So you can confirm it detects at 10 meg 1/2 duplex? How can you know for sure does it have diagnostic LED's on it to determine what speed you are connected at?
Is this a DC unit only? and if so what voltage I would think I would need some kind of converter from AC to DC... Quoting Ole Bj�rklund <[EMAIL PROTECTED]>: > > Hi! > > It's an unmanaged switch, but it detects our SB units correctly > as far as I can tell. We have not had anny issues with the > Advantech switches and SB gear? > > Best Regards > Oleb > > > -----Original Message----- > From: Blazen Wireless [mailto:[EMAIL PROTECTED] > Sent: 30. september 2003 02:05 > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Slow down problems > > > > never mind I found it $150 but for that can you specify what speeds the > ports are set to? > > ----- Original Message ----- > From: "Blazen Wireless" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, September 29, 2003 5:02 PM > Subject: Re: [smartBridges] Slow down problems > > > Do you have a price on this unit I cant find it anywhere on their site? > > ----- Original Message ----- > From: "Ole Bj�rklund" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, September 27, 2003 3:37 PM > Subject: RE: [smartBridges] Slow down problems > > > > Hi! > > The ADAM 6520 is a 5 port 10/100 switch very suitable to fit into a NEMA > box! > > 5-port Industrial 10/100Mbps Ethernet Switch > Main Features > Supports 5-port 10/100 Mbps RJ-45 connectors > Supports full/half duplex flow control > Supports + 10 ~ 30 VDC voltage > Provides surge protection 3000 VDC > Provides robust mountings: DIN rail, panel, piggy-back > Supports operating temperature from -10 ~ 70 C > Best Regards > Oleb > > > -----Original Message----- > From: Martin Moreno [mailto:[EMAIL PROTECTED] > Sent: 27. september 2003 17:46 > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Slow down problems > > > > Oleb, > > all I see here is RS-232 to ethernet converters?? no switches unless I > am missing them? Do you haev a model # that you use I will keep > looking.. > > Thanks > > Martin > > Quoting Ole Bj�rklund <[EMAIL PROTECTED]>: > > > > > Hi1 > > > > We are using the industrial switches from Advantech in our enclosures > > and have never had problems with connecting the SB stuff to those > > switches? > > > > Small, runs on 10 - 30 VDC, auto MDI/MDX and handles -10 - +70 deg. > > celsius > > http://www.advantech.com/products/Model_Detail.asp?model_id=1-D6FQZ&bu > > = > > > > Oleb > > > > > > -----Original Message----- > > From: Blazen Wireless [mailto:[EMAIL PROTECTED] > > Sent: 27. september 2003 01:40 > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > thats great to hear but what type of switches are you using that allow > > > you to configure them? We seem to be at a crossroads as to finding an > > inexpensive switch that is small to fit in a nema type enclosure.. > > > > > > ----- Original Message ----- > > From: "S�mundur Johannsson" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, September 26, 2003 4:23 PM > > Subject: Re: [smartBridges] Slow down problems > > > > > > Hi we had same problem with our costumers few weeks back, We had > > advice from SB in the past to have all switches on the wireless > > network on Auto. But when we put the switches to 10 half we have much > > faster internet connection to our costumers and no problems,,,,, > > > > S�mundur J > > > > > > > > > Well to be quite honest I don't have speed problems its more of > > > capacity problems at the tower from what I can tell. Its the APPO's > > > that cant handle the traffic maybe because my Dlink switch up there > > > cant handle it I don't know. All I know is when I had the AP-100 up > > > there I just plugged my Cat 5 from my BH into the AP-1000 and I was > > > done no switch to dick with. > > > > > > How hard would it be to make a 100Mb LAN on the APPO's only I don't > > > know but I cant keep messing with crap any longer at the expense of > my > > > > > customers. I had something that worked good and was told these > > > APPO's would be better I had my doubts and should have listened to > > > my gut! > > > > > > I mean why make something with an Ethernet connection with it so > > > slow isn't standard at least now 100mB or gigabit speeds possible > > > more expense in the chip to upgrade?. The canopy has 100mb, I > > > believe trango does and so does the AP-1000 why bottleneck your > > > system especially at the AP? > > > > > > > > > ----- Original Message ----- > > > From: "Kevin