Oh sure Cesar....now you admit it. I asked you the very same thing over a day ago (scroll down).
Hahahha Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cesar Sent: Wednesday, September 10, 2003 12:05 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] How do I improve a link? Mark, Now that you mention it I may have down tilted the sector too much since I did not plan to have customers that far. I will try to raise it a bit. Thanks a mill -C�sar -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Koskenmaki Sent: Tuesday, September 09, 2003 11:51 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] How do I improve a link? At that distance, are you downtilted a bit much at the AP? What was your theoretical maximum signal level pointed it? NEOFAST.NET North East Oregon FAST Net mark(at)neofast.net ----- Original Message ----- From: Cesar <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, September 09, 2003 11:26 PM Subject: RE: [smartBridges] How do I improve a link? Thanks for pointing that out John, but while testing I did try it at full power and still did not help any. I will try elevating the antenna a bit more by putting a mast. -C�sar -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Hokenson Sent: Tuesday, September 09, 2003 12:15 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] How do I improve a link? No it doesn't The power indication is incorrect. At max power you are only putting out 17dBm Radio +17dBM Antenna +24dBm EIRP 41dBm Max EIRP allowed PtMP CPE 48dBm JH ----- Original Message ----- From: "Cesar" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, September 09, 2003 10:29 AM Subject: RE: [smartBridges] How do I improve a link? > No, I don't have the power bar all the way to the top, on either radio, > since that will put me above the FCC's stipulations. > > > -C�sar > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > Sent: Tuesday, September 09, 2003 9:50 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] How do I improve a link? > > HMM once again I might have to agree you may be out of range do you have > the > power bar all the way up on the customer unit? Is the power setting all > the > way up on your APPO as well?? > > > ----- Original Message ----- > From: "Cesar" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, September 09, 2003 9:30 AM > Subject: RE: [smartBridges] How do I improve a link? > > > There are only two other APs available. One belongs to the customer, > and the other one seems to be much weaker than mine. Also, I use > channel 1 and the other two are using channel 11. > > -C�sar > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > Sent: Tuesday, September 09, 2003 9:23 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] How do I improve a link? > > HMM question when you go to site survey and click on choose from > available > access points are there any others listed besides yours? > > One other thing to try is switching channels I spent one night going > from > 1-11 and found those two great channels you may have to play around > with > them especially if there are other Access points around or near yours or > the > customer.. > > > ----- Original Message ----- > From: "Cesar" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, September 09, 2003 9:08 AM > Subject: RE: [smartBridges] How do I improve a link? > > > Sully, > > Here are the answers: > 1. We are not using LMR, other than the pig tail that connects to the > Outdoor Radio. We are just using the CAT5 for data and PoE. > 2-3. The antenna is aligned properly, at least we like to think so. > When we mounted it we made sure to set it where the strongest signal > was. In other words we did play with the azimuth and elevation. > > As you can see we have played with it in order to optimize it as much as > possible. I am running out of options and do NOT want to put an Amp. > This is a very nice customer that has a farm way out in the country > side--he has to generate his own power. > > Thanks Sully, and please let me know if you have any more > ideas/suggestions. > > -C�sar > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Tuesday, September 09, 2003 8:50 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] How do I improve a link? > > I am going to state a few more obvious points...because with those > antennas, you should have a stronger RSSI at the client. > > 1. How much LMR cable (if any) are you using between the radio and the > antennas? Hopefully you are not using LMR, just CAT5. > 2. Is your Sector Antenna parallel to the earth or is it mechanically > downtilted? Your RF may be falling short of the client. > 3. After verifying the above, has your client antenna been properly > aligned (tweaked)? > > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Cesar > Sent: Tuesday, September 09, 2003 8:31 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] How do I improve a link? > > Sorry, I'm getting forgetful in my old age. The RSSI is 35% and the LQ > is 65%. > > I'm using 90deg Sector Antennas, and yes he is within the RF path of the > antenna. > > -C�sar > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Tuesday, September 09, 2003 8:18 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] How do I improve a link? > > Did you state somewhere what the RSSI and LQ is? With that setup, you > should be getting around 70% RSSI. > > What degree sector panel are you using? Does your client lie within the > RF spread of the antenna? > > Need the RSSI/LQ to give more advice. > > Sully > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Cesar > Sent: Tuesday, September 09, 2003 8:07 AM > To: [EMAIL PROTECTED] > Subject: [smartBridges] How do I improve a link? > > Hi everyone, > > I need your help/advice on improving a customer's connection. He is > 10.5 miles away from my APPO (14.5 Sector antenna) and there is a clear > LOS. He is using an Outdoor airBridge and a 24dBi grid antenna. At > this point in time there are no amps involved, but I am seriously > considering to install one at the clients site. > > Do you think that an Amp would solve the problem? Or do you have > something in your bag of tricks that I can use? > > Any and all help will be greatly appreciated. > > TIA, > > -C�sar > > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.515 / Virus Database: 313 - Release Date: 9/2/03 ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
