Alex, To use the dev release of Fifo simply change the line:
echo "http://release.project-fifo.net/pkg/rel"; >> /opt/local/etc/pkgin/repositories.conf to echo "http://release.project-fifo.net/pkg/dev"; >> /opt/local/etc/pkgin/repositories.conf as follow the instructions located here: https://docs.project-fifo.net/docs/installing-fifo I should probably note that starting with this dev version we have removed the need for leo. The down side is that your hypervisors will reach out to the internet every time they need to install a dataset, so if internet is down or the dataset api is down you will not be able to use new datasets (datasets already on the hypervisor will work). This is probably an acceptable tradeoff for a single server or test system. For more information see: https://docs.project-fifo.net/v0.8.2#1-setup-leofs-storage Have fun! Kevin On Fri, Jun 10, 2016 at 11:30 AM, Alex Kritikos <[email protected]> wrote: > Hi all, > > I may have hit that problem. I installed the 2 leo fs zones successfully > and started the services then while installing the fifo zone i got an error > that node is not running: > > [root@4d79462a-6fdb-c7e4-963e-c74ab7e5f462 /data]# svcs -xv epmd snarl > sniffle howl > > svc:/pkgsrc/epmd:default (Erlang Port Mapper Daemon) > > State: online since Fri Jun 10 17:58:12 2016 > > See: /var/svc/log/pkgsrc-epmd:default.log > > Impact: None. > > > svc:/network/snarl:default (Project FiFo's AAA Server.) > > State: maintenance since Fri Jun 10 18:21:38 2016 > > Reason: Restarting too quickly. > > See: http://illumos.org/msg/SMF-8000-L5 > > See: /var/svc/log/network-snarl:default.log > > Impact: This service is not running. > > > svc:/network/sniffle:default (Project FiFo's Central Server.) > > State: maintenance since Fri Jun 10 18:00:38 2016 > > Reason: Restarting too quickly. > > See: http://illumos.org/msg/SMF-8000-L5 > > See: /var/svc/log/network-sniffle:default.log > > Impact: This service is not running. > > > svc:/network/howl:default (Project FiFo's API endpoint.) > > State: maintenance since Fri Jun 10 18:00:57 2016 > > Reason: Restarting too quickly. > > See: http://illumos.org/msg/SMF-8000-L5 > > See: /var/svc/log/network-howl:default.log > > Impact: This service is not running. > > > > Have i hit the AVX dependency issue? If so is there a guide on how to get > the DEV release and try to compile myself? > > BTW the sola flare NIC is Solarstorm series and is not even detected. This > will be a show stopper for me but will get back to it after i get FIFO up. > > Thanks, > > Alex Kritikos > > > On 1 June 2016 at 23:06, the outsider <[email protected]> wrote: > >> Since he is using an R610 i urge to look at the FiFo HCL, since you need >> to have a processor with AVX capabilities. >> >> I assume the R610 will not have a processor with AVX. >> >> >> >> >> >> *Van:* Heinz Nikolaus Gies [mailto:[email protected]] >> *Verzonden:* woensdag 1 juni 2016 20:38 >> *Aan:* SmartOs Discuss <[email protected]> >> *Onderwerp:* Re: [smartos-discuss] Smart OS Installation for home lab >> >> >> >> Hi Alex, >> >> give Project-FiFo[1] a try it runs very well on a single node as there is >> no concept of a headnote or something like that just a few zones (on a >> single node 2-3 depending on how you set it up). >> >> >> >> [1] https://docs.project-fifo.net/docs/installing-fifo >> >> >> >> On Jun 1, 2016, at 19:58, Alex Kritikos <[email protected]> wrote: >> >> >> >> Hello, >> >> I am looking for a guide to install SmartOS on single home lab server, a >> DELL R610 with a Solarflare 10G NIC and an LSI SAS controller attached to a >> 24 disk SAS enclosure. >> >> >> This is happily running ESXI 5.5 for a while now and i recently wanted to >> move to SmartOS. >> I followed the installation guide for COAL first to try on VMWARE fusion >> on my Mac pro. I got everything installed including SDC and then changed >> the configuration to allow provisioning on the head node as i only have 1 >> server. >> As much as i try to create an instance, the provision button is disabled >> and i can not understand why. >> >> Questions: >> >> 1. Is there a guide about installing on a single home lab server? >> 2. Any way of diagnosing why i can not provision? >> 3. Should Solarflare NIC be working at 10GB? >> >> Thanks in advance, >> >> Alex Kritikos >> >> >> >> >> http://www.listbox.com >> >> >> >> > *smartos-discuss* | Archives > <https://www.listbox.com/member/archive/184463/=now> > <https://www.listbox.com/member/archive/rss/184463/27963738-c04b053d> | > Modify > <https://www.listbox.com/member/?&;> > Your Subscription <http://www.listbox.com> > -- Kevin Meziere *Project-**FiFo* Cloud Orchestration Web: Project-fifo.net <https://project-fifo.net/> Docs: Documentation <https://docs.project-fifo.net/en/latest/index.html> Tickets: Ticket Tracker <https://project-fifo.atlassian.net/> ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