Summers" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Friday, September 26, 2003 4:01 PM > > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > > > > > I sympathize. I just did the same thing. Replaced the ABO at the > > > client site with another brand of client bridge and all the problems > > > > went away and the throughput doubled. > > > > > > It turned out to be the fact that the Ethernet on the SB radios is > > > Half Duplex, which I can't seem to find anything that doesn't cost > > > $275 or more that supports that setting. Even the so called > "managed" > > > switches that I paid $88 each for say in their manual that they > don't > > > support 10Mbit Half Duplex. THAT is where I think the slowdown, and > > > the problems are coming from. > > > > > > The radio that I replaced the ABO with has an Ethernet jack that is > > > 100Mbit Full Duplex. I just think the wireless card in the radio is > > > capable of switching from send to receive and back faster than the > > > Ethernet chipset that SB is using. > > > > > > Kevin Summers > > > KISTech Internet Services Inc. > > > www.kistech.com > > > > > > > > > > > > > > >> -----Original Message----- > > >> From: [EMAIL PROTECTED] > > >> [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless > > >> Sent: Friday, September 26, 2003 3:47 PM > > >> To: [EMAIL PROTECTED] > > >> Subject: Re: [smartBridges] Slow down problems > > >> > > >> > > >> Well I have made up my mind I am going to buy an AP-1000 and throw > > >> it > > > > >> back up on the tower which means I will have to get two more > > >> Ap-1000's to replace at my other remote wipops that feed off the > > >> main APPO's! and swap 3 APPO's > > >> at customers homes to an ABO or ABI since they wont pass traffic > > unless > > >> associated to another appo! > > >> > > >> Money I dont have but I cant take this anymore I really feel its > > >> the radios but not opposed to any other suggestions on what it > > >> could > be? > > >> > > >> I am tired of trouble shooting left and right everytime I get 5-6 > > >> customers online at once.. > > >> > > >> > > >> ----- Original Message ----- > > >> From: "Brendan O'Bra" <[EMAIL PROTECTED]> > > >> To: <[EMAIL PROTECTED]> > > >> Sent: Friday, September 26, 2003 3:20 PM > > >> Subject: Re: [smartBridges] Slow down problems > > >> > > >> > > >> Stupid question, but... > > >> > > >> Have you tried taking the demarctech box out of the loop? > > >> ----- Original Message ----- > > >> From: "Blazen Wireless" <[EMAIL PROTECTED]> > > >> To: <[EMAIL PROTECTED]> > > >> Sent: Friday, September 26, 2003 3:12 PM > > >> Subject: Re: [smartBridges] Slow down problems > > >> > > >> > > >> > I am using the bandwidth controller software from > > >> > www.demarctech.com > > >> > > > >> > Isn't setting RTS to one going to shut down the customer?? > > >> > > > >> > > > >> > ----- Original Message ----- > > >> > From: "Kevin Summers" <[EMAIL PROTECTED]> > > >> > To: <[EMAIL PROTECTED]> > > >> > Sent: Friday, September 26, 2003 3:10 PM > > >> > Subject: RE: [smartBridges] Slow down problems > > >> > > > >> > > > >> > > > >> > Also, how are you throttling bandwidth per customer? > > >> > > > >> > Kevin Summers > > >> > KISTech Internet Services Inc. > > >> > www.kistech.com > > >> > > > >> > > > >> > > > >> > > > >> > > -----Original Message----- > > >> > > From: [EMAIL PROTECTED] > > >> > > [mailto:[EMAIL PROTECTED] Behalf Of Blazen > > >> > > Wireless > > >> > > Sent: Friday, September 26, 2003 3:01 PM > > >> > > To: [EMAIL PROTECTED] > > >> > > Subject: Re: [smartBridges] Slow down problems > > >> > > > > >> > > > > >> > > I also forgot to mention I throttled the one big user down to > > >> 100kbps > > >> and > > >> > > same think its like it has a hold on the APPO at 11 megs (5.5) > > > >> > > and wont let anything else talk to it?? > > >> > > > > >> > > > > >> > > ----- Original Message ----- > > >> > > From: "Blazen Wireless" <[EMAIL PROTECTED]> > > >> > > To: <[EMAIL PROTECTED]> > > >> > > Sent: Friday, September 26, 2003 2:59 PM > > >> > > Subject: Re: [smartBridges] Slow down problems > > >> > > > > >> > > > > >> > > Okay this slow down is really killing me I have all users > > >> > > turned off > > >> that > > >> > > appear to be sending any kind of arp but this was not what was > > >> causing > > >> the > > >> > > slowdowns. I have two users on right now one downloading at > > >> > > 700kbps and the other one my slow customer just trying to surf > > >> > > and cant due it due > > >> to > > >> ping > > >> > > rates we beyond out of