Anyone?
> On 01 Aug 2016, at 20:59, Alex Kritikos <[email protected]> wrote: > > Hi Kevin / all . > > I have finally found the time to recreate my fifo installation using the dev > release for everything and as its on the latest smartos image in the global > zone i finally have my sola flare NIC working at 10G. > So here is my problem now: > > After i completed the installation i did not install metrics / grafana etc > but wanted to first evaluate the basics. > In the process i have created some VMs that i am actually using representing > an AFP file server zone etc etc which all seems to work great and achieving > fantastic speeds (and i haven’t yet configured my pools the way i intend to). > > So i thought great lets now install the metrics evaluation packages as > described in: https://docs.project-fifo.net/docs/ddb-installation > <https://docs.project-fifo.net/docs/ddb-installation> > > Everything went fine however as soon as i edited my sniffle, snarl and howl > config files to point to the new DDB zone, i now login to FIFO and see > nothing as if it was a new installation. If i login to DDB web UI i can see > buckets for fifo (previous stuff) , tachyon (new) and dalmatinerdb (new and i > guess the one in use). > > I am really hoping there is a way to mirror my assets to the new bucket and > not start from scratch? after all my zones already exist and are fully > functional. > > Any ideas? > > Thanks, > > Alex Kritikos > >> On 13 Jun 2016, at 12:15, Alex Kritikos <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hi Kevin, >> >> the service that seems to first crash is chunter: >> >> [ Jun 13 08:18:22 Executing start method ("/opt/chunter/bin/chunter start"). >> ] >> [ Jun 13 08:18:22 Method "start" exited with status 0. ] >> [ Jun 13 08:18:37 Stopping because all processes in service exited. ] >> [ Jun 13 08:18:37 Executing stop method ("/opt/chunter/bin/chunter stop"). ] >> Node '[email protected] <mailto:[email protected]>' not responding to pings. >> We died with exit code 1 but still exit properly >> >> >> The prtconf -d output for the device is: >> >> pci1924,7207 (pciex1924,803) [Solarflare Communications SFC9020 >> [Solarstorm]] (driver not attached) >> pci1924,7207 (pciex1924,803) [Solarflare Communications SFC9020 >> [Solarstorm]] (driver not attached) >> >> >> I am running version joyent_20160204T080230Z >> >> Please note however that i was initially running a later version and i >> switched back when i realised fifo had not been tested against this. Would i >> need to repeat the installation? >> Also, i had initially installed the release version of the services in the >> zone and then i switched to the dev version due to the issues i encountered. >> I did recreate the zones but chunter had been in installed in the GZ and i >> simply installed the dev version on top. Do i need to repeat some steps? >> >> Thanks, >> >> Alex >> >>> On 12 Jun 2016, at 08:18, Kevin Meziere <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>>> 1. I am unable to create a package with the web UI. I get no error but >>>> nothing is created >>>> Check the error logs first. Also check that your user has permissions >>>> to create packages. >>>> >>>> 3. When i switched to dev i commented out the release repository. Was >>>> that wise? does it have anything to do with the fact i have no predefined >>>> packages? >>>> Should be fine >>>> >>>> 4. How do i define aliases for zones? i have 4 now and struggling to >>>> remember which one is which. >>>> On the VM detail page it should be doable >>>> >>>> 5. I installed grafana, i take it there is no service to run but i have to >>>> run manually? I also configured it to point to the local dalmatier zone as >>>> a data source but see no dashboards or how to create one. >>>> Best to ask in #project-fifo IRC channel. We will need to get some >>>> more detail on your setup. >>>> >>>> Re the unable to login after reboot >>>> Check that you do not have another zone with fifo installed on it >>>> that autostarted when you rebooted. >>> >>> >>> On Sat, Jun 11, 2016 at 3:20 PM, Robert Mustacchi <[email protected] >>> <mailto:[email protected]>> wrote: >>> On 6/11/16 3:30 , Alex Kritikos wrote: >>> > 2. My Solaflare Solastorm NIC is not detected. Would i need to install >>> > drivers to the global zone? >>> >>> What's the PCI ID of that device? Can you run prtconf -d? Also, what >>> version of SmartOS are you running (uname -v in the GZ)? >>> >>> Robert >>> >>> >>> http://www.listbox.com <http://www.listbox.com/> >>> >>> >>> >>> -- >>> Kevin Meziere >>> Project-FiFo >>> Cloud Orchestration >>> Web: Project-fifo.net <https://project-fifo.net/> >>> Docs: Documentation >>> <https://docs.project-fifo.net/en/latest/index.html> >>> Tickets: Ticket Tracker <https://project-fifo.atlassian.net/> >>> smartos-discuss | Archives >>> <https://www.listbox.com/member/archive/184463/=now> >>> <https://www.listbox.com/member/archive/rss/184463/28202049-71f455c3> | >>> Modify <https://www.listbox.com/member/?&;> Your Subscription >>> <http://www.listbox.com/> > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
