never mind I found it $150 but for that can you specify what speeds the ports are set to?
----- Original Message ----- From: "Blazen Wireless" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, September 29, 2003 5:02 PM Subject: Re: [smartBridges] Slow down problems Do you have a price on this unit I cant find it anywhere on their site? ----- Original Message ----- From: "Ole Bj�rklund" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, September 27, 2003 3:37 PM Subject: RE: [smartBridges] Slow down problems Hi! The ADAM 6520 is a 5 port 10/100 switch very suitable to fit into a NEMA box! 5-port Industrial 10/100Mbps Ethernet Switch Main Features Supports 5-port 10/100 Mbps RJ-45 connectors Supports full/half duplex flow control Supports + 10 ~ 30 VDC voltage Provides surge protection 3000 VDC Provides robust mountings: DIN rail, panel, piggy-back Supports operating temperature from -10 ~ 70 C Best Regards Oleb -----Original Message----- From: Martin Moreno [mailto:[EMAIL PROTECTED] Sent: 27. september 2003 17:46 To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Slow down problems Oleb, all I see here is RS-232 to ethernet converters?? no switches unless I am missing them? Do you haev a model # that you use I will keep looking.. Thanks Martin Quoting Ole Bj�rklund <[EMAIL PROTECTED]>: > > Hi1 > > We are using the industrial switches from Advantech in our enclosures > and have never had problems with connecting the SB stuff to those > switches? > > Small, runs on 10 - 30 VDC, auto MDI/MDX and handles -10 - +70 deg. > celsius > http://www.advantech.com/products/Model_Detail.asp?model_id=1-D6FQZ&bu > = > > Oleb > > > -----Original Message----- > From: Blazen Wireless [mailto:[EMAIL PROTECTED] > Sent: 27. september 2003 01:40 > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Slow down problems > > > > thats great to hear but what type of switches are you using that allow > you to configure them? We seem to be at a crossroads as to finding an > inexpensive switch that is small to fit in a nema type enclosure.. > > > ----- Original Message ----- > From: "S�mundur Johannsson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, September 26, 2003 4:23 PM > Subject: Re: [smartBridges] Slow down problems > > > Hi we had same problem with our costumers few weeks back, We had > advice from SB in the past to have all switches on the wireless > network on Auto. But when we put the switches to 10 half we have much > faster internet connection to our costumers and no problems,,,,, > > S�mundur J > > > > > Well to be quite honest I don't have speed problems its more of > > capacity problems at the tower from what I can tell. Its the APPO's > > that cant handle the traffic maybe because my Dlink switch up there > > cant handle it I don't know. All I know is when I had the AP-100 up > > there I just plugged my Cat 5 from my BH into the AP-1000 and I was > > done no switch to dick with. > > > > How hard would it be to make a 100Mb LAN on the APPO's only I don't > > know but I cant keep messing with crap any longer at the expense of my > > > customers. I had something that worked good and was told these > > APPO's > > would be better I had my doubts and should have listened to my gut! > > > > I mean why make something with an Ethernet connection with it so > > slow > > isn't standard at least now 100mB or gigabit speeds possible more > > expense in the chip to upgrade?. The canopy has 100mb, I believe > > trango does and so does the AP-1000 why bottleneck your system > > especially at the AP? > > > > > > ----- Original Message ----- > > From: "Kevin Summers" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, September 26, 2003 4:01 PM > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > I sympathize. I just did the same thing. Replaced the ABO at the > > client site with another brand of client bridge and all the problems > > went away and the throughput doubled. > > > > It turned out to be the fact that the Ethernet on the SB radios is > > Half Duplex, which I can't seem to find anything that doesn't cost > > $275 or more that