Hi Kevin,

thanks for your response. So i switched to dev and got everything working. I 
left the leafs zones since i had gone through and created them.

Questions:

1. I am unable to create a package with the web UI. I get no error but nothing 
is created
2. My Solaflare Solastorm NIC is not detected. Would i need to install drivers 
to the global zone?
3. When i switched to dev i commented out the release repository. Was that 
wise? does it have anything to do with the fact i have no predefined packages?
4. How do i define aliases for zones? i have 4 now and struggling to remember 
which one is which.
5. I installed grafana, i take it there is no service to run but i have to run 
manually? I also configured it to point to the local dalmatier zone as a data 
source but see no dashboards or how to create one.

Thanks,

Alex Kritikos

> On 10 Jun 2016, at 22:02, Kevin Meziere <[email protected]> wrote:
> 
> Alex,
> 
> To use the dev release of Fifo simply change the line:
> echo "http://release.project-fifo.net/pkg/rel 
> <http://release.project-fifo.net/pkg/rel>" >> 
> /opt/local/etc/pkgin/repositories.conf
> 
> to
> echo "http://release.project-fifo.net/pkg/dev 
> <http://release.project-fifo.net/pkg/dev>" >> 
> /opt/local/etc/pkgin/repositories.conf
> 
> as follow the instructions located here: 
> https://docs.project-fifo.net/docs/installing-fifo 
> <https://docs.project-fifo.net/docs/installing-fifo>
> 
> I should probably note that starting with this dev version we have removed 
> the need for leo. The down side is that your hypervisors will reach out to 
> the internet every time they need to install a dataset, so if internet is 
> down or the dataset api is down you will not be able to use new datasets 
> (datasets already on the hypervisor will work). This is probably an 
> acceptable tradeoff for a single server or test system. For more information 
> see: https://docs.project-fifo.net/v0.8.2#1-setup-leofs-storage 
> <https://docs.project-fifo.net/v0.8.2#1-setup-leofs-storage>
> 
> Have fun!
> Kevin
> 
> On Fri, Jun 10, 2016 at 11:30 AM, Alex Kritikos <[email protected] 
> <mailto:[email protected]>> wrote:
> Hi all,
> 
> I may have hit that problem. I installed the 2 leo fs zones successfully and 
> started the services then while installing the fifo zone i got an error that 
> node is not running:
> 
> [root@4d79462a-6fdb-c7e4-963e-c74ab7e5f462 /data]# svcs -xv epmd snarl 
> sniffle howl
> svc:/pkgsrc/epmd:default (Erlang Port Mapper Daemon)
>  State: online since Fri Jun 10 17:58:12 2016
>    See: /var/svc/log/pkgsrc-epmd:default.log
> Impact: None.
> 
> svc:/network/snarl:default (Project FiFo's AAA Server.)
>  State: maintenance since Fri Jun 10 18:21:38 2016
> Reason: Restarting too quickly.
>    See: http://illumos.org/msg/SMF-8000-L5 
> <http://illumos.org/msg/SMF-8000-L5>
>    See: /var/svc/log/network-snarl:default.log
> Impact: This service is not running.
> 
> svc:/network/sniffle:default (Project FiFo's Central Server.)
>  State: maintenance since Fri Jun 10 18:00:38 2016
> Reason: Restarting too quickly.
>    See: http://illumos.org/msg/SMF-8000-L5 
> <http://illumos.org/msg/SMF-8000-L5>
>    See: /var/svc/log/network-sniffle:default.log
> Impact: This service is not running.
> 
> svc:/network/howl:default (Project FiFo's API endpoint.)
>  State: maintenance since Fri Jun 10 18:00:57 2016
> Reason: Restarting too quickly.
>    See: http://illumos.org/msg/SMF-8000-L5 
> <http://illumos.org/msg/SMF-8000-L5>
>    See: /var/svc/log/network-howl:default.log
> Impact: This service is not running.
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Have i hit the AVX dependency issue? If so is there a guide on how to get the 
> DEV release and try to compile myself?
> 
> BTW the sola flare NIC is Solarstorm series and is not even detected. This 
> will be a show stopper for me but will get back to it after i get FIFO up.
> 
> Thanks,
> 
> Alex Kritikos
> 
> 
> On 1 June 2016 at 23:06, the outsider <[email protected] 
> <mailto:[email protected]>> wrote:
> Since he is using an R610 i urge to look at the FiFo HCL, since you need to 
> have a processor with AVX capabilities. 
> 
> I assume the R610 will not have a processor with AVX. 
> 
>  
> 
>  
> 
> Van: Heinz Nikolaus Gies [mailto:[email protected] 
> <mailto:[email protected]>] 
> Verzonden: woensdag 1 juni 2016 20:38
> Aan: SmartOs Discuss <[email protected] 
> <mailto:[email protected]>>
> Onderwerp: Re: [smartos-discuss] Smart OS Installation for home lab
> 
>  
> 
> Hi Alex,
> 
> give Project-FiFo[1] a try it runs very well on a single node as there is no 
> concept of a  headnote or something like that just a few zones (on a single 
> node 2-3 depending on how you set it up).
> 
>  
> 
> [1] https://docs.project-fifo.net/docs/installing-fifo 
> <https://docs.project-fifo.net/docs/installing-fifo>
>  
> 
> On Jun 1, 2016, at 19:58, Alex Kritikos <[email protected] 
> <mailto:[email protected]>> wrote:
> 
>  
> 
> Hello,
> 
> I am looking for a guide to install SmartOS on single home lab server, a DELL 
> R610 with a Solarflare 10G NIC and an LSI SAS controller attached to a 24 
> disk SAS enclosure.
> 
> 
> This is happily running ESXI 5.5 for a while now and i recently wanted to 
> move to SmartOS.
> I followed the installation guide for COAL first to try on VMWARE fusion on 
> my Mac pro. I got everything installed including SDC and then changed the 
> configuration to allow provisioning on the head node as i only have 1 server.
> As much as i try to create an instance, the provision button is disabled and 
> i can not understand why.
> 
> Questions:
> 
> 1. Is there a guide about installing on a single home lab server?
> 2. Any way of diagnosing why i can not provision?
> 3. Should Solarflare NIC be working at 10GB? 
> 
> Thanks in advance,
> 
> Alex Kritikos
> 
> 
> 
> 
> http://www.listbox.com <http://www.listbox.com/>
> 
> 
>  
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> smartos-discuss | Archives 
> <https://www.listbox.com/member/archive/184463/=now>  
> <https://www.listbox.com/member/archive/rss/184463/27963738-c04b053d> | 
> Modify <https://www.listbox.com/member/?&;> Your Subscription  
> <http://www.listbox.com/>
> 
> 
> -- 
> Kevin Meziere
> Project-FiFo
> Cloud Orchestration
> Web:  Project-fifo.net <https://project-fifo.net/>
> Docs: Documentation <https://docs.project-fifo.net/en/latest/index.html>
> Tickets:      Ticket Tracker <https://project-fifo.atlassian.net/>
> smartos-discuss | Archives 
> <https://www.listbox.com/member/archive/184463/=now>  
> <https://www.listbox.com/member/archive/rss/184463/28202049-71f455c3> | 
> Modify <https://www.listbox.com/member/?&;> Your Subscription  
> <http://www.listbox.com/>



-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription: 
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com

Reply via email to