
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless
> Sent: Tuesday, September 09, 2003 9:23 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [smartBridges] How do I improve a link?
>
> HMM question when you go to site survey and click on choose from
> available
> access points are there any others listed besides yours?
>
> One other thing to try is switching channels I spent one night going
> from
> 1-11 and found those two great channels you may have to play around
> with
> them especially if there are other Access points around or near yours or
> the
> customer..
>
>
> ----- Original Message -----
> From: "Cesar" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, September 09, 2003 9:08 AM
> Subject: RE: [smartBridges] How do I improve a link?
>
>
> Sully,
>
> Here are the answers:
> 1. We are not using LMR, other than the pig tail that connects to the
> Outdoor Radio. We are just using the CAT5 for data and PoE.
> 2-3. The antenna is aligned properly, at least we like to think so.
> When we mounted it we made sure to set it where the strongest signal
> was. In other words we did play with the azimuth and elevation.
>
> As you can see we have played with it in order to optimize it as much as
> possible. I am running out of options and do NOT want to put an Amp.
> This is a very nice customer that has a farm way out in the country
> side--he has to generate his own power.
>
> Thanks Sully, and please let me know if you have any more
> ideas/suggestions.
>
> -C�sar
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree
> Network
> Sent: Tuesday, September 09, 2003 8:50 AM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] How do I improve a link?
>
> I am going to state a few more obvious points...because with those
> antennas, you should have a stronger RSSI at the client.
>
> 1. How much LMR cable (if any) are you using between the radio and the
> antennas? Hopefully you are not using LMR, just CAT5.
> 2. Is your Sector Antenna parallel to the earth or is it mechanically
> downtilted? Your RF may be falling short of the client.
> 3. After verifying the above, has your client antenna been properly
> aligned (tweaked)?
>
>
> Sully
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Cesar
> Sent: Tuesday, September 09, 2003 8:31 AM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] How do I improve a link?
>
> Sorry, I'm getting forgetful in my old age. The RSSI is 35% and the LQ
> is 65%.
>
> I'm using 90deg Sector Antennas, and yes he is within the RF path of the
> antenna.
>
> -C�sar
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree
> Network
> Sent: Tuesday, September 09, 2003 8:18 AM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] How do I improve a link?
>
> Did you state somewhere what the RSSI and LQ is? With that setup, you
> should be getting around 70% RSSI.
>
> What degree sector panel are you using? Does your client lie within the
> RF spread of the antenna?
>
> Need the RSSI/LQ to give more advice.
>
> Sully
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Cesar
> Sent: Tuesday, September 09, 2003 8:07 AM
> To: [EMAIL PROTECTED]
> Subject: [smartBridges] How do I improve a link?
>
> Hi everyone,
>
> I need your help/advice on improving a customer's connection. He is
> 10.5 miles away from my APPO (14.5 Sector antenna) and there is a clear
> LOS. He is using an Outdoor airBridge and a 24dBi grid antenna. At
> this point in time there are no amps involved, but I am seriously
> considering to install one at the clients site.
>
> Do you think that an Amp would solve the problem? Or do you have
> something in your bag of tricks that I can use?
>
> Any and all help will be greatly appreciated.
>
> TIA,
>
> -C�sar
>
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