supports that setting. Even the so called "managed" > > switches that I paid $88 each for say in their manual that they don't > > support 10Mbit Half Duplex. THAT is where I think the slowdown, and > > the problems are coming from. > > > > The radio that I replaced the ABO with has an Ethernet jack that is > > 100Mbit Full Duplex. I just think the wireless card in the radio is > > capable of switching from send to receive and back faster than the > > Ethernet chipset that SB is using. > > > > Kevin Summers > > KISTech Internet Services Inc. > > www.kistech.com > > > > > > > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless > >> Sent: Friday, September 26, 2003 3:47 PM > >> To: [EMAIL PROTECTED] > >> Subject: Re: [smartBridges] Slow down problems > >> > >> > >> Well I have made up my mind I am going to buy an AP-1000 and throw > >> it > > >> back up on the tower which means I will have to get two more > >> Ap-1000's to replace > >> at my other remote wipops that feed off the main APPO's! and swap 3 > >> APPO's > >> at customers homes to an ABO or ABI since they wont pass traffic > unless > >> associated to another appo! > >> > >> Money I dont have but I cant take this anymore I really feel its > >> the > >> radios but not opposed to any other suggestions on what it could be? > >> > >> I am tired of trouble shooting left and right everytime I get 5-6 > >> customers online at once.. > >> > >> > >> ----- Original Message ----- > >> From: "Brendan O'Bra" <[EMAIL PROTECTED]> > >> To: <[EMAIL PROTECTED]> > >> Sent: Friday, September 26, 2003 3:20 PM > >> Subject: Re: [smartBridges] Slow down problems > >> > >> > >> Stupid question, but... > >> > >> Have you tried taking the demarctech box out of the loop? > >> ----- Original Message ----- > >> From: "Blazen Wireless" <[EMAIL PROTECTED]> > >> To: <[EMAIL PROTECTED]> > >> Sent: Friday, September 26, 2003 3:12 PM > >> Subject: Re: [smartBridges] Slow down problems > >> > >> > >> > I am using the bandwidth controller software from > >> > www.demarctech.com > >> > > >> > Isn't setting RTS to one going to shut down the customer?? > >> > > >> > > >> > ----- Original Message ----- > >> > From: "Kevin Summers" <[EMAIL PROTECTED]> > >> > To: <[EMAIL PROTECTED]> > >> > Sent: Friday, September 26, 2003 3:10 PM > >> > Subject: RE: [smartBridges] Slow down problems > >> > > >> > > >> > > >> > Also, how are you throttling bandwidth per customer? > >> > > >> > Kevin Summers > >> > KISTech Internet Services Inc. > >> > www.kistech.com > >> > > >> > > >> > > >> > > >> > > -----Original Message----- > >> > > From: [EMAIL PROTECTED] > >> > > [mailto:[EMAIL PROTECTED] Behalf Of Blazen > >> > > Wireless > >> > > Sent: Friday, September 26, 2003 3:01 PM > >> > > To: [EMAIL PROTECTED] > >> > > Subject: Re: [smartBridges] Slow down problems > >> > > > >> > > > >> > > I also forgot to mention I throttled the one big user down to > >> 100kbps > >> and > >> > > same think its like it has a hold on the APPO at 11 megs (5.5) > >> > > and wont let anything else talk to it?? > >> > > > >> > > > >> > > ----- Original Message ----- > >> > > From: "Blazen Wireless" <[EMAIL PROTECTED]> > >> > > To: <[EMAIL PROTECTED]> > >> > > Sent: Friday, September 26, 2003 2:59 PM > >> > > Subject: Re: [smartBridges] Slow down problems > >> > > > >> > > > >> > > Okay this slow down is really killing me I have all users > >> > > turned > >> > > off > >> that > >> > > appear to be sending any kind of arp but this was not what was > >> causing > >> the > >> > > slowdowns. I have two users on right now one downloading at > >> > > 700kbps and the other one my slow customer just trying to surf > >> > > and cant due it due > >> to > >> ping > >> > > rates we beyond out of control 300-400 and packet loss. > >> > > > >> > > I turn off the one customer who is downloading and the > >> problem resolves. > >> I > >> > > called the customer downloading and they are doing Microsoft > >> patches on > >> > > their machines right now so its not a virus. What gives why can > >> > > one > >> person > >> > > not taking up the full bandwidth screw the