control 300-400 and packet loss. > > >> > > > > >> > > I turn off the one customer who is downloading and the > > >> problem resolves. > > >> I > > >> > > called the customer downloading and they are doing Microsoft > > >> patches on > > >> > > their machines right now so its not a virus. What gives why can > > > >> > > one > > >> person > > >> > > not taking up the full bandwidth screw the whole system I > > >> mean every one > > >> > > else is at a dead stand still?? > > >> > > > > >> > > To me this is a problem in the radio APPO not being able to > > >> talk to two > > >> > > radios at the same time at two different speeds this thing is > > >> totally > > >> just > > >> > > sh**ing all over itself? > > >> > > > > >> > > Anyone else see this happen I had the APPO set to 1 meg only 2 > > >> > > meg > > >> and > > >> 5.5 > > >> > > and also 11 but nothing seems to help! I have RTS set to 800 on > > > >> > > the clients and that made no difference I give up this customer > > > >> > > wants me to come > > >> pull > > >> > > the equipment.. > > >> > > > > >> > > Any ideas? > > >> > > HELP! > > >> > > ----- Original Message ----- > > >> > > From: "Mark Radabaugh" <[EMAIL PROTECTED]> > > >> > > To: <[EMAIL PROTECTED]> > > >> > > Sent: Wednesday, September 24, 2003 6:02 PM > > >> > > Subject: Re: [smartBridges] Slow down problems > > >> > > > > >> > > > > >> > > This can get tricky. You need to be on a port that sees all of > > > >> > > the traffic - read that as 'not a switch port'. By definition > a > > >> switch will > > >> > > only show you packets destined for your computer. > > >> > > > > >> > > If you really want to see what going on you need a hub or a > > >> > > managed > > >> switch > > >> > > that can replicate all traffic onto a port. > > >> > > > > >> > > Another option is to use a wireless card in promiscious mode - > > >> > > a mode where > > >> > > you see all of the traffic. Ethereal will do this with (I > > >> think) most > > >> > > common wireless cards. > > >> > > > > >> > > Mark Radabaugh > > >> > > Amplex > > >> > > (419) 720-3635 > > >> > > > > >> > > ----- Original Message ----- > > >> > > From: "Pascal Losier" <[EMAIL PROTECTED]> > > >> > > To: <[EMAIL PROTECTED]> > > >> > > Sent: Wednesday, September 24, 2003 5:41 PM > > >> > > Subject: RE: [smartBridges] Slow down problems > > >> > > > > >> > > > > >> > > > > > >> > > > Just a small question, > > >> > > > > > >> > > > When running ethereal, Do you run it directly on the router > > >> > > > (ex.Mikrotik) or on any system connected to the router. > > >> > > > > > >> > > > Also does it matter if the system running ethereal is log via > > >> PPPOE > > >> ???? > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > -----Original Message----- > > >> > > > From: [EMAIL PROTECTED] > > >> > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > > >> Wireless > > >> > > > Sent: Wednesday, September 24, 2003 6:12 PM > > >> > > > To: [EMAIL PROTECTED] > > >> > > > Subject: Re: [smartBridges] Slow down problems > > >> > > > > > >> > > > > > >> > > > HAHA well then my router has the virus I get like over 2000 > > >> > > > arp > > >> request > > >> > > > from the router in less then 20 min which I think is way out > > >> > > > of > > >> control > > >> > > > it always is asking who has what IP etc. I was told this is > > >> normal in > > >> > > > order for the router to know what IP has what mac etc.. > > >> > > > > > >> > > > ----- Original Message ----- > > >> > > > From: "Scott Damron" <[EMAIL PROTECTED]> > > >> > > > To: <[EMAIL PROTECTED]> > > >> > > > Sent: Wednesday, September 24, 2003 12:15 PM > > >> > > > Subject: RE: [smartBridges] Slow down problems > > >> > > > > > >> > > > > > >> > > > A WHOLE bunch of arp requests. If you run ethereal, you > > >> > > > would see upwards of 30 or 40% ARP requests. Some of the > > >> > > > viruses cause ARP storms. > > >> > > > > > >> > > > Scott > > >> > > > > > >> > > > -----Original Message----- > > >> > > > From: [EMAIL PROTECTED] > > >> > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > > >> Wireless > > >> > > > Sent: Wednesday, September 24, 2003 12:09 PM > > >> > > > To: [EMAIL PROTECTED] > > >> > > > Subject: Re: [smartBridges] Slow down problems > > >> > > > > > >> > > > > > >> > > > What do you mean check arp I know how to check it but what am > > > >> > > > I > > >> looking > > >> > > > for?? > > >> > > > > > >> > > > > > >> > > > ----- Original Message ----- > > >> > > > From: "Scott Damron" <[EMAIL PROTECTED]> > > >> > > > To: <[EMAIL