On 8/3/16 10:36 , Alex Kritikos wrote: > Anyone? Hi Alex,
I think that Project FiFo has their own dedicated mailing list. I'm not sure how many of the folks using it are on here or not. I'd imagine that most likely are. So while I can help with a lot of the platform related questions, I can't help with FiFo. Robert >> On 01 Aug 2016, at 20:59, Alex Kritikos <[email protected]> wrote: >> >> Hi Kevin / all . >> >> I have finally found the time to recreate my fifo installation using the dev >> release for everything and as its on the latest smartos image in the global >> zone i finally have my sola flare NIC working at 10G. >> So here is my problem now: >> >> After i completed the installation i did not install metrics / grafana etc >> but wanted to first evaluate the basics. >> In the process i have created some VMs that i am actually using representing >> an AFP file server zone etc etc which all seems to work great and achieving >> fantastic speeds (and i haven’t yet configured my pools the way i intend to). >> >> So i thought great lets now install the metrics evaluation packages as >> described in: https://docs.project-fifo.net/docs/ddb-installation >> <https://docs.project-fifo.net/docs/ddb-installation> >> >> Everything went fine however as soon as i edited my sniffle, snarl and howl >> config files to point to the new DDB zone, i now login to FIFO and see >> nothing as if it was a new installation. If i login to DDB web UI i can see >> buckets for fifo (previous stuff) , tachyon (new) and dalmatinerdb (new and >> i guess the one in use). >> >> I am really hoping there is a way to mirror my assets to the new bucket and >> not start from scratch? after all my zones already exist and are fully >> functional. >> >> Any ideas? >> >> Thanks, >> >> Alex Kritikos >> >>> On 13 Jun 2016, at 12:15, Alex Kritikos <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Hi Kevin, >>> >>> the service that seems to first crash is chunter: >>> >>> [ Jun 13 08:18:22 Executing start method ("/opt/chunter/bin/chunter >>> start"). ] >>> [ Jun 13 08:18:22 Method "start" exited with status 0. ] >>> [ Jun 13 08:18:37 Stopping because all processes in service exited. ] >>> [ Jun 13 08:18:37 Executing stop method ("/opt/chunter/bin/chunter stop"). ] >>> Node '[email protected] <mailto:[email protected]>' not responding to pings. >>> We died with exit code 1 but still exit properly >>> >>> >>> The prtconf -d output for the device is: >>> >>> pci1924,7207 (pciex1924,803) [Solarflare Communications SFC9020 >>> [Solarstorm]] (driver not attached) >>> pci1924,7207 (pciex1924,803) [Solarflare Communications SFC9020 >>> [Solarstorm]] (driver not attached) >>> >>> >>> I am running version joyent_20160204T080230Z >>> >>> Please note however that i was initially running a later version and i >>> switched back when i realised fifo had not been tested against this. Would >>> i need to repeat the installation? >>> Also, i had initially installed the release version of the services in the >>> zone and then i switched to the dev version due to the issues i >>> encountered. I did recreate the zones but chunter had been in installed in >>> the GZ and i simply installed the dev version on top. Do i need to repeat >>> some steps? >>> >>> Thanks, >>> >>> Alex >>> >>>> On 12 Jun 2016, at 08:18, Kevin Meziere <[email protected] >>>> <mailto:[email protected]>> wrote: >>>> >>>>> 1. I am unable to create a package with the web UI. I get no error but >>>>> nothing is created >>>>> Check the error logs first. Also check that your user has permissions >>>>> to create packages. >>>>> >>>>> 3. When i switched to dev i commented out the release repository. Was >>>>> that wise? does it have anything to do with the fact i have no predefined >>>>> packages? >>>>> Should be fine >>>>> >>>>> 4. How do i define aliases for zones? i have 4 now and struggling to >>>>> remember which one is which. >>>>> On the VM detail page it should be doable >>>>> >>>>> 5. I installed grafana, i take it there is no service to run but i have >>>>> to run manually? I also configured it to point to the local dalmatier >>>>> zone as a data source but see no dashboards or how to create one. >>>>> Best to ask in #project-fifo IRC channel. We will need to get some >>>>> more detail on your setup. >>>>> >>>>> Re the unable to login after reboot >>>>> Check that you do not have another zone with fifo installed on it >>>>> that autostarted when you rebooted. >>>> >>>> >>>> On Sat, Jun 11, 2016 at 3:20 PM, Robert Mustacchi <[email protected] >>>> <mailto:[email protected]>> wrote: >>>> On 6/11/16 3:30 , Alex Kritikos wrote: >>>>> 2. My Solaflare Solastorm NIC is not detected. Would i need to install >>>>> drivers to the global zone? >>>> >>>> What's the PCI ID of that device? Can you run prtconf -d? Also, what >>>> version of SmartOS are you running (uname -v in the GZ)? >>>> >>>> Robert >>>> >>>> >>>> http://www.listbox.com <http://www.listbox.com/> >>>> >>>> >>>> >>>> -- >>>> Kevin Meziere >>>> Project-FiFo >>>> Cloud Orchestration >>>> Web: Project-fifo.net <https://project-fifo.net/> >>>> Docs: Documentation >>>> <https://docs.project-fifo.net/en/latest/index.html> >>>> Tickets: Ticket Tracker <https://project-fifo.atlassian.net/> >>>> smartos-discuss | Archives >>>> <https://www.listbox.com/member/archive/184463/=now> >>>> <https://www.listbox.com/member/archive/rss/184463/28202049-71f455c3> | >>>> Modify <https://www.listbox.com/member/?&;> Your Subscription >>>> <http://www.listbox.com/> >> > > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