whole system I > >> mean every one > >> > > else is at a dead stand still?? > >> > > > >> > > To me this is a problem in the radio APPO not being able to > >> talk to two > >> > > radios at the same time at two different speeds this thing is > >> totally > >> just > >> > > sh**ing all over itself? > >> > > > >> > > Anyone else see this happen I had the APPO set to 1 meg only 2 > >> > > meg > >> and > >> 5.5 > >> > > and also 11 but nothing seems to help! I have RTS set to 800 on > >> > > the clients and that made no difference I give up this customer > >> > > wants me to come > >> pull > >> > > the equipment.. > >> > > > >> > > Any ideas? > >> > > HELP! > >> > > ----- Original Message ----- > >> > > From: "Mark Radabaugh" <[EMAIL PROTECTED]> > >> > > To: <[EMAIL PROTECTED]> > >> > > Sent: Wednesday, September 24, 2003 6:02 PM > >> > > Subject: Re: [smartBridges] Slow down problems > >> > > > >> > > > >> > > This can get tricky. You need to be on a port that sees all of > >> > > the traffic - read that as 'not a switch port'. By definition a > >> switch will > >> > > only show you packets destined for your computer. > >> > > > >> > > If you really want to see what going on you need a hub or a > >> > > managed > >> switch > >> > > that can replicate all traffic onto a port. > >> > > > >> > > Another option is to use a wireless card in promiscious mode - > >> > > a > >> > > mode where > >> > > you see all of the traffic. Ethereal will do this with (I > >> think) most > >> > > common wireless cards. > >> > > > >> > > Mark Radabaugh > >> > > Amplex > >> > > (419) 720-3635 > >> > > > >> > > ----- Original Message ----- > >> > > From: "Pascal Losier" <[EMAIL PROTECTED]> > >> > > To: <[EMAIL PROTECTED]> > >> > > Sent: Wednesday, September 24, 2003 5:41 PM > >> > > Subject: RE: [smartBridges] Slow down problems > >> > > > >> > > > >> > > > > >> > > > Just a small question, > >> > > > > >> > > > When running ethereal, Do you run it directly on the router > >> > > > (ex.Mikrotik) or on any system connected to the router. > >> > > > > >> > > > Also does it matter if the system running ethereal is log via > >> PPPOE > >> ???? > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > -----Original Message----- > >> > > > From: [EMAIL PROTECTED] > >> > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > >> Wireless > >> > > > Sent: Wednesday, September 24, 2003 6:12 PM > >> > > > To: [EMAIL PROTECTED] > >> > > > Subject: Re: [smartBridges] Slow down problems > >> > > > > >> > > > > >> > > > HAHA well then my router has the virus I get like over 2000 > >> > > > arp > >> request > >> > > > from the router in less then 20 min which I think is way out > >> > > > of > >> control > >> > > > it always is asking who has what IP etc. I was told this is > >> normal in > >> > > > order for the router to know what IP has what mac etc.. > >> > > > > >> > > > ----- Original Message ----- > >> > > > From: "Scott Damron" <[EMAIL PROTECTED]> > >> > > > To: <[EMAIL PROTECTED]> > >> > > > Sent: Wednesday, September 24, 2003 12:15 PM > >> > > > Subject: RE: [smartBridges] Slow down problems > >> > > > > >> > > > > >> > > > A WHOLE bunch of arp requests. If you run ethereal, you > >> > > > would > >> > > > see upwards of 30 or 40% ARP requests. Some of the viruses > >> > > > cause ARP storms. > >> > > > > >> > > > Scott > >> > > > > >> > > > -----Original Message----- > >> > > > From: [EMAIL PROTECTED] > >> > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > >> Wireless > >> > > > Sent: Wednesday, September 24, 2003 12:09 PM > >> > > > To: [EMAIL PROTECTED] > >> > > > Subject: Re: [smartBridges] Slow down problems > >> > > > > >> > > > > >> > > > What do you mean check arp I know how to check it but what am > >> > > > I > >> looking > >> > > > for?? > >> > > > > >> > > > > >> > > > ----- Original Message ----- > >> > > > From: "Scott Damron" <[EMAIL PROTECTED]> > >> > > > To: <[EMAIL PROTECTED]> > >> > > > Sent: Wednesday, September 24, 2003 11:37 AM > >> > > > Subject: RE: [smartBridges] Slow down problems > >> > > > > >> > > > > >> > > > Check ARP. > >> > > > > >> > > > Scott > >> > > > > >> > > > -----Original Message----- > >> > > > From: [EMAIL PROTECTED] > >> > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > >> Wireless > >> > > > Sent: Wednesday, September 24, 2003 11:17 AM > >> > > > To: [EMAIL PROTECTED] > >> > > > Subject: Re: [smartBridges] Slow down problems > >> > > > > >> > > > > >> > > > I have done that already and there is no ICMP other then me > >> pinging > >> the > >> > > > radios It doesn't happen when there is no one online it only > >> happens > >> > > > when a few close users get on and start to surf and then > >> the far users > >> > > > have a hard time with dropped packets and slow speeds and > >> high pings. > >> I > >> > > > just thing I need to open up another AP closer to them and > >> > > > keep > > >> > > > my distance down to under 5 miles. The one person having the > >> hardest time > >> > > > is about 5.6 miles which is closer then my 7.2 mile customer > >> > > > who > >> is > >> > > > doing great and pointed at the same radio APPO. It might > >> just be this > >> > > > person is in a bad area with more interference is what I am > >> thinking > >> and > >> > > > I also may need to raise her ant a smidge.. > >> > > > > >> > > > > >> > > > ----- Original Message ----- > >> > > > From: <[EMAIL PROTECTED]> > >> > > > To: <[EMAIL PROTECTED]> > >> > > > Sent: Wednesday, September 24, 2003 11:47 AM > >> > > > Subject: Re: [smartBridges] Slow down problems > >> > > > > >> > > > > >> > > > Every time I've experienced interference (numerous times), it > >> hasn't > >> > > > affected ping times. From what I've seen, it usually causes > >> > > > lost packets, but not high latency. I don't know if anyone has > >> mentioned > >> > > > this before (I jumped in in the middle of this thread), but > >> > > > what > >> you're > >> > > > describing sounds exactly like something I experienced a few > >> > > > weeks > >> ago. > >> > > > I had about six users with the Welchia virus, and they were > >> causing > >> high > >> > > > latency all over the network. If you haven't done it > >> > > > already, > >> > > > put > >> a > >> > > > packet sniffer on the network, and see if you're seeing a > >> lot of icmp > >> > > > echo traffic. > >> > > > > >> > > > Craig > >> > > > > >> > > > > >> > > > Quoting Blazen Wireless <[EMAIL PROTECTED]>: > >> > > > > >> > > > > Well maybe this is not the problem now I am back to the > >> same issues > >> > > > > pings up to over 100ms and it seems now more with radios > >> that never > >> > > > > had problems before I am thinking more of interference > >> now? How many > >> > > > > of you have seen a drastic increase in SOHO wireless > >> routers popping > >> > > > > up on your site survey tab when setting up a customer, I > >> > > > > s**t > >> you > >> not > >> > > > > one the other day had 11 > >> > > > that > >> > > > > all > >> > > > > said linksys or the default ssid for dlink stuff. Are those > >> > > > manufacturers > >> > > > > within spec it seems more and more are popping up and some > >> > > > > with > >> better > >> > > > > >> > > > > signal then my tower according to the site survey numbers > >> in the ABO > >> > > > /ABI > >> > > > > > >> > > > > > >> > > > > ----- Original Message ----- > >> > > > > From: "Scott Damron" <[EMAIL PROTECTED]> > >> > > > > To: <[EMAIL PROTECTED]> > >> > > > > Sent: Wednesday, September 24, 2003 9:07 AM > >> > > > > Subject: RE: [smartBridges] Slow down problems > >> > > > > > >> > > > > > >> > > > > Actually, it does not really drop everyone down to 1meg, it > >> > > > > just > >> _MAY_ > >> > > > > >> > > > > slow down the 11meg folks in order to respond to the 1meg > >> person. > >> Hope > >> > > > > >> > > > > that makes sense. > >> > > > > > >> > > > > Scott > >> > > > > -----Original Message----- > >> > > > > From: [EMAIL PROTECTED] > >> > > > > [mailto:[EMAIL PROTECTED] On Behalf Of The > >> Wirefree > >> > > > > Network > >> > > > > Sent: Wednesday, September 24, 2003 9:08 AM > >> > > > > To: [EMAIL PROTECTED] > >> > > > > Subject: RE: [smartBridges] Slow down problems > >> > > > > > >> > > > > > >> > > > > Huh!??!? This seems bass ackwards. If one client > >> > > > > associates > > >> > > > > at > >> 1 > >> > > > > Meg, it drops everyone down to that speed. Not the other > >> > > > > way > >> around. > >> > > > > Weakest link theory. If a client can not associate at 11 > >> > > > > Meg > >> and > >> > > > > steps it's way down to 1 Meg, then it CAN NOT be forced to > >> connect > >> at > >> > > > > 11 Meg. However, a client who is close in with 100% RSSI, > >> > > > > could > >> be > >> > > > > stepped down to 1 Meg based on some far out client. > >> > > > > > >> > > > > Sully > >> > > > > > >> > > > > -----Original Message----- > >> > > > > From: [EMAIL PROTECTED] > >> > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > >> Blazen Wireless > >> > > > > Sent: Tuesday, September 23, 2003 11:56 PM > >> > > > > To: [EMAIL PROTECTED] > >> > > > > Subject: Re: [smartBridges] Slow down problems > >> > > > > > >> > > > > I have throttling in place now thats not the issue. The > >> issue is in > >> my > >> > > > > >> > > > > opinion and theory is at what rate the radios associate > >> at.. If they > >> > > > > are only associating at 1 meg or less then yes you will > >> > > > > have > >> > > > > throughput problems, if I have all my close customers able to > > >> > > > > associate at 11 megs > >> > > > > (5.5) and my furthest customers only at 1 meg ( 500kbps) > >> > > > > then > >> the > >> > > > > further users are not going to be able to associate at 1 > >> > > > > meg > >> > > > > but > >> will > >> > > > be > >> > > > > forced to associate at 11 megs and since that is not a > >> > > > > stable > >> link > >> > > > they > >> > > > > will suffer as I kind of proved tonight but cant be 100% > >> sure unless > >> I > >> > > > > >> > > > > could verify what speed the users radios are associating at > >> > > > > to > >> the > >> AP. > >> > > > > >> > > > > In theory the AP cant be associated to 3 to 4 radios all at > >> different > >> > > > > speeds. They will be associated at the speed of the > >> slowest radio or > >> > > > the > >> > > > > fastest depending on what radio has the best link I think? > >> > > > > > >> > > > > ----- Original Message ----- > >> > > > > From: Vasu (sB Tech Team) > >> > > > > To: [EMAIL PROTECTED] > >> > > > > Sent: Tuesday, September 23, 2003 11:27 PM > >> > > > > Subject: RE: [smartBridges] Slow down problems > >> > > > > > >> > > > > That's the basics of 802.11 std, when one user hogs the > >> > > > > entire bandwidth the remaining users have to share the > >> > > > > bandwidth, hence bandwidth throttling is important to ensure > >> > > > > good and > >> stable links to > >> > > > > all users, I think the XO series access point should solve > >> > > > > your problem which can provide dedicated bandwidth to every > >> > > > > user. > >> > > > > > >> > > > > Vasu > >> > > > > -----Original Message----- > >> > > > > From: [EMAIL PROTECTED] > >> > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > >> Blazen Wireless > >> > > > > Sent: Wednesday, September 24, 2003 2:02 PM > >> > > > > To: '[EMAIL PROTECTED]' > >> > > > > Subject: [smartBridges] Slow down problems > >> > > > > > >> > > > > Okay I think I have figured out the problem with my > >> system. It seems > >> > > > > that when users are one (close users) they are associated > >> > > > > to > >> > > > > the > >> APPO > >> > > > > at 5.5 to 11 megs possibly and the users that are further > >> > > > > away > >> are > >> at > >> > > > > 1 meg max well if you have the near users at 11 megs tying > >> > > > > up > >> the > >> > > > > radio and the far uses cant connect at a slower speed for a > >> better > >> > > > > link / speed quality then the far users suffer? am I > >> > > > > correct > >> > > > > in > >> my > >> > > > > theory does that make any sense? > >> > > > > > >> > > > > So going forward we are going to have to plan some more > >> sites closer > >> > > > > to the users having issues etc Has anyone else experienced > >> > > > > this. > >> I > >> > > > > cant verify 100% that this is true due to the fact the > >> radios don't > >> > > > > report what speed they are associated at? Can someone > >> think of a way > >> > > > > to validate this theory?? > >> > > > > > >> > > > > Thanks > >> > > > > > >> > > > > Martin & Steve > >> > > > > Blazen Wireless > >> > > > > www.blazenwireless.com > >> > > > > > >> > > > > > >> > > > > ----------ANNOUNCEMENT---------- > >> > > > > Don't forget to register for WISPCON IV > >> > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > > >> > > > > The PART-15.ORG smartBridges Discussion List > >> > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > > subscribe smartBridges <yournickname> To Remove: > >> mailto:[EMAIL PROTECTED] > >> (in > >> > > > > >> > > > > the body type unsubscribe > >> > > > > smartBridges) > >> > > > > Archives: http://archives.part-15.org > >> > > > > > >> > > > > > >> > > > > ----------ANNOUNCEMENT---------- > >> > > > > Don't forget to register for WISPCON IV > >> > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > > >> > > > > The PART-15.ORG smartBridges Discussion List > >> > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > > subscribe > >> > > > smartBridges > >> > > > > <yournickname> > >> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > >> unsubscribe > >> > > > > smartBridges) > >> > > > > Archives: http://archives.part-15.org > >> > > > > > >> > > > > > >> > > > > >> > > > > >> > > > ----------ANNOUNCEMENT---------- > >> > > > Don't forget to register for WISPCON IV > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > >> > > > The PART-15.ORG smartBridges Discussion List > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > subscribe smartBridges <yournickname> To Remove: > >> mailto:[EMAIL PROTECTED] (in > >> > > > the body type unsubscribe > >> > > > smartBridges) > >> > > > Archives: http://archives.part-15.org > >> > > > > >> > > > > >> > > > ----------ANNOUNCEMENT---------- > >> > > > Don't forget to register for WISPCON IV > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > >> > > > The PART-15.ORG smartBridges Discussion List > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > subscribe smartBridges <yournickname> To Remove: > >> mailto:[EMAIL PROTECTED] (in > >> > > > the body type unsubscribe smartBridges) > >> > > > Archives: http://archives.part-15.org > >> > > > > >> > > > > >> > > > ----------ANNOUNCEMENT---------- > >> > > > Don't forget to register for WISPCON IV > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > >> > > > The PART-15.ORG smartBridges Discussion List > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > subscribe smartBridges <yournickname> To Remove: > >> mailto:[EMAIL PROTECTED] (in > >> > > > the body type unsubscribe > >> > > > smartBridges) > >> > > > Archives: http://archives.part-15.org > >> > > > > >> > > > > >> > > > ----------ANNOUNCEMENT---------- > >> > > > Don't forget to register for WISPCON IV > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > >> > > > The PART-15.ORG smartBridges Discussion List > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > subscribe smartBridges <yournickname> To Remove: > >> mailto:[EMAIL PROTECTED] (in > >> > > > the body type unsubscribe smartBridges) > >> > > > Archives: http://archives.part-15.org > >> > > > > >> > > > > >> > > > ----------ANNOUNCEMENT---------- > >> > > > Don't forget to register for WISPCON IV > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > >> > > > The PART-15.ORG smartBridges Discussion List > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > subscribe smartBridges <yournickname> To Remove: > >> mailto:[EMAIL PROTECTED] (in > >> > > > the body type unsubscribe > >> > > > smartBridges) > >> > > > Archives: http://archives.part-15.org > >> > > > > >> > > > > >> > > > ----------ANNOUNCEMENT---------- > >> > > > Don't forget to register for WISPCON IV > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > >> > > > The PART-15.ORG smartBridges Discussion List > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > subscribe smartBridges <yournickname> To Remove: > >> mailto:[EMAIL PROTECTED] (in > >> > > > the body type unsubscribe