PROTECTED]> > > >> > > > Sent: Wednesday, September 24, 2003 11:37 AM > > >> > > > Subject: RE: [smartBridges] Slow down problems > > >> > > > > > >> > > > > > >> > > > Check ARP. > > >> > > > > > >> > > > Scott > > >> > > > > > >> > > > -----Original Message----- > > >> > > > From: [EMAIL PROTECTED] > > >> > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > > >> Wireless > > >> > > > Sent: Wednesday, September 24, 2003 11:17 AM > > >> > > > To: [EMAIL PROTECTED] > > >> > > > Subject: Re: [smartBridges] Slow down problems > > >> > > > > > >> > > > > > >> > > > I have done that already and there is no ICMP other then me > > >> pinging > > >> the > > >> > > > radios It doesn't happen when there is no one online it only > > >> happens > > >> > > > when a few close users get on and start to surf and then > > >> the far users > > >> > > > have a hard time with dropped packets and slow speeds and > > >> high pings. > > >> I > > >> > > > just thing I need to open up another AP closer to them and > > >> > > > keep > > > > >> > > > my distance down to under 5 miles. The one person having the > > >> hardest time > > >> > > > is about 5.6 miles which is closer then my 7.2 mile customer > > >> > > > who > > >> is > > >> > > > doing great and pointed at the same radio APPO. It might > > >> just be this > > >> > > > person is in a bad area with more interference is what I am > > >> thinking > > >> and > > >> > > > I also may need to raise her ant a smidge.. > > >> > > > > > >> > > > > > >> > > > ----- Original Message ----- > > >> > > > From: <[EMAIL PROTECTED]> > > >> > > > To: <[EMAIL PROTECTED]> > > >> > > > Sent: Wednesday, September 24, 2003 11:47 AM > > >> > > > Subject: Re: [smartBridges] Slow down problems > > >> > > > > > >> > > > > > >> > > > Every time I've experienced interference (numerous times), it > > >> hasn't > > >> > > > affected ping times. From what I've seen, it usually causes > > >> > > > lost packets, but not high latency. I don't know if anyone > has > > >> mentioned > > >> > > > this before (I jumped in in the middle of this thread), but > > >> > > > what > > >> you're > > >> > > > describing sounds exactly like something I experienced a few > > >> > > > weeks > > >> ago. > > >> > > > I had about six users with the Welchia virus, and they were > > >> causing > > >> high > > >> > > > latency all over the network. If you haven't done it > > >> > > > already, put > > >> a > > >> > > > packet sniffer on the network, and see if you're seeing a > > >> lot of icmp > > >> > > > echo traffic. > > >> > > > > > >> > > > Craig > > >> > > > > > >> > > > > > >> > > > Quoting Blazen Wireless <[EMAIL PROTECTED]>: > > >> > > > > > >> > > > > Well maybe this is not the problem now I am back to the > > >> same issues > > >> > > > > pings up to over 100ms and it seems now more with radios > > >> that never > > >> > > > > had problems before I am thinking more of interference > > >> now? How many > > >> > > > > of you have seen a drastic increase in SOHO wireless > > >> routers popping > > >> > > > > up on your site survey tab when setting up a customer, I > > >> > > > > s**t > > >> you > > >> not > > >> > > > > one the other day had 11 > > >> > > > that > > >> > > > > all > > >> > > > > said linksys or the default ssid for dlink stuff. Are those > > >> > > > manufacturers > > >> > > > > within spec it seems more and more are popping up and some > > >> > > > > with > > >> better > > >> > > > > > >> > > > > signal then my tower according to the site survey numbers > > >> in the ABO > > >> > > > /ABI > > >> > > > > > > >> > > > > > > >> > > > > ----- Original Message ----- > > >> > > > > From: "Scott Damron" <[EMAIL PROTECTED]> > > >> > > > > To: <[EMAIL PROTECTED]> > > >> > > > > Sent: Wednesday, September 24, 2003 9:07 AM > > >> > > > > Subject: RE: [smartBridges] Slow down problems > > >> > > > > > > >> > > > > > > >> > > > > Actually, it does not really drop everyone down to 1meg, it > > > >> > > > > just > > >> _MAY_ > > >> > > > > > >> > > > > slow down the 11meg folks in order to respond to the 1meg > > >> person. > > >> Hope > > >> > > > > > >> > > > > that makes sense. > > >> > > > > > > >> > > > > Scott > > >> > > > > -----Original Message----- > > >> > > > > From: [EMAIL PROTECTED] > > >> > > > > [mailto:[EMAIL PROTECTED] On Behalf Of The > > >> Wirefree > > >> > > > > Network > > >> > > > > Sent: Wednesday, September 24, 2003 9:08 AM > > >> > > > > To: [EMAIL PROTECTED] > > >> > > > > Subject: RE: [smartBridges] Slow down problems > > >> > > > > > > >> > > > > > > >> > > > > Huh!??!? This seems bass ackwards. If one client > > >> > > > > associates > > > > >> > > > > at > > >> 1 > > >> > > > > Meg, it drops everyone down to that speed. Not the other > > >> > > > > way > > >> around. > > >> > > > > Weakest link theory. If a client can not associate at 11 > > >> > > > > Meg > > >> and > > >> > > > > steps it's way down to 1 Meg, then it CAN NOT be forced to > > >> connect > > >> at > > >> > > > > 11 Meg. However, a client who is close in with 100% RSSI, > > >> > > > > could > > >> be > > >> > > > > stepped down to 1 Meg based on some far out client. > > >> > > > > > > >> > > > > Sully > > >> > > > > > > >> > > > > -----Original Message----- > > >> > > > > From: [EMAIL PROTECTED] > > >> > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > >> Blazen Wireless > > >> > > > > Sent: Tuesday, September 23, 2003 11:56 PM > > >> > > > > To: [EMAIL PROTECTED] > > >> > > > > Subject: Re: [smartBridges] Slow down problems > > >> > > > > > > >> > > > > I have throttling in place now thats not the issue. The > > >> issue is in > > >> my > > >> > > > > > >> > > > > opinion and theory is at what rate the radios associate > > >> at.. If they > > >> > > > > are only associating at 1 meg or less then yes you will > > >> > > > > have throughput problems, if I have all my close customers > > >> > > > > able > to > > > > >> > > > > associate at 11 megs > > >> > > > > (5.5) and my furthest customers only at 1 meg ( 500kbps) > > >> > > > > then > > >> the > > >> > > > > further users are not going to be able to associate at 1 > > >> > > > > meg but > > >> will > > >> > > > be > > >> > > > > forced to associate at 11 megs and since that is not a > > >> > > > > stable > > >> link > > >> > > > they > > >> > > > > will suffer as I kind of proved tonight but cant be 100% > > >> sure unless > > >> I > > >> > > > > > >> > > > > could verify what speed the users radios are associating at > > > >> > > > > to > > >> the > > >> AP. > > >> > > > > > >> > > > > In theory the AP cant be associated to 3 to 4 radios all at > > >> different > > >> > > > > speeds. They will be associated at the speed of the > > >> slowest radio or > > >> > > > the > > >> > > > > fastest depending on what radio has the best link I think? > > >> > > > > > > >> > > > > ----- Original Message ----- > > >> > > > > From: Vasu (sB Tech Team) > > >> > > > > To: [EMAIL PROTECTED] > > >> > > > > Sent: Tuesday, September 23, 2003 11:27 PM > > >> > > > > Subject: RE: [smartBridges] Slow down problems > > >> > > > > > > >> > > > > That's the basics of 802.11 std, when one user hogs the > > >> > > > > entire bandwidth the remaining users have to share the > > >> > > > > bandwidth, hence bandwidth throttling is important to > ensure > > >> > > > > good and > > >> stable links to > > >> > > > > all users, I think the XO series access point should solve > > >> > > > > your problem which can provide dedicated bandwidth to every > > > >> > > > > user. > > >> > > > > > > >> > > > > Vasu > > >> > > > > -----Original Message----- > > >> > > > > From: [EMAIL PROTECTED] > > >> > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > >> Blazen Wireless > > >> > > > > Sent: Wednesday, September 24, 2003 2:02 PM > > >> > > > > To: '[EMAIL PROTECTED]' > > >> > > > > Subject: [smartBridges] Slow down problems > > >> > > > > > > >> > > > > Okay I think I have figured out the problem with my > > >> system. It seems > > >> > > > > that when users are one (close users) they are associated > > >> > > > > to the > > >> APPO > > >> > > > > at 5.5 to 11 megs possibly and the users that are further > > >> > > > > away > > >> are > > >> at > > >> > > > > 1 meg max well if you have the near users at 11 megs tying > > >> > > > > up > > >> the > > >> > > > > radio and the far uses cant connect at a slower speed for a > > >> better > > >> > > > > link / speed quality then the far users suffer? am I > > >> > > > > correct in > > >> my > > >> > > > > theory does that make any sense? > > >> > > > > > > >> > > > > So going forward we are going to have to plan some more > > >> sites closer > > >> > > > > to the users having issues etc Has anyone else experienced > > >> > > > > this. > > >> I > > >> > > > > cant verify 100% that this is true due to the fact the > > >> radios don't > > >> > > > > report what speed they are associated at? Can someone > > >> think of a way > > >> > > > > to validate this theory?? > > >> > > > > > > >> > > > > Thanks > > >> > > > > > > >> > > > > Martin & Steve > > >> > > > > Blazen Wireless > > >> > > > > www.blazenwireless.com > > >> > > > > > > >> > > > > > > >> > > > > ----------ANNOUNCEMENT---------- > > >> > > > > Don't forget to register for WISPCON IV > > >> > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > > >> > > > > The PART-15.ORG smartBridges Discussion List > > >> > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > > subscribe smartBridges <yournickname> To Remove: > > >> mailto:[EMAIL PROTECTED] > > >> (in > > >> > > > > > >> > > > > the body type unsubscribe > > >> > > > > smartBridges) > > >> > > > > Archives: http://archives.part-15.org > > >> > > > > > > >> > > > > > > >> > > > > ----------ANNOUNCEMENT---------- > > >> > > > > Don't forget to register for WISPCON IV > > >> > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > > >> > > > > The PART-15.ORG smartBridges Discussion List > > >> > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > > subscribe > > >> > > > smartBridges > > >> > > > > <yournickname> > > >> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > >> unsubscribe > > >> > > > > smartBridges) > > >> > > > > Archives: http://archives.part-15.org > > >> > > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > ----------ANNOUNCEMENT---------- > > >> > > > Don't forget to register for WISPCON IV > > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > >> > > > The PART-15.ORG smartBridges Discussion List > > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > subscribe smartBridges <yournickname> To Remove: > > >> mailto:[EMAIL PROTECTED] (in > > >> > > > the body type unsubscribe > > >> > > > smartBridges) > > >> > > > Archives: http://archives.part-15.org > > >> > > > > > >> > > > > > >> > > > ----------ANNOUNCEMENT---------- > > >> > > > Don't forget to register for WISPCON IV > > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > >> > > > The PART-15.ORG smartBridges Discussion List > > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > subscribe smartBridges <yournickname> To Remove: > > >> mailto:[EMAIL PROTECTED] (in > > >> > > > the body type unsubscribe smartBridges) > > >> > > > Archives: http://archives.part-15.org > > >> > > > > > >> > > > > > >> > > > ----------ANNOUNCEMENT---------- > > >> > > > Don't forget to register for WISPCON IV > > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > >> > > > The PART-15.ORG smartBridges Discussion List > > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > subscribe smartBridges <yournickname> To Remove: > > >> mailto:[EMAIL PROTECTED] (in > > >> > > > the body type unsubscribe > > >> > > > smartBridges) > > >> > > > Archives: http://archives.part-15.org > > >> > > > > > >> > > > > > >> > > > ----------ANNOUNCEMENT---------- > > >> > > > Don't forget to register for WISPCON IV > > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > >> > > > The PART-15.ORG smartBridges Discussion List > > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > subscribe smartBridges <yournickname> To Remove: > > >> mailto:[EMAIL PROTECTED] (in > > >> > > > the body type unsubscribe smartBridges) > > >> > > > Archives: http://archives.part-15.org > > >> > > > > > >> > > > > > >> > > > ----------ANNOUNCEMENT---------- > > >> > > > Don't forget to register for WISPCON IV > > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > >> > > > The PART-15.ORG smartBridges Discussion List > > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > subscribe smartBridges <yournickname> To Remove: > > >> mailto:[EMAIL PROTECTED] (in > > >> > > > the body type unsubscribe > > >> > > > smartBridges) > > >> > > > Archives: http://archives.part-15.org > > >> > > > > > >> > > > > > >> > > > ----------ANNOUNCEMENT---------- > > >> > > > Don't forget to register for WISPCON IV > > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > >> > > > The PART-15.ORG smartBridges Discussion List > > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > subscribe smartBridges <yournickname> To Remove: > > >> mailto:[EMAIL PROTECTED] (in > > >> > > > the body type unsubscribe smartBridges) > > >> > > > Archives: http://archives.part-15.org > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > ----------ANNOUNCEMENT---------- > > >> > > > Don't forget to register for WISPCON IV > > >> > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > > >> > > > The PART-15.ORG smartBridges Discussion List > > >> > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > > subscribe > > >> > > smartBridges <yournickname> > > >> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > >> unsubscribe > > >> > > smartBridges) > > >> > > > Archives: http://archives.part-15.org > > >> > > > > > >> > > > > >> > > > > >> > > ----------ANNOUNCEMENT---------- > > >> > > Don't forget to register for WISPCON IV > > >> > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > >> > > The PART-15.ORG smartBridges Discussion List > > >> > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > subscribe smartBridges <yournickname> To Remove: > > >> > > mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > >> > > smartBridges) > > >> > > Archives: http://archives.part-15.org > > >> > > > > >> > > > > >> > > ----------ANNOUNCEMENT---------- > > >> > > Don't forget to register for WISPCON IV > > >> > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > > >> > > The PART-15.ORG smartBridges Discussion List > > >> > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > >> > > subscribe smartBridges <yournickname> To Remove: > > >> > > mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > >> > > smartBridges) > > >> > > Archives: http://archives.part-15.org > > >> > > > >> > ----------ANNOUNCEMENT---------- > > >> > Don't forget to register for WISPCON IV > > >> > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > >> > The PART-15.ORG smartBridges Discussion List > > >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> > smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] > > >> > (in the body type unsubscribe > > >> > smartBridges) > > >> > Archives: http://archives.part-15.org > > >> > > > >> > > > >> > ----------ANNOUNCEMENT---------- > > >> > Don't forget to register for WISPCON IV > > >> > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > > >> > The PART-15.ORG smartBridges Discussion List > > >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> smartBridges <yournickname> > > >> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > >> > unsubscribe > > >> smartBridges) > > >> > Archives: http://archives.part-15.org > > >> > > > >> > > >> ----------ANNOUNCEMENT---------- > > >> Don't forget to register for WISPCON IV > > >> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > >> The PART-15.ORG smartBridges Discussion List > > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > > >> (in the body type unsubscribe > > >> smartBridges) > > >> Archives: http://archives.part-15.org > > >> > > >> > > >> ----------ANNOUNCEMENT---------- > > >> Don't forget to register for WISPCON IV > > >> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > >> The PART-15.ORG smartBridges Discussion List > > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > > >> (in the body type unsubscribe smartBridges) > > >> Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > > Don't forget to register for WISPCON IV > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > (in > > > > > the body type unsubscribe > > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > > > ----------ANNOUNCEMENT---------- > > > Don't forget to register for WISPCON IV > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > (in > > > > > the body type unsubscribe > > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > > > S�mundur Johannsson Technician > > eMax Wireless Internet > > Hlidasmari 8 > > 201 Kopavogur Iceland > > Tel :(354) 5444454 > > FAX :(354) 5444453 > > www.emax.is > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > > > the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > > > the body type unsubscribe smartBridges) > > Archives: http://archives.part-15.org > > > > ** This message does not contain any viruses - scanned by Elektron and > > > Webconnect virusscanner ** > > > > ** This message does not contain any viruses - scanned by Elektron and > > > Webconnect virusscanner ** > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > > > the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > Martin Moreno > Blazen Wireless > 909-907-4106 > www.blazenwireless.com > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > ** This message does not contain any viruses - scanned by Elektron and > Webconnect virusscanner ** > > ** This message does not contain any viruses - scanned by Elektron and > Webconnect virusscanner ** > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > ** This message does not contain any viruses - scanned by Elektron and > Webconnect virusscanner ** > > ** This message does not contain any viruses - scanned by Elektron and > Webconnect virusscanner ** > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
