Furthermore, i rebooted the global zone a few times as i wanted to ensure it always boots straight into smart os and now i am unable to login to fifo as admin/admin (but the zone has autostrated)
Any hints? Alex > On 11 Jun 2016, at 13:30, Alex Kritikos <[email protected]> wrote: > > Hi Kevin, > > thanks for your response. So i switched to dev and got everything working. I > left the leafs zones since i had gone through and created them. > > Questions: > > 1. I am unable to create a package with the web UI. I get no error but > nothing is created > 2. My Solaflare Solastorm NIC is not detected. Would i need to install > drivers to the global zone? > 3. When i switched to dev i commented out the release repository. Was that > wise? does it have anything to do with the fact i have no predefined packages? > 4. How do i define aliases for zones? i have 4 now and struggling to remember > which one is which. > 5. I installed grafana, i take it there is no service to run but i have to > run manually? I also configured it to point to the local dalmatier zone as a > data source but see no dashboards or how to create one. > > Thanks, > > Alex Kritikos > >> On 10 Jun 2016, at 22:02, Kevin Meziere <[email protected] >> <mailto:[email protected]>> wrote: >> >> Alex, >> >> To use the dev release of Fifo simply change the line: >> echo "http://release.project-fifo.net/pkg/rel >> <http://release.project-fifo.net/pkg/rel>" >> >> /opt/local/etc/pkgin/repositories.conf >> >> to >> echo "http://release.project-fifo.net/pkg/dev >> <http://release.project-fifo.net/pkg/dev>" >> >> /opt/local/etc/pkgin/repositories.conf >> >> as follow the instructions located here: >> https://docs.project-fifo.net/docs/installing-fifo >> <https://docs.project-fifo.net/docs/installing-fifo> >> >> I should probably note that starting with this dev version we have removed >> the need for leo. The down side is that your hypervisors will reach out to >> the internet every time they need to install a dataset, so if internet is >> down or the dataset api is down you will not be able to use new datasets >> (datasets already on the hypervisor will work). This is probably an >> acceptable tradeoff for a single server or test system. For more information >> see: https://docs.project-fifo.net/v0.8.2#1-setup-leofs-storage >> <https://docs.project-fifo.net/v0.8.2#1-setup-leofs-storage> >> >> Have fun! >> Kevin >> >> On Fri, Jun 10, 2016 at 11:30 AM, Alex Kritikos <[email protected] >> <mailto:[email protected]>> wrote: >> Hi all, >> >> I may have hit that problem. I installed the 2 leo fs zones successfully and >> started the services then while installing the fifo zone i got an error that >> node is not running: >> >> [root@4d79462a-6fdb-c7e4-963e-c74ab7e5f462 /data]# svcs -xv epmd snarl >> sniffle howl >> svc:/pkgsrc/epmd:default (Erlang Port Mapper Daemon) >> State: online since Fri Jun 10 17:58:12 2016 >> See: /var/svc/log/pkgsrc-epmd:default.log >> Impact: None. >> >> svc:/network/snarl:default (Project FiFo's AAA Server.) >> State: maintenance since Fri Jun 10 18:21:38 2016 >> Reason: Restarting too quickly. >> See: http://illumos.org/msg/SMF-8000-L5 >> <http://illumos.org/msg/SMF-8000-L5> >> See: /var/svc/log/network-snarl:default.log >> Impact: This service is not running. >> >> svc:/network/sniffle:default (Project FiFo's Central Server.) >> State: maintenance since Fri Jun 10 18:00:38 2016 >> Reason: Restarting too quickly. >> See: http://illumos.org/msg/SMF-8000-L5 >> <http://illumos.org/msg/SMF-8000-L5> >> See: /var/svc/log/network-sniffle:default.log >> Impact: This service is not running. >> >> svc:/network/howl:default (Project FiFo's API endpoint.) >> State: maintenance since Fri Jun 10 18:00:57 2016 >> Reason: Restarting too quickly. >> See: http://illumos.org/msg/SMF-8000-L5 >> <http://illumos.org/msg/SMF-8000-L5> >> See: /var/svc/log/network-howl:default.log >> Impact: This service is not running. >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> Have i hit the AVX dependency issue? If so is there a guide on how to get >> the DEV release and try to compile myself? >> >> BTW the sola flare NIC is Solarstorm series and is not even detected. This >> will be a show stopper for me but will get back to it after i get FIFO up. >> >> Thanks, >> >> Alex Kritikos >> >> >> On 1 June 2016 at 23:06, the outsider <[email protected] >> <mailto:[email protected]>> wrote: >> Since he is using an R610 i urge to look at the FiFo HCL, since you need to >> have a processor with AVX capabilities. >> >> I assume the R610 will not have a processor with AVX. >> >> >> >> >> >> Van: Heinz Nikolaus Gies [mailto:[email protected] >> <mailto:[email protected]>] >> Verzonden: woensdag 1 juni 2016 20:38 >> Aan: SmartOs Discuss <[email protected] >> <mailto:[email protected]>> >> Onderwerp: Re: [smartos-discuss] Smart OS Installation for home lab >> >> >> >> Hi Alex, >> >> give Project-FiFo[1] a try it runs very well on a single node as there is no >> concept of a headnote or something like that just a few zones (on a single >> node 2-3 depending on how you set it up). >> >> >> >> [1] https://docs.project-fifo.net/docs/installing-fifo >> <https://docs.project-fifo.net/docs/installing-fifo> >> >> >> On Jun 1, 2016, at 19:58, Alex Kritikos <[email protected] >> <mailto:[email protected]>> wrote: >> >> >> >> Hello, >> >> I am looking for a guide to install SmartOS on single home lab server, a >> DELL R610 with a Solarflare 10G NIC and an LSI SAS controller attached to a >> 24 disk SAS enclosure. >> >> >> This is happily running ESXI 5.5 for a while now and i recently wanted to >> move to SmartOS. >> I followed the installation guide for COAL first to try on VMWARE fusion on >> my Mac pro. I got everything installed including SDC and then changed the >> configuration to allow provisioning on the head node as i only have 1 server. >> As much as i try to create an instance, the provision button is disabled and >> i can not understand why. >> >> Questions: >> >> 1. Is there a guide about installing on a single home lab server? >> 2. Any way of diagnosing why i can not provision? >> 3. Should Solarflare NIC be working at 10GB? >> >> Thanks in advance, >> >> Alex Kritikos >> >> >> >> >> http://www.listbox.com <http://www.listbox.com/> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> smartos-discuss | Archives >> <https://www.listbox.com/member/archive/184463/=now> >> <https://www.listbox.com/member/archive/rss/184463/27963738-c04b053d> | >> Modify <https://www.listbox.com/member/?&;> Your Subscription >> <http://www.listbox.com/> >> >> >> -- >> Kevin Meziere >> Project-FiFo >> Cloud Orchestration >> Web: Project-fifo.net <https://project-fifo.net/> >> Docs: Documentation >> <https://docs.project-fifo.net/en/latest/index.html> >> Tickets: Ticket Tracker <https://project-fifo.atlassian.net/> >> smartos-discuss | Archives >> <https://www.listbox.com/member/archive/184463/=now> >> <https://www.listbox.com/member/archive/rss/184463/28202049-71f455c3> | >> Modify <https://www.listbox.com/member/?&;> Your Subscription >> <http://www.listbox.com/> ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