smartBridges) > >> > > > Archives: http://archives.part-15.org > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > ----------ANNOUNCEMENT---------- > >> > > > Don't forget to register for WISPCON IV > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > > >> > > > The PART-15.ORG smartBridges Discussion List > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > > subscribe > >> > > smartBridges <yournickname> > >> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > >> unsubscribe > >> > > smartBridges) > >> > > > Archives: http://archives.part-15.org > >> > > > > >> > > > >> > > > >> > > ----------ANNOUNCEMENT---------- > >> > > Don't forget to register for WISPCON IV > >> > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > >> > > The PART-15.ORG smartBridges Discussion List > >> > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > subscribe > >> > > smartBridges <yournickname> To Remove: > >> > > mailto:[EMAIL PROTECTED] (in the body type unsubscribe > >> > > smartBridges) > >> > > Archives: http://archives.part-15.org > >> > > > >> > > > >> > > ----------ANNOUNCEMENT---------- > >> > > Don't forget to register for WISPCON IV > >> > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > > >> > > The PART-15.ORG smartBridges Discussion List > >> > > To Join: mailto:[EMAIL PROTECTED] (in the body type > >> > > subscribe > >> > > smartBridges <yournickname> To Remove: > >> > > mailto:[EMAIL PROTECTED] (in the body type unsubscribe > >> > > smartBridges) > >> > > Archives: http://archives.part-15.org > >> > > >> > ----------ANNOUNCEMENT---------- > >> > Don't forget to register for WISPCON IV > >> > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > >> > The PART-15.ORG smartBridges Discussion List > >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > >> > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > >> > (in the body type unsubscribe > >> > smartBridges) > >> > Archives: http://archives.part-15.org > >> > > >> > > >> > ----------ANNOUNCEMENT---------- > >> > Don't forget to register for WISPCON IV > >> > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > > >> > The PART-15.ORG smartBridges Discussion List > >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > >> smartBridges <yournickname> > >> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > >> > unsubscribe > >> smartBridges) > >> > Archives: http://archives.part-15.org > >> > > >> > >> ----------ANNOUNCEMENT---------- > >> Don't forget to register for WISPCON IV > >> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > >> The PART-15.ORG smartBridges Discussion List > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > >> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > >> (in the body type unsubscribe > >> smartBridges) > >> Archives: http://archives.part-15.org > >> > >> > >> ----------ANNOUNCEMENT---------- > >> Don't forget to register for WISPCON IV > >> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > >> > >> The PART-15.ORG smartBridges Discussion List > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > >> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > >> (in the body type unsubscribe smartBridges) > >> Archives: http://archives.part-15.org > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > > > the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > > > the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > S�mundur Johannsson Technician > eMax Wireless Internet > Hlidasmari 8 > 201 Kopavogur Iceland > Tel :(354) 5444454 > FAX :(354) 5444453 > www.emax.is > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > ** This message does not contain any viruses - scanned by Elektron and > Webconnect virusscanner ** > > ** This message does not contain any viruses - scanned by Elektron and > Webconnect virusscanner ** > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ** This message does not contain any viruses - scanned by Elektron and Webconnect virusscanner ** ** This message does not contain any viruses - scanned by Elektron and Webconnect virusscanner ** ